AS SSD Benchmark benchmarks!

skid34 · 7 Jul 2010 at 21:38

Crucial RealSSD C300 64GB 2.5" SATA 6Gb/s

manishpatel80 · 10 Jul 2010 at 00:43

Here is my C300 64gb with the asus u3s6 card in sata 3

I had a problem with my drive when I cloned it from my previous ssd drive. AS SSD stated the alignment was good but my 4k writes were very low.

I reinstalled windows 7 and now its perfect.

manishpatel80 · 10 Jul 2010 at 03:03

Better result with Latest Marvel Drivers

Well I updated the sata 3 drivers to Marvel v1.0.0.1036 and the results are slightly better
I am very happy with this new SSD its much faster then my M225 120GB except for write speeds, but I use my C drive for reading more.

reygjabla · 11 Jul 2010 at 17:39

Your 4K read and write has gone down a bit on CDM and i've read somewhere that intel driver is much better in implementing Trim than Marvel.

John24 · 13 Jul 2010 at 01:16

Just a reminder that this thread is for posting AS SSD benchmarks. If you need help with something or want to post other benchmarks please start a new thread.

Thanks.

leoncc · 13 Jul 2010 at 18:42

To everyone running a single C300 64GB, how do you use msahci, I'm using iaStor and getting 267 mb/s read =(

Using a GA-X58A-UD5 Rev 1

eleven8605 · 14 Jul 2010 at 08:35

one RENICE X3 64GB SSD

One piece RENICE X3 series 64GB SSD

Zarf · 14 Jul 2010 at 15:03

Alignment issues had been bugging me for a while, so I HDDErased, recreated my X25-M array with a 16KB stripe, and put a nice fresh install of Win7 on (in a single partition to make backups/cloning easier in future)

Pretty pleased with the results.

Daaaveee · 20 Jul 2010 at 21:54

Intel X25-V 40GB SSD

matttrd · 22 Jul 2010 at 15:30

Happy with mine.

Here's my Corsair RealSSD C300 64GB on a Gigabyte GA-EX58-UD5 motherboard Win7x64 Using Sata II.

[/URL][/IMG]

Why is my image so small?
I must be doing something wrong.

reygjabla · 23 Jul 2010 at 09:58

Here's 2 x Vertex 2E 64GB in Raid O (Shortstroked)

chronic86 · 23 Jul 2010 at 11:44

i've just got a corsair reactor 120gb my benchmark scores look way lower then other peoples, i have trim on and achi mode not sure what the hells wrong or if there is anything wrong with the drive. i alkso did a fresh install of windows.

Mr Paul · 23 Jul 2010 at 14:22

Looks about right for a JMicron controller

leoncc · 23 Jul 2010 at 14:31

manishpatel80 said:
Well I updated the sata 3 drivers to Marvel v1.0.0.1036 and the results are slightly better
I am very happy with this new SSD its much faster then my M225 120GB except for write speeds, but I use my C drive for reading more.

How are you hitting 350 mb/s read with a single C300? I get around 260 mb/s.

lukext · 23 Jul 2010 at 14:41

Hes probably using Sata III and you are probably using SataII.

chronic86 · 23 Jul 2010 at 17:37

think i'm going to exchange my 120gb reactor for a OCZ drive if overclockers will allow it

Bane · 23 Jul 2010 at 19:29

chronic86 said:
think i'm going to exchange my 120gb reactor for a OCZ drive if overclockers will allow it

Does the drive give you any wow factor though, if didn't look at benchmark figures?

How fast does Windows boot up now? Although going by your system specs it would be far faster than my machine.

chronic86 · 24 Jul 2010 at 01:29

to be honest its 'ok' no wow factor as such... can any 1 remeber the name of that benchmark which records boot up time?

Sylver123 · 24 Jul 2010 at 07:05

Here is a benchmark of my Crucial RealSSD C300 256GB using the onboard Marvel 9123 SATA 3 6GB controller and default Windows 7 drivers.

I have seen people here with the same drive getting a little bit better score than mine.

PAULRYAN52 · 24 Jul 2010 at 16:51

hi here's mine, it's the ocz 120gb vertez 2 e, can anyone tell me why it says jraid