***The Vapers Lounge*** 3.0

Direct from Inawera! The site is a little bit tricky to navigate but their prices are very reasonable even with shipping, when you do the conversion and factor in how strong their concentrates are. Their peach, mango and coconut are excellent too.

Thanks man!

I've had Lime, Raspberry & Grapefruit from INW, Grapefruit being one of my favourites. It's that slap you in the face tartness you get from fresh Grapefruit - delicious.

Care to share your R&C recipe too? :p
 
Thanks man!

I've had Lime, Raspberry & Grapefruit from INW, Grapefruit being one of my favourites. It's that slap you in the face tartness you get from fresh Grapefruit - delicious.

Care to share your R&C recipe too? :p

I grabbed the Raspberry too, it's very similar to FA's, not sure which I prefer. Both very nice!

Rhubarb 'n' Custard:
1.5% INW Rhubarb
1.5% FA Fresh Cream
1.5% TFA Vanillin (I'd use an FA vanilla, this was just all I had)
4% CAP Vanilla Custard V2

I'm sure that can be improved on a lot, but that was my first attempt and I liked it enough to make a 250ml that I'm still working my way through :p My mate also liked it enough to want to use my rhubarb to make some. He used his V1 custard though, which was admittedly nicer, but not enough to warrant nasties IMO.
 
Take a photo of your build so we can have a look. It might be a simple fix, like you said with a rebuild and rewick.

Just rewicked it, seems better but man i tell u somit. When i hadnt used it in awhile and took it all apart and soaked it in hot water for a day. When i finally got round to putting wick on and trying one of my new juices the air holes and air draw were great like super airy on largest holes. After awhile and a few rewicks but still same coils. Its airyness on largest hole is like pap and is like medium hole. I have tried to roll up cotton or kitchen towel to see if its juice stuck in there but even tho it does suck a little up i cant really get in very far as its a elbow airhole system kinda thing. And with coils over top ones its hard to put anything in them holes.

Anyhow i rewicked like i said, air draw is not great but i can taste it a bit better than before but still not great. Im on 16w at about 4.1v dual coil 1.0ohm

OvG4FKo.jpg
Oo4jK2J.jpg

Short wicks as seems a lot better than long ones going to bottom of the wells after i saw someone do it and said it wicks better that way as in draw in more juice as if they were long and you fill the wells all it does is fatten the cotton and blocks the wells up with cotton instead of having lots of lovely juice for the cotton to wick up as u draw.
 
I grabbed the Raspberry too, it's very similar to FA's, not sure which I prefer. Both very nice!

Rhubarb 'n' Custard:
1.5% INW Rhubarb
1.5% FA Fresh Cream
1.5% TFA Vanillin (I'd use an FA vanilla, this was just all I had)
4% CAP Vanilla Custard V2

I'm sure that can be improved on a lot, but that was my first attempt and I liked it enough to make a 250ml that I'm still working my way through :p My mate also liked it enough to want to use my rhubarb to make some. He used his V1 custard though, which was admittedly nicer, but not enough to warrant nasties IMO.

Cheers D. Looks very good indeed! I have all of those except the Rhubarb so I'll place an order.

I've got a ton of FA's various custards so I'll see what I can come up with. I'm thinking maybe Catalan Cream or Vanilla Tahity.

Just rewicked it, seems better but man i tell u somit. When i hadnt used it in awhile and took it all apart and soaked it in hot water for a day. When i finally got round to putting wick on and trying one of my new juices the air holes and air draw were great like super airy on largest holes. After awhile and a few rewicks but still same coils. Its airyness on largest hole is like pap and is like medium hole. I have tried to roll up cotton or kitchen towel to see if its juice stuck in there but even tho it does suck a little up i cant really get in very far as its a elbow airhole system kinda thing. And with coils over top ones its hard to put anything in them holes.

Anyhow i rewicked like i said, air draw is not great but i can taste it a bit better than before but still not great. Im on 16w at about 4.1v dual coil 1.0ohm

Short wicks as seems a lot better than long ones going to bottom of the wells after i saw someone do it and said it wicks better that way as in draw in more juice as if they were long and you fill the wells all it does is fatten the cotton and blocks the wells up with cotton instead of having lots of lovely juice for the cotton to wick up as u draw.

