£1850 Budget for Gaming Rig, Monitor snd Rift Bundle.

orbitalwalsh · 21 Jan 2018 at 22:29

Just install the first one .

leeince · 21 Jan 2018 at 22:41

Plec said:
You need to enter power plan - advanced settings - and select the AMD option.

Got it, it was on balanced, its now on the AMD Ryzen option.

leeince · 21 Jan 2018 at 22:41

orbitalwalsh said:
Just install the first one .

Cool, that's the one ive got

leeince · 21 Jan 2018 at 22:44

Battlefields got 5 hours to go! Sky broadband is pretty poor. I miss my 200mb Virgin connection.

I will try the game tomorrow and let you know how it goes.

Chat soon,

Plec · 21 Jan 2018 at 22:58

OK, bud, we'll look out for your posts tomorrow.

leeince · 22 Jan 2018 at 07:32

Morning Chaps,

I left the PC downloading over night but didn't change any settings!!! It must have gone to sleep!!! What are the best settings to use?

orbitalwalsh · 22 Jan 2018 at 07:43

leeince said:
Morning Chaps,

I left the PC downloading over night but didn't change any settings!!! It must have gone to sleep!!! What are the best settings to use?

Never - for pc hibernate

leeince · 22 Jan 2018 at 08:48

orbitalwalsh said:
Never - for pc hibernate

Lesson learnt

orbitalwalsh · 22 Jan 2018 at 20:03

Any luck this evening ?

leeince · 22 Jan 2018 at 21:17

orbitalwalsh said:
Any luck this evening ?

Hi Mate,

Been in meetings all day, didn't finish till 7pm and then an hour and a bit to get home :mad:

Ive quickly tried BF1 and everything works perfectly!!! I had it on 2560x1440p @ 75hz and all on Ultra and runs fine.

I'm not going to able do much more tonight but what should be my next step?

Chat soon,

Plec · 22 Jan 2018 at 22:41

leeince said:
I'm not going to able do much more tonight but what should be my next step?

Enjoy it for a few days - gaming/browsing/apps etc...

When you do start adding more software/adjusting settings do them incrementally - test them out before adding/adjusting others. That way if there was an underlying conflict you'll identify it immediately.

Odds are it was just a glitch - but as it's working OK, for the moment, i would take the time to enjoy it and build from there.

orbitalwalsh · 23 Jan 2018 at 05:35

Enjoy it ! Can okay around after a bit , but after this restart need to really enjoy the gameplay !

Got it for VR so get yourself some good games and go nuts .

Get the kids involved

did you get the RGB on the board changing ?

leeince · 24 Jan 2018 at 19:39

orbitalwalsh said:
Enjoy it ! Can okay around after a bit , but after this restart need to really enjoy the gameplay !

Got it for VR so get yourself some good games and go nuts .

Get the kids involved

did you get the RGB on the board changing ?

Hi Mate,

Been a busy few days so haven't had much time to jump on. I still haven't managed to sync the led strip on the motherboard, its not even selectable in fusion, odd! I can change the gpu no problem.

orbitalwalsh · 24 Jan 2018 at 19:47

leeince said:
Hi Mate,

Been a busy few days so haven't had much time to jump on. I still haven't managed to sync the led strip on the motherboard, its not even selectable in fusion, odd! I can change the gpu no problem.

In the the basic Fusion mention, when you select colour cycle or music or pulse, it changes the other lighting area but the side strip ? Or are you using the advanced option and selecting on each area and tell what lighting effect you want it to have ?

Not sure if forum rep @GIGA-Man has come across this issue before ?

leeince · 24 Jan 2018 at 20:02

orbitalwalsh said:
In the the basic Fusion mention, when you select colour cycle or music or pulse, it changes the other lighting area but the side strip ? Or are you using the advanced option and selecting on each area and tell what lighting effect you want it to have ?

Not sure if forum rep @GIGA-Man has come across this issue before ?

When I go into Fusion and select the mother board I have three possible areas I can change the colour on. I have selected them all and changed colour and mode on all of them but none of them do anything to the colour showing through the Perspex strip on the mother board? All is does is slowing change through each colour and never changes.

When I select other devices I can select the gpu (the others a greyed out) and control that without issue?

GIGA-Man · 25 Jan 2018 at 09:04

Okay I will have a look and see why that's not changing...

GIGA-Man · 25 Jan 2018 at 12:31

Is it this version of the RGB fusion software you are using?

http://download.gigabyte.eu/FileList/Utility/mb_utility_rgb-fusion_B18.0104.1.zip

leeince · 25 Jan 2018 at 18:02

GIGA-Man said:
Is it this version of the RGB fusion software you are using?

http://download.gigabyte.eu/FileList/Utility/mb_utility_rgb-fusion_B18.0104.1.zip

Thank you mate, it was offering me an update for the version I had but I uninstalled that and installed your one and all is now working,.

leeince · 25 Jan 2018 at 18:02

orbitalwalsh said:
In the the basic Fusion mention, when you select colour cycle or music or pulse, it changes the other lighting area but the side strip ? Or are you using the advanced option and selecting on each area and tell what lighting effect you want it to have ?

Not sure if forum rep @GIGA-Man has come across this issue before ?

All sorted mate.

orbitalwalsh · 25 Jan 2018 at 18:03

leeince said:
Thank you mate, it was offering me an update for the version I had but I uninstalled that and installed your one and all is now working,.

Glad to see it's sorted ! Power of a hardware rep . Bet @Plec could have linked that and still wouldn't of worked hehe

Now you can get a pic up of it in Uniform colour haha . Some reason Gigabyte has the colour change really really fast

Got mine on slowest setting