asus

Hi guys, new to the forum and watercooling! Just built my first water cooled rig, pretty impressed with myself to be honest! Didn't think it would come out as clean as it did! Only made 1 mistake with PETG tubing too. So I installed everything and started to fill the Corsair XD5 pump/res...

I've obtained Asus B250 mining expert MoBo, which has 3x 24 pin ATX power connectors on board. For powering it I'll be using 3x Power CXT 2000 W PSU which on max. load would be pulling about 25 A, which would be on a limit of a 25 A breaker (230 V) if I were to use all 3 PSUs on a single phase...

So maybe this is not too relevant any more but my latest build is with a brand new discounted Ryzen 5 3600 and a ASUS Prime-Pro X370 board purchased on the used market. The ASUS board had mixed reviews but mainly due to lack of RGB headers and early BIOS issues with the Ryzen architecture that...

Hello, I recently purchased an Asus TUF DASH F15, NVIDIA RTX 3060, i7 11370, 8GB Ram and I wanted to add another ram bar to this laptop. However, is it worth it to go from 8GB to 16GB of ram and if what type of ram should I purchase as I am a complete beginner . Many thanks, WH

Hi guys, new here! I wanted to ask if someone knew anything new about the rtx 3070 version of this laptop, when will it release/where can I find it if it has been already released? Hope something comes up, I want one rotfl.

Hi there! So I'm Currently looking for a new 3090 card and i have been looking at the asus strix 3090 oc but the thing is I'm going to put a EK Waterblock on it and i see people saying i will void my warranty so i found the asus 3090 EKWB but i see it only has 2x8 pin connectors compared to the...

Hi guys!!! I'm new to the forum and the "world of overclocking", I have an ASUS ROG G752VS OC Edition which, in Extreme mode, has the multiplier at 39X, the processor is an i7-6820HK, I tried to push the overclock a little further but it goes into power throttling. Now I don't know if it...

Hi All, I currently have an MSI B550 Tomahawk, however it has some coil whine coming from the VRM's at low load which is very unusual. I have to RMA it but I could be without a board for over a month. Would you recommend I get another MSI or ASUS board in the meantime. I am considering...

Hello all, Bit of an issue if someone is able to offer some advice please. I've just finished a refresh / upgrade of my system, the new(ish) compotents are: Asus X99-E WS motherboard. GTX 1080 graphics cards (I actually have 3 of them, but for troubleshooting purposes I'm only going with 1...

I've had this problem since I replaced my old mobo with this new one. I would have to either disable/enable the Ethernet port, or reinstall the Ethernet drivers for it to recognize the connection. I tried reinstalling Windows 10 Pro, I've tried uninstalling and reinstalling the drivers, and I've...

Im using an old Lian Li server tower and am finding the build a bit more difficult than i ever remember builds being. 1st issue is my h100i not fitting so having to do some engineering to get that to fit. Now my graphics card (980ti) wont fit as the motherboard (ASUS ROG MAXIMUS XII APEX LGA...

Hi all hope you are well. I am looking to upgrade my laptop's ram. It currently has 4gb soldered non removable and 4gb removable (compartment). I checked the max memory my laptop can take via cmd which is 16gb. Because that soldered 4gb is non removable does that mean i can only upgrade to...

Hey, i guess this is the right place to put this question? Is it ok to have a argb splitter going to a 2nd argb splitter? or would i require a hub of somekind to have more than 3 argb devices(3 front fans = 3:1 splitter) plugged into my 1 argb header? I want a rear argb fan, my gpu support...

Can you use the onboard HDMI graphics port with the Ryzen 9 5900X and ASUS ROG STRIX X570-E. ? ? ? just thinking would be good to have a internal graphics backup in case I have to RMA graphics card in future. This is my Build spec so far: AMD Ryzen 9 5900X -...

Hey So yeah you guessed it - I'm building a white RGB PC *yawn* I'd like some advice please. I currently have a Galahad 240 on order but I can pick up the Asus AIO for roughly the same price after some discounts and ASUS' own ratemygear promo. There's a few reviews floating about for the...

hi seems a stupid question but please bear with me here. Received the 3080 yesterday replacing my 2080. All initially appeared okay but noticed that when idle it was flipping between just 210mhz and zero. Leaving the pc for a while I came back to see it struggling to run the Windows...

Hi guys So recently my computer died and I isolated the problem down to either the cpu or motherboard. My first question is, is there any possible way of testing which of these components is the one that is damaged? The cpu is a intel 5820k and the motherboard is an ASUS x99-s and I don’t have...

With the asus price increase imminent, will overclockers honour all original pre orders? My concern is that I have seen Gibbo posting that x amount of asus tuf 3080 oc arrived, x amount of asus tuf 3080 oc now ordered and shipping.. This would suggest to me that all original pre orders were not...

Hello All, I will keep this brief, I am looking to build a new Gaming/Streaming PC and would like to enlist the OcUK Hive Mind for any advice, support or potential issues with this build. Please see below for the proposed spec. * Lian Li Lancool II RGB Mesh Black * AMD Ryzen 9 5900x * ASUS...

Hi, I have Z10PE-D16 mother board with single E52683 v4 CPU and 4 Dimms 16GB each When I put the 2nd CPU in and move 2 dimms from cpu1 into 2 it doesnt boots up it get stuck on D8 and doesnt do anything. Also i put the new CPU into CPU 1 and it works but when putting two cpus it doesnt work...