***The Vapers Lounge*** 2.0

Status
Not open for further replies.
Cheers guys, only went with 0.6% nic any way, I don't need much.

So the lower the ohms, the higher the wattage, gotcha!

Might just be that their juice isn't great, I just grabbed a few flavours as part of the order.

Is there a certain PG/VG ratio that is best for this mod? I don't really understand how the differences affect things, and I won't be going the whole custom hog, this is just so I can smoke with my gf without having to have actual cigs :p

Pg is thin runny and delivers the flavour/nicotine

Vg is thick gloopy and makes for creaminess and big heavy clouds

I personally like the heavier mix's, but i've found my current tank setup doesnt like thin stuff. Generally 50/50 is a good mix for most stuff, if its thin some tanks can leak but likewise too thick and it just wont wick quick enough.

Generally juice buying consists of buying a bunch of 10ml then getting more of what flavour/mix you like
 
Almost complete nightmare!!! Dropped a full 100ml bottle, the stem sheared clean off the bottle, thankfully with vg being so thick I only lost around 25-30ml on the floor, fortunately I had a couple of spare 50ml bottles to drain the rest off into.
 
Just placed an order with Vape Goo will let you know what they are like?
Trying to finish up some juices i have started currently on Ruthless SherBAE, not a bad sherbert flavour but not really what i like.
 
Just went for a joyetech cuboid from fasttech, as well as an aspire cleito (ordered from the rainforest, as fasttech wouldnt allow paypal payment with it). Seems batteries are not currently being delivered to the UK via any shipping method, so ordered a couple of Samsung 30Q's from ecoluxshop on ebay.

Hope I wont be disappointed with all of the above, quite looking forward to it. Still thoroughly enjoy my subtank mini and istick 50, but just fancy a change.

I've ordered a few new juices from Vape Goo. Up till now, all I've vaped is Custard Cream from Spectrum Vaping. But I want to try something different so gone for Pink Lemonade, Cookie Dough Cheese Cake, Strawberry Shortcake. Is it always best to use a new coil when changing flavour? If trying new flavours, what does everybody do, as surely you'd end up wasting a lot of coils?
 
Just went for a joyetech cuboid from fasttech, as well as an aspire cleito (ordered from the rainforest, as fasttech wouldnt allow paypal payment with it). Seems batteries are not currently being delivered to the UK via any shipping method, so ordered a couple of Samsung 30Q's from ecoluxshop on ebay.

Hope I wont be disappointed with all of the above, quite looking forward to it. Still thoroughly enjoy my subtank mini and istick 50, but just fancy a change.

I've ordered a few new juices from Vape Goo. Up till now, all I've vaped is Custard Cream from Spectrum Vaping. But I want to try something different so gone for Pink Lemonade, Cookie Dough Cheese Cake, Strawberry Shortcake. Is it always best to use a new coil when changing flavour? If trying new flavours, what does everybody do, as surely you'd end up wasting a lot of coils?

A dripper (RDA) is the best way of quickly trying a bunch of new juice. I have about 7 different tanks on the go so keep different flavours (or flavour groups) in different tanks. Means I don't end up messing about with new coils when going from a menthol to a custard for example.

If you're swapping between similar flavours then just run the tank empty and refill with new juice and the new flavour will come through after 10 or so pulls
 
Would the 0.2 ohm coil be better than the 0.5 i'm currently using in the Cleito?
Mine came with a 0.4...
Probably better in terms of vapour and flavour, yes, but almost certainly not in terms of juice economy!
I haven't even tried my 0.2 yet! :D

I can drive it at 50W which is the recommended but was just wondering for future purchases of coils.
55-70w, surely? It says so on the side.
0.4ohm is 40-60w, although it fires reasonably well as low as 20w.

Top of my Aspire Clieto just would not come off, resorted to covering with towel and using my teeth and it just cracked.
Gotta be careful with these things. You should only need to tighten them until they start to bind. One of the biggest RMA complaints at all our B&Ms is people overtightening things and busting the threads.

Hope I wont be disappointed with all of the above, quite looking forward to it. Still thoroughly enjoy my subtank mini and istick 50, but just fancy a change.
It's my current setup and the absolute best I've ever had, for either Mod or tank!
By contrast, I have a SubTank Mini and it's the absolute worst tank I've ever had...

Is it always best to use a new coil when changing flavour? If trying new flavours, what does everybody do, as surely you'd end up wasting a lot of coils?
Use a dripper (I have a Wotofo Sapor, which cost maybe £20) to try everything and then use the ones you like best in your tanks.
 
Use a dripper (I have a Wotofo Sapor, which cost maybe £20) to try everything and then use the ones you like best in your tanks.

Just looking into RDAs, never ventured into that territory before. Which other RDAs are recommended? What are pros and cons to look for? Im thinking dual coil would be a good starter and obviously one that doesn't leak!
 
Just ordered the innokin t22 to get me started. Not sure what to expect. Got some ice menthol liquid to go with it.
 
Just looking into RDAs, never ventured into that territory before. Which other RDAs are recommended? What are pros and cons to look for? Im thinking dual coil would be a good starter and obviously one that doesn't leak!
I chose the Sapor because it was a cheap one to try dripping with, but with good reviews in terms of features, box contents, building space and performance.
Only con I can think of is the learning curve when you first start building, during which you're bound to get a few dry hits (which taste like Satan's Ass). But that's just a little bit of practice.

As far as leaking goes, none of them should. But remember it's just an open-topped atomizer, so the idea is you vape off the juice before you stuff it in your pocket anyway, so it can't leak.
You're perhaps thinking of an RTA or RDTA?
 
Pic of the messy filthy coils/wick as promised...think I got 4 weeks from them both. The coils cleaned up though so still running..Changed the wick though.
2sB5Dpsl.jpg1


Also, got delivery of my new 30Qs from Ecoluxe and they came in this box with a sticker on it...must be genuine as the sticker (that doesn't state a Manufacturer) says so.
80tv8F0l.jpg
 
Last edited:
Ooo Dat look funky:eek:

Scarily familiar.

I dont know how good it is for the coils, but i've found dry burn then air cool then drip a few drops of water on the coil and dry burn repeated a few times seems to bring them up like new.

I'll let you know when this clapton dies if its bad for them, there's no thermal shock but boiling water may equal rust methinks
 
Dry burn then blast with compressed air, rinse and repeat 4-5 times, come up fine for me :)

p.s. you should post that coil pic to /r/coilgore :p
 
I chose the Sapor because it was a cheap one to try dripping with, but with good reviews in terms of features, box contents, building space and performance.
Only con I can think of is the learning curve when you first start building, during which you're bound to get a few dry hits (which taste like Satan's Ass). But that's just a little bit of practice.

As far as leaking goes, none of them should. But remember it's just an open-topped atomizer, so the idea is you vape off the juice before you stuff it in your pocket anyway, so it can't leak.
You're perhaps thinking of an RTA or RDTA?

Thanks, ordered a Sapor from fasttech. I think my main use would be just to try juices out, but reading up, I'm hoping the flavour will be mindblowing compared to a normal atomizer.
 
Status
Not open for further replies.
Back
Top Bottom