***The Vapers Lounge*** 3.0

Is the Cleito RTA worth getting for my Cleito, never built coils before, Would I also need a new box mod? Mine only does 50W none of the TC stuff either?

I'm not really getting that headrush feeling unless I do the whole tank in 10 minutes... Which will do a full battery charge aswell. My battery doesn't hold charge very well anymore. It is over a year old with constant daily use and charging.

TLDR - Is the Cleito RTA bit worth getting for a newbie, also please recommend a box mod to go with said RTA please.

I'm running .4ohm at 42w right now.
 
I have had mine a week now I really like the Cleito RTA deck. Its big and easy to build on. Just make sure you practice wicking as I was sloppy last night and got a few mini leaks but my wicking before was leak free. You can also get a 5ml glad extension for more juice capacity.
For the mod box I have the Langer tech 120w dual 18650. They can be had for 30 quid and its a decent box, tc and normal mode. I am awaiting some Ss316L Clapton wire for the Cleito so I can use TC and normal. The Kanger mod last 2 days withheavy use but my batteries are due a refresh.

Vampire vape have the 120 mod for cheap right now.

PS: I run dual Clapton's 3mm dia 0.4ohm at 49w 3mg 70/30 and its smooth and great flavour.
 
A few people i know have had leaking probs & it seems it is down to the leads ,https://www.youtube.com/watch?v=Bu9J5cIMUyk

I did try that last night but no joy. I don't want to keep wasting juice either, even though it is juice I make.

How high are you running it and are you chain-vaping?
Almost every tank (apart from maybe the cup design ones) will leak if the tank gets really hot and either the air inside expands to push the juice out, or it creates a vacuum when it cools down and leaks 'backwards'.

I am running it on a Fuchai 213 in TC mode at 170C. Not too hot and not chaining it. I have been using Kanger sub ohm tanks for months and months without a single leak and I do chain those. I might just be unlucky but will try the other coil and build on the RBA if needs be. I really like the tank and flavour, so don't want to give up on it.

Good luck.

Be sure you drop your retailer a message too in case you have to return it for replacement.

Cheers and will do :)
 
I did try that last night but no joy. I don't want to keep wasting juice either, even though it is juice I make.



I am running it on a Fuchai 213 in TC mode at 170C. Not too hot and not chaining it. I have been using Kanger sub ohm tanks for months and months without a single leak and I do chain those. I might just be unlucky but will try the other coil and build on the RBA if needs be. I really like the tank and flavour, so don't want to give up on it.



Cheers and will do :)

I got my TFV8 on Wednesday and been using it since on a Smok X Cube II & H-Priv just dripped juice on the stock coil 0.15 to prime it, filled the tank and left to sit for 10 mins, closed all the air holes and sucked on the tank for a few seconds and started low I think 40W until that awful new coils taste goes. Currently at 140W and it's been totally spot on.

I find if I rush or don't do the above on any tank and coil I use they leak or burn really easily.

This morning I filled the tank and accidentally overfilled allowing some juice to flow down the CEnter part, this caused a slight leak but it cleared.

Could also be the juice too I use 80/20 DIY any thinner and I find some tanks tend to leak a little. Maybe try thicker juice if you run 50/50 or something.

Anyway it's an AMAZING tank :D
 
A good update from me. I removed all the O rings and seals and replaced them with the spares. I doused them all in VG juice first and rebuilt the tank. Filled it up last night before going to bed and no leaking at all and "touch wood" I can take it to work with me this afternoon and not worry about it leaking everywhere. I have had a few puffs this morning from it as well and still good. Fingers crossed :)

I couldn't see anything wrong with the old seals mind.
 
Got the Rhubarb and Custard from rejuiced just now, gave it a really good shake to mix it up incase the flavs seperated which turned it from white to a slightly cloudy yellowy color but still rather transparent and clear.

First thoughts, not great so far. Im on magma 1.0ohm dual coil i just dry burned and put fresh wick in too and drew out the old blue slush with kitchen towel from juice wells. Tried 18w which was about 4.2v. Might just need a steep for a bit i dunno. Might need higher watts i dunno.

Btw i wanted to ask. You reckon id be ok and not burn cotton or mess the coil up if i vaped at 30w with this 1.0ohm dual coil setup in the magma? I dunno what the range is for 1.0ohm dual coils u see.

I can taste the rhubarb but its not a great rhubarb compared to onepoundliquids i had once. Cant taste any custard tbh.
 
Last edited:
A good update from me. I removed all the O rings and seals and replaced them with the spares. I doused them all in VG juice first and rebuilt the tank. Filled it up last night before going to bed and no leaking at all and "touch wood" I can take it to work with me this afternoon and not worry about it leaking everywhere. I have had a few puffs this morning from it as well and still good. Fingers crossed :)

I couldn't see anything wrong with the old seals mind.

Good good :)











I've had a few orders over the last few weeks from Dragon's Rise, Rejuiced and Chuff Stuff.

The Dragon's Rise Blue Slush Puppy is really nice... tastes just like the real thing. Rejuiced Blue Slush doesn't hit the mark, it's quite blueberry like but it's missing any real sweetness to it so I'm not a huge fan.

Dragon's Rise Campfire Custard is really good too, as is Pink Lemonade.

Chuff Stuff Eve's Seduction... officially the most disgusting juice I've ever sampled. Smelled really nice to begin with but makes me want to puke when vaping it... took a few alcohol washes to get that taste out of the tank.

Chuff Stuff Mamma's & Ginger Waffles both really nice.

Still god quite a few left to sample.
 
Last edited:
Just got these to try out

ABB29D28-3E0C-413A-AF10-128B6C8816DA_zps0cb2wu1l.jpg
 
Got the Serpent Mini today from gb , got a problem though i cant remove the bottom section.
Any tips to get it off before i resort to mole grips.

 
If I can't can an atty apart I usually wrap a plumber's wrench in tape and grip it gently.

Cheers but managed to remove it by putting a tweezer leg in the air hole and holding the top of the tank with the filler cap removed with needle nose pliers.
Suprisingly it twisted off with very little force.
 
Cheers but managed to remove it by putting a tweezer leg in the air hole and holding the top of the tank with the filler cap removed with needle nose pliers.
Suprisingly it twisted off with very little force.

Best to put it on and off a hell of a lot of times to work the threads in... then wash it well again before building it.

When I got mine, it would just keep cross threading.....
 
Always find when an Atty is stuck together its down to dry orings...give everything a little wipe down with some liquid will help :)

Limitless rdta...the plus worth getting over the regular one? Besides a larger tank capacity and costing three times as much I can't see much else different between the two?
 
Nevermind, ordered an Ijoy Tornado Nano from FT for £10 - sale on use 'DEALS' coupon for 10% off :)

Speaking of sales, wireandstuff are having a site wide 15% off sale.

Was hard work but I managed to spend £20 to get free delivery:

1 x 'Alien wire' aka chinese flat clapton 5M
1 x 24x2 N80 x 34 A1 Fused clapton 5M
1 x 22awg N80 20M
1 x 23awg 316L 20M
1 x 24x32 clapton N80 5M
1 x 22awg A1 20M

£20.34 all in and delivered :D
 
Pulled the trigger on a Smok TFV8 from Amazon last night - was supposed to be delivered today but apparently delivery was attempted and I was out... Strange because I've been sitting in all sodding day waiting for it!!

Was looking forward to my vape mail :(
 
Back
Top Bottom