overclock

I finished my new system and used full body custom loop 9900K @ with Delid and der8auer Intel 9th Gen. OC-Frame My System ; - 9900K @ / 1,250V / Delid / der8auer Intel 9th Gen. OC-Frame - Asus Rog Maximus Xi Formula Z390 - 32Gb Corsair Dominator 3200Mhz - Asus Rog Strix Gtx 1080Ti OC Edition -...

Hi i'm beginner at overclocking. I've overclocked my Xeon X5450 for 3.48 GHz Voltage 1.2375V with Asus ROG Commando mobo. I've underclocked RAMs 800 MHz to 772 MHz for stability Voltage 1.8V. Then i've tested the CPU stability with using Prime95 for 2 hours. I've done the test without errors...

Current Build: I am wanting to get a 1440p 75/144hz monitor to game on & am wondering whether my current build is up to it, would overclocking my CPU help me (never overclocked before) or what would you suggest I upgrade for me to be able to take advantage of 1440p gaming, if is worth it over...

I'm about to start building a new gaming PC (will only be used for gaming) and wanted to know which is the better CPU for gaming - the 8700k or the 9700k? At the moment the price between the two is pretty similar with around £20 difference so will buy whichever one I'm going to get better...

Hi guys I'm looking at getting this motherboard as I have already got the CPU. I've read places that you can overclock this non k chip but it depends on the board. Would this board allow me to do so? Thanks, Josh.

Hi All I have a front mounted H115i Plat with push setup with two exhaust fans. The case is an omega RGB. My idle temps are 31.4 C on the pump and the cpu sits at 39C. CPU is a 9900k overclocked to 5ghz. When playing games my pump temp goes up to about 41C after a while but the cpu heat...

Hi everyone, I'm completely new to overclocking and I tried to overclock my i5 4690K. I used aida64 for about an hour. My cpu cooler is the hyper 212 evo and my motherboard is the Asus Z97-P. I tried to overclock it to 4.4Ghz and at 1.282v. I was wondering if its stable? Should I run aida64...

I asked Overclockers but it appears they no longer have a copy of their helpful instructions, which many years ago now I got with a CPU+MB bundle. Since my CPU has mysteriously reset itself somewhat (I added a new graphics card and it did this !), and so far I haven't found my hard copy of said...

Hello everyone I have a question about overclocking my memory. I tried to boost it for about two days now and can not figure out how to get it to work. the items I am talking about: -G.Skill TridentZ DDR4 4600MHz C18-22-22-42 1.45v https://www.gskill.com/en/product/f4-4600c18d-16gtzr -ROG...

I've recently followed a online video to OC the 8600k to 5Ghz and was surprisingly easy to do. I then read a few threads on various places on other people doing this to find some people can't or are struggling. This made me wonder if I've done it right? Mine is currently at 1.31v core with AVX...

Hi, on Christmas day me and my girlfriend are building our first PC together! The parts that we've bought are: Ryzen 5 1600 ASUS ROG STRIX 1070 MSI Tomahawk B350 16gb Corsair Vengeance RGB PRO 3000Mhz Corsair TX650M I've been told that the motherboard isn't good enough though, someone said...

HI! I have an i7 3770 and an asrock z77 pro 4. I was wondering if enabling the "no-k oc" option by Asrock from the bios is exactly the same thing to manually changing from the bios the multipliers switching from "Cpu ratio: auto" to "Cpu ratio: per core" and upping them by 4. So from 39, 39...

How's it going guys I recently upgraded my Asus ROG Strix H370 F Gaming mobo to Z390 ROG Maximus XI Hero. I also upgraded my cooling to the ROG RYU 240 water cooling. I was able to get an overclock right away to 5ghz with no issues and my temp under load is 55 degrees Not a bad temp I think...

Hi I wanna know what VRM does the MSI B450-A PRO have and how does it compare to Mortar's VRM. Does it have doubled hi/lo fets as well? And how can I know what components does any motherboard have for that matter? Is there a website with a database about all the components found in a...

Hi All, Tried to make sure of the Ryzen RAM overclocking tool that was updated a couple of days ago however the specific RAM modules I have are not listed in the "type" drop down. I have, unfortunately, got Hynix M-Die chips on a Corsair 16GB pair. Any tips on what "type" i should be picking...

Hey there Folks so i have a question to ask basically I've been running a stock clocked R7 1700 for about a year now and its been running great although i'm after some more performance :) So the rest of my system is in the description i currently play at 2560x1080 and Average around 80-90 FPS...

so I have an i7-8700K paired with an Asus Z370-I itx motherboard and I'm trying to overclock the CPU and since it's an itx system, I only want to OC to 4.2/4.5GHz. My issue is that I just cannot get the CPU to stabilise and stay at a constant speed. Can someone help?

Long story short, I have my new machine up and running with a 1950X, 128GB G.SKILL kit, on a Zenith Extreme MB. I've slowly tried to get the memory somewhere close to it's rating speed (3600MHz) but I know running at full-beans is asking a bloody lot from 128GB. I've got my eyes on at least...

So this is my first ever cpu overclock, I have been following a guide but have a concern I'd like to address before I go any further. I have been raising the clock speed bit by bit using HWmonitor & cinebench to test, I haven't had any crashes yet, but I'm currently at 4.8ghz with 3.20v yet...

I think the CPU won’t push any more as it wouldn’t stop the Prime95 test when I pressed stop it sort of froze up, the GPU might go further? , I already have threads asking questions about over clocking them but that was on how to go about it, this is more of a general question and show off of...