Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
If you look very closely at the rear of the connectors with a flashlight, you just just about be able to tell. I have a week 42 Vision and I can see that it has the newer style connectors. I would have taken pictures but I just couldn't get a good enough angle. I can see with the naked eye though.
Going off topic here but what has annoyed me is that the edge of the backplate has a gouge in it that I noticed as soon as I took it out of the anti static bag
Anyway, back on topic...
This is the best picture and explanations yetI have modified the pictures a bit and I have put a mark to indicate exactly where to look and what to look at in order to identify if you have the old connector, if you have the temporary fix on the old connector, or if you have been lucky and you have the totally new connector that greatly improves the pins and does not let them come out of the connector even if you push them.
This is the new connector that greatly improves the pins and does not let them come out:
This is how you can identify what connector you have:
As you can see that little block is getting out of the box
This is the temporary fix on the old connector just adding a heat shrink:
This is the old connector:
I hope you guys now can identify what connector you have more easy, also want to say that some cards with that little block on new connector can have some bent pins, but just try to straighten them, and you are ready to go smoothly, since now the pins are not going to come out of the box.
They will test it before send it so perfect : D The seller will manage the rma of the faulty card so everythin' good.