Build looks fine mate. I'd probably bump up the wattage to around 20W though and see where you go from there, it might be that it needs a bit more power through it.
 
Could be that they've mixed it at 70PG/30VG? Might explain why it's really thin and the nasty throat hit due to the PG.

Have you thought about looking into mixing your own juice? After the initial cost of everything it works out stupid cheap to mix mate.

Thanks for the quick reply. This thread moves on quickly!

I was wondering if they had mixed up the base ratios when making up the batch of juice. Kinda miffed I bought so much thinking I was getting a good deal. Would be interested to hear if anyone has had issues with Rejuiced previously?

I had a quick look into mixing my own. It seems like the way forward. As soon as payday comes i'll put in an order :) This vaping hobby is starting to cost me as as much as my PC hardware obsession!

I have a Crown v2 on it's way in the mail. Should hopefully be here tomorrow. Just after I placed the order I found a few threads discussing quality of the first batch of v2 coils.. I contacted Vape Club who said they 'believe' they have the latest and updated version of the coils in stock. Are there any Crown v2 users here? How are you guys getting on with yours?
 
Thanks for the quick reply. This thread moves on quickly!

I was wondering if they had mixed up the base ratios when making up the batch of juice. Kinda miffed I bought so much thinking I was getting a good deal. Would be interested to hear if anyone has had issues with Rejuiced previously?

It could also be that they used AVG (Aqueous VG) which is VG and Water. Could explain why it's runny although the throat hit makes me think they got the ratio mixed up. I'd drop them an email mate, I'd have hoped they'd send you a replacement bottle out.

I had a quick look into mixing my own. It seems like the way forward. As soon as payday comes i'll put in an order :) This vaping hobby is starting to cost me as as much as my PC hardware obsession!

Good man! It's the best part of vaping for me in all honesty. Just coming up with loads of different recipes to try is super fun. Worst case scenario you make 10ml of absolutely naff juice and it's only cost you about 80p.

Gimme a shout if you need any help with what to get, I've posted some good guides in here before detailing exactly what you need :)
 
Wismec have announced the Reuleaux RX2/3 with replaceable back covers for either 2 or 3 cells. I like the idea but I got the RX200 for the battery life in the first place, I don't want less!

http://www.wismec.com/product/reuleaux-rx23/

Good price though at just under £30 - https://www.fasttech.com/products/0/10018663/5410703-authentic-wismec-reuleaux-rx2-3-150w-200w-tc-vw

__

Geekvape back at it again with the GBOX 150 - Dual 26650 mod!

Looks pretty small though! Bang two Basen Black 4500's in there and you've got some solid battery life.

http://www.geekvape.com/project/gbox-150/
 
Last edited:
Much appreciated Gee thanks for this man :)

If funds allow I should hopefully place the order this week. I'll be sure to give you a shout first.

No worries mate. This is my post from the old thread. Should be everything in there that you need to get started. Any questions just holla.
 
Wismec have announced the Reuleaux RX2/3 with replaceable back covers for either 2 or 3 cells. I like the idea but I got the RX200 for the battery life in the first place, I don't want less!

http://www.wismec.com/product/reuleaux-rx23/

Good price though at just under £30 - https://www.fasttech.com/products/0/10018663/5410703-authentic-wismec-reuleaux-rx2-3-150w-200w-tc-vw


Sounds like a great idea, but mark my words, it's going to lead to someone getting hurt. Unless you mark the batteries and rotate them well, or use seperate sets of 2 and 3 batteries, it's going to lead to uneven wear, and defeats the entire point of marrying them!
 
No worries mate. This is my post from the old thread. Should be everything in there that you need to get started. Any questions just holla.

Just having a look at some flavours in advance Gee. Capella have a huge choice while the others seem a bit limited.

When you mentioned 'nasty' ingredients in your other post, do a lot of the Capella flavours contain these nasties? Will they all be listed under the ingredients section?
 
Just having a look at some flavours in advance Gee. Capella have a huge choice while the others seem a bit limited.

When you mentioned 'nasty' ingredients in your other post, do a lot of the Capella flavours contain these nasties? Will they all be listed under the ingredients section?

If there's a Capella V2 flavour, that will contain ZERO nasties. Here's a list of most of the Capella flavours that contain none of these 'nasties'. Any you're unsure of man, gimme a shout. Hope this helps somewhat.
 
This is great, thanks again dude. Pretty much answers that question perfectly :)

I'll have a proper look tomorrow with aim to placing an order or two on Thursday. If the Capella order takes weeks to arrive I'll maybe grab a few from flavourart to try in the mean time.
 
This is great, thanks again dude. Pretty much answers that question perfectly :)

I'll have a proper look tomorrow with aim to placing an order or two on Thursday. If the Capella order takes weeks to arrive I'll maybe grab a few from flavourart to try in the mean time.

They won't take long to arrive mate, couple days if that.

Try http://vapable.com/ or http://thee-cigshop.co.uk/ - they're my go-to pretty much for concentrates.

If you want FlavourArt concentrates, use http://www.flavourart.co.uk/. They have a 6 for £17 offer.

Depending on what flavours you like vaping, I can recommend some quick and easy ones to start you off with, that require very little steeping time.
 
I've got an unexplained desire to buy an iJoy Limitless RDTA, should I do it?

You guys will be directly responsible for my expenditure today :p
 
I've got an unexplained desire to buy an iJoy Limitless RDTA, should I do it?
You guys will be directly responsible for my expenditure today :p

If you don't have the original, then yeah get the 25mm Limitless RTDA Plus... especially if you've never tried an RDTA before.
I got one the other day and it performs fantastically... possibly too much, IMO. Mine is a replacement for my lost Cleito, but it's like going from a precision rifle to an 81mm mortar!!
Definitely not a leisure-vaping tank... or even an indoor one.

Build quality is great, function is awesome. Everything adjusts eaily and securely, everything fits, accessories are everything you could want, building is ****-easy - Cut the wick level with the top of the glass for best results. Anything below about 2.5mm will not have a sufficiently thick wick to keep it from leaking, though...
Airflow on this is tremendous and flavour is better than all my Drippers.

Only two difficulties so far:
1/. The fill port is messy if you use pippette bottles and the glass tips can break easily.
2/. The amazing performance means I'm having to learn properly about coiling, as I try to find the right balance between resistance and wattage for both economy (of power and juice consumption) and for a still decent vaping experience.

But still, despite my newbie struggles I just look at the thing and feel I've gotten my money's worth.
 
Hello Guys,

Tried a friends battery on my Cleito today as mine was dead. Wow my battery sucks lol.

What battery would you recommend? I want to get the Cleito RTA at some point with some .3-.4 claptons on it. So want something semi decent.

Although I don't like the idea of charging 18650s and all that. So USB Charging is a must.

I was looking at the Cuboid Mini 80W is there anything better?

Also if anyone can link me the stuff to get for coil building on the Cleito RTA that would be grand.
 
I've had a Cool Fire IV Plus for a while - really like it and lasts me all day. It's paired with a Cleito too and seems to just work well.

The only thing I don't like is the battery drop off, it gets to about 1/4 displayed battery life, and then seems to die. Perhaps it's an issue with mine but it gets a bit annoying.
 
Lol exactly 14 days from 13th from when FT said it shipped and provided a photo.

The pico mini kit has arrived. :)

Finally something new to try.

OHWLFF0.jpg
j4w1KiM.jpg
VQAD1SG.jpg

I think its got the 0.3 coil in as it reads at 0.29ohm. I have my raspberry from rejuiced in the melo 3 mini but dunno what wattage to set. The juice is 70vg 30pg and 3mg nic. So what wattage should i set? I dont wana burn the juice but also dont wana under power it so i get no vapor or flav. Was gona try 30w like but dunno as never had a coil like this or a mod which went up to 75.

I primed the coil and the outside of the coil (holes) then filled it up. Dunno if i filled it properly as not really seen any air bubbles come from the bottom yet.


Edit - Tried 30w seems nice and cool and flav is nice just not chucking clouds tho like tia was in her review. Also im getting a tiny bit of spitback of hot splatters on my tongue after i hold the button for abour 2 sec. Not sure why as tiavapes said she didnt get any.
 
Last edited:
Power is a little low, I believe those coils say on the side of them "30-80W", so you should be able to use the full range of the Pico. The spitback is likely because you aren't using enough power to fully vapourize the juice :)
 
Back
Top Bottom