OMG We have the highest RAC in the UK ?
And I just quit crunching
My resources wont have kicked in yet !
What do ya mean you quit crunching - explain
Milkyway@home - August update
- Thread starter derk
- Start date
My resources wont have kicked in yet !
What do ya mean you quit crunching - explain
Soldato
- Joined
- 27 Oct 2006
- Posts
- 7,765
- Location
- London
The loaner's over - I just clicked team quit - D'Oh
Besides I'm being kinder to the environment and my leccy bill now
Good luck halz - The team is looking solid !
Besides I'm being kinder to the environment and my leccy bill now
Good luck halz - The team is looking solid !
Soldato
- Joined
- 27 Oct 2006
- Posts
- 7,765
- Location
- London
Anyone (Cyclo) running 5800 or 5900 series cards on MW?
I Have a problem with WU's being invalid following validation, dont have this problem on my 4770 and i didnt think i had this with my 4850x2's.
HELP
Since I've recently acquired the title of ' back stabbing deserter ' - I can offer to help
Post us a link to the WU in question.
How many invalid wus are you getting ? Everyone gets a few - nothing to worry about - but if it's a high percentage then watchout !
Anyone (Cyclo) running 5800 or 5900 series cards on MW?
I Have a problem with WU's being invalid following validation, dont have this problem on my 4770 and i didnt think i had this with my 4850x2's.
HELP
My 5830 had a few of these a couple of days ago but they are all gone now from my task list on the MW server.
This is a link to one of the many(about 10-20% of completed)
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=186750076
Im running XP64 with the standard app, i detached and re-attached earlier and have tried ccc 10.4 10.5 and now 10.7.
Ive even backed off the processor just in case but this was never a problem before, may try a clean install of XP tomorrow if i have time.
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=186750076
Im running XP64 with the standard app, i detached and re-attached earlier and have tried ccc 10.4 10.5 and now 10.7.
Ive even backed off the processor just in case but this was never a problem before, may try a clean install of XP tomorrow if i have time.
Soldato
- Joined
- 27 Oct 2006
- Posts
- 7,765
- Location
- London
My boinc version 6.10.56
Client but yours should be fine : Running Milkyway@home ATI GPU application version 0.20b (Win64, CAL 1.4) by Gipsel
dll used : CAL Runtime: 1.4.696
Maybe try to roll back your boinc version and cal runtime as provide by the ATI drivers.
Might be worth taking a cheeky look at what cyclo is using
ps You're running 4x5850s at stock right ?
Client but yours should be fine : Running Milkyway@home ATI GPU application version 0.20b (Win64, CAL 1.4) by Gipsel
dll used : CAL Runtime: 1.4.696
Maybe try to roll back your boinc version and cal runtime as provide by the ATI drivers.
Might be worth taking a cheeky look at what cyclo is using
ps You're running 4x5850s at stock right ?
Soldato
- Joined
- 27 Oct 2006
- Posts
- 7,765
- Location
- London
Running two 5970's at stock, i want to get it up and stable before i fit the accelero coolers that arrived today
Ahhhh ic !
Interesting as the client assumes you have 4 5850s ... but it looks like you're not the only one.... read here
http://milkyway.cs.rpi.edu/milkyway//forum_thread.php?id=1891&nowrap=true#41756
Last edited:
Im here now with my small contribution
Will be permanent, well at least till either the gfx blows or I lose me job or I work out how to get that bloody 9800gt crunching seti
Im here now with my small contribution
Will be permanent
Glad to hear it it S'ah, I wouldnt exactly call your contribution small, you have the forth highest RAC in the team.
.......you must try to disguise your modesty better than that
HELP again!!!
Finally got a clean install of XP64 up and running rolled back to CAL 1.4.636 installed the dummy plugs extended the desktop. Boinc sees all 4 gpu's and crunches 4 tasks.
All good so far, also the forrest of invalids is gone BUT ive just noticed that two of the workunits are running on one gpu with gpu3 load at zero.
Any ideas, im running the stock app.
Finally got a clean install of XP64 up and running rolled back to CAL 1.4.636 installed the dummy plugs extended the desktop. Boinc sees all 4 gpu's and crunches 4 tasks.
All good so far, also the forrest of invalids is gone BUT ive just noticed that two of the workunits are running on one gpu with gpu3 load at zero.
Any ideas, im running the stock app.
Finally i think i have the 5970's running
I had to fit the crossfire bridge enable crossfirex and only have one dummy plug on the second card extending the desktop to that.
Before i removed one of the dummy plugs i had 6 WU's running all very strange.
The good thing is ive just overtaken Mr cyclo (parp) for RAC
My RAC graph is almost vertical and thats from only 3 gpu's
Good to see your RAC is going the same way Mr halz
Almost forgot this..........
I had to fit the crossfire bridge enable crossfirex and only have one dummy plug on the second card extending the desktop to that.
Before i removed one of the dummy plugs i had 6 WU's running all very strange.
The good thing is ive just overtaken Mr cyclo (parp) for RAC
My RAC graph is almost vertical and thats from only 3 gpu's
Good to see your RAC is going the same way Mr halz
Almost forgot this..........
Last edited:
[nag] [/nag]
Can't let this lovely tiffy pass by without posting it somewhere
[/nag]
Alright already
Can't let this lovely tiffy pass by without posting it somewhere
