What "man jobs" have you done today?

There are different types of scarifier and strictly speaking, I used a rake not a scarifier. However to most people, raking and scarifying are interchangeable phrases. Rakes have lots of wire hook type things on springs:

1JxqAF1.jpg

...which rip through the moss and tear it out of the lawn. The grass is mainly left untouched because it is straight and has nothing for the hooks to cling on to, as well as the fact that grass is rooted whereas moss is not, so the moss comes out easier.

Scarifiers in the true sense, cut through the thatch with blades and go deeper into the soil to provide aeration benefits in addition to breaking up the thatch. Scarifiers still do a job on moss but it's generally accepted that wire tine rakes are perfectly adequate if your goal is moss removable rather than full-blown scarification.
 
Last edited:
A bit more progress on the living room, not that anyone can live it in just now..

How the previous occupants left it
IMG_0677.JPG


During
photo.JPG

Test fit of the van damme cable
photo%202.JPG


Doing away with the hideous trunking, running 5.1 surround sound cable, ethernet for data and hdmi with a hdmi cable for backup in the wall and a fused spur.

Plan for tomorrow is to do the other 3 channels for the remaining speaker cable and I may as well run some ethernet to where the sofa will be while the skirting is off. Waiting for more Van Damme cable, bought 20m thinking that would be enough but it turns out from the amp to the rear right speaker is 13m on it's own, oops. :D Sofa should be here in 3 weeks so I need the room finished and painted by then.
 
Patched the render for where my outside light has been chased in. Bloody pleased with my efforts actually, render is a right sod to match and I think I got this pretty spot on.

House01.jpg


Also attached a gate post to the wall with some Thunderbolts, countersunk them nicely with a flat wood bit. Got to use my SDS drill, combi drill and impact driver all on one job :D
 
Nice work on that render, I thought it was some sort of stain when I first glanced, will be invisible once painted up.

I think one of these lights will be my next job. Did you fit it yourself or get someone in to do it?
 
2nd day of putting in oak wood floors in living room and hallway. Would be fairly straight forward if it was all square but have lots of diagonals and fiddly bits so it's very time consuming! Worth doing it myself though as seems to be around £18-20per sqm to get it fitted!
 
Sanded and painted the porch post and god kennel doors (don't laugh - it's as big as a shed as it's an Edwardian dog kennel with a preservation order on it, suitable for Great Danes).

Then jet washed the driveway (ran out of time to re-sand it so will do that tomorrow).
 
Nice work on that render, I thought it was some sort of stain when I first glanced, will be invisible once painted up.

I think one of these lights will be my next job. Did you fit it yourself or get someone in to do it?

Cheers, I used my fingertips and a water sprayer to replicate the render effect. I fitted the lamp myself, it's powered by a fused RCD spur from the kitchen ring.
 
The render above looks very convincing. Might benefit from sanding down the lip at the very bottom where your stippling has continued but the original was less textured, but that's not hard. Good job.

Also - more love for the gate above...looks really good!
 
Built a new shed,
Nothing special just a standard 6x4 but the old one was falling down so decided to flatten it & replace with a nice new one.

The old shed after I attacked it with a hammer !




Ground prepared for new shed




New shed installed.




Just needs painting now.
 
Last edited:
Managed to remove all the upstairs carpets and moved my stuff out to the downstairs back room.

The toilet had one layer of carpet and 2 layers of tiles which are major pain to remove, need to try and remove the upstairs old floor tiles, seems to be stuck down with bitumen.

Hopefully the builders start to tomorrow
 
Last edited:
This morning, I made a stand for an antique sabre. All of the ones on Amazon were geared towards displaying Japanese weapons and that was the wrong look. Just need to get some nice dark stain and give it a varnish.

I really need to get more tools though, and a workbench!
 
Not today, but over the weekend:

My study / mancave / crud dumping ground went from :

jtlDVWU.jpg

Broke down the old, huge and heavy desk

Vdl1Tym.jpg

Cleared the wallspace

AEn8C3I.jpg

Battened the walls

ykaqdbr.jpg

New beech worktop as a desk

5ZXUlCc.jpg

Placed the kit to judge where the cable holes needed to go

NCWqsht.jpg

Took delivery of the essential component

0QE15tR.jpg

Unpacked

OurwfFb.jpg

In place with just a little cable management left

MPddcG9.jpg

QgDrsRB.jpg

Still need to sort out the touching up / painting where the shelves came down and sort out something on the walls to take the bare look off, but all in all well chuffed :)
 
Back
Top Bottom