overclock

So hey Folks my system is in the description for anyone wondering so i know my CPU has XFR so it boosts to 3.75ghz on certain cores under Heavy Load. Im Currently using just the stock Wraith Spire cooler which seems to be doing well and is very quite it hits around 55-60c under full Load. So...

Greetings! I own a Gigabyte AB350 Gaming 3 motherboard on which I finally tried to do a little bit of oc. As a first time overclocker I've found this one to be a little confusing and would like to ask for some help from the more enlightened. The only way to adjust the vcore from the bios is with...

Hi. I have sold on ebay my old gpu Radeon 6770 1gb from asus. After one week I have a refund request. Reason provided: I see fluorescent textures at intermittent time when playing games. I think it is damaged. How can I check if it wasn't his fault? Ask for some free software diagnostics...

Hi all, Recently got a new pc and have been playing with OCing it. I am struggling to find a sensible answer on what voltages my kit max out at. I understand that really the limit on voltage are the temps produced as a result of the voltage but equally there must be a maximum the components...

Hi all, Been playing with my new rig and I reckon that temps are the only thing stopping me hitting 4GHz + on my Ryzen 5 1600 My question is, for good performance to really push the cpu but keep noise Tova minimum should I go lower end water solution or higher end air. Suggestions if good...

Just bought this motherboard, and are planing to oc. But then I got this response to a post on reddit: "I do not recommend overclocking with that motherboard at all. The software and hardware for that board are not up to par for a CPU as power-hungry as an overclocked 8700K." Is the motherboard...

If anyone can help me with overclocking this CPU pls contact me! Sry for bad english! :D TY

Hey! I have OC problems with my Ryzen 5 1600 on Asus Prime X370-Pro for the last 4 bios versions (on the newest one, 3402, also). I set 3.8GHz, voltage on 1.38 and CPU LoadLine Calibration on Level 3. When i saved changes and left bios i runned OCCT. Voltages were jumping about 1.46V after only...

I was looking for a z370 motherboard that offered overclocking options and that was offering great value for money. This was just that. It also added RGB as a nice little sweetener. With its good amount of usbs, spdif socket, sli capabilities it is packed with top features for a reasonable...

I've tried overclocking my Ryzen 3 1200 to 3.7GHz, it all went good, ran AIDA64 for an hour, temps are well within limits (58C max), no issues at all. Tested 3.7GHz on auto voltage, 1.225v, 1.250v, 1.275v, 1.300v, 1.325v - they all stably work for me, however, when I try to restart the PC - it...

I'm experiencing micro-stuttering when overclocking my Ryzen 3, changed the PSU, bought an aftermarket cooler in case it's thermal throttling - nope, it's not my RAM either as my PC works fine when not overclocked, ran AIDA64 for an hour, memtest, disk checks - no issues/errors, any help is...

Who wins the silicon lottery? ;) In this thread we can get a normalized comparison of GPU quality between different 1080 Ti cards by posting here your max stable core clock @ constant 1000mV 60C. How to do it: 1) Apply defaults @ Afterburner and set -200MHz to Core Clock, hit Apply. 2) Press...

Hopefully someone can help a very desperate man out here. I have this setup that I built myself, i7 5930K, 32ddr4, 2x sdd, GTX1080ti Seahawk, MSI x99a mobo, antec 850 psu (which is 9yrs old). I fitted my new 1080ti as a replacement for my old 970 and instantly noted a much longer system...

Hey, Got a TR cpu and am running a bunch of processes that are single thread heavy but there many of them. I'm trying to put the most CPU heavy process onto cores that boost. Is there supposed to be a group of processors on the TR CPU that boost and others that do not? I've got Process Lasso...

I recently upgraded my Ram from 8GB of Samsung Green 1600Mhz to 16GB Adata XPG V2 2400mhz. I've been running my Samsung Green ram at 2200mhz default timings since 2012, even though they were capable of 2400mhz at the time I could never get it to boot and so I thought that was the limitation of...

So heres something thats got me stumped. I have an i7 7820x with ASUS Prime X299 Deluxe mobo and G.Skill 3200mhz 32gb ram. With testing i can get a stable overclock of [email protected]. However, as we know some cores are better than others. My core 0 is always 10-15 cooler than my other...

Quick intro: I haven't overclocked a CPU since the 3rd gen Intels, so I am rusty to say the least. I recently replaced my 7700K with a Ryzen 1700 for better rounded performance, and decided to overclock it properly while I was at it. So far I've managed to reach 4Ghz @ 1,375v stable (an hour of...

Hi all, Been a lurker for years and finally got round to splurging on a big rig. I'll include the specs below but perhaps useful to put the question i have up here as i am not sure if i have the right section. Essentially, i have an i7 7820x (please no 'but y not Ryzen' questions from the...

I'm looking at a winter desktop build to go in my living room. SFF is a must along with being reasonable quiet. I want to bring this in under 2K without a monitor, KB, mouse or OS. I WILL NOT USE MSI PRODUCTS. Preference for AORUS/Gigabyte. This is the best I can come up with but it is over...

Ryzen 7 1700 MSI Carbon Gaming Pro x370 Corsair DDR4 3200Mhz Hyper Evo 212 Cooler Trying to overclock my Ryzen 1700 & RAM but struggling to get anything stable with low temps The best I've done so far is 3.7Ghz at 1.28v (VOC +1.000), spikes to 1.30v on stress test, Idle temps around 35c - max...