UD5 Overclocking

Tried those settings surge and the work fine without altering my bclk, set that to 180 and bam reboot cycle ffs :/

mem is: tr3x6g1600c8d
 
Robert said:
Tried those settings surge and the work fine without altering my bclk, set that to 180 and bam reboot cycle ffs :/

mem is: tr3x6g1600c8d
Click to expand...

Whats QPI/VTT Voltage set to? If its on AUTO it will probably default to 1.1 (?), unless you use XMP (which you aren't), You might need to up it to 1.25-1.3 ish. Mind you too high can be as bad as too low. Also CPU VCore-try 1.300 with LLC enabled
 
tru but it will boot @ 4ghz on 1.28v you only need to push it up to 1.33volts when you need to stress test to get stable.
qpi to 1.315-1.355
ioh core 1.220
ddr 1.660 (in bios)
 
Changed QPIVTT to 1.3 and IHO to 1.2 and it booted fine at 3.2 :)

Not sure if it's stable...will try clock of 180 now.

Thanks for your help with this guys.
 
Robert said:
Changed QPIVTT to 1.3 and IHO to 1.2 and it booted fine at 3.2 :)

Not sure if it's stable...will try clock of 180 now.

Thanks for your help with this guys.
Click to expand...

Your'e welcome. Sadly QPI/VTT is key and is very CPU/Board dependent so what works for one person will not work for someone else. Quickest way to test is 5 (or better 10) passes of LinX using 3072 MB memory setting
:)
 
Its a shame Easy Tune is a bit rubbish- tweaking QPI/VTT or VCore for stability in Windows is so much easier. As for example using EVGA's Eleet which is great- sadly my experince of that was limited since my EVGA board died after a few days use:mad: Still got a refund:)
 
Robert...when you get your system running stable please post here a FULL list of your settings matey? I have a similiar system (slightly different RAM CAS) but I'm sure this subject will crop up again and again. Many Thanks
 
surge said:
Its a shame Easy Tune is a bit rubbish- tweaking QPI/VTT or VCore for stability in Windows is so much easier. As for example using EVGA's Eleet which is great- sadly my experince of that was limited since my EVGA board died after a few days use:mad: Still got a refund:)
Click to expand...

Well I'm going for 3.8 now...will set my CPU VCORE to 1.275 and see how it does.

Yeah no trouble Essexraptor.
 
You must log in or register to reply here.
Back
Top Bottom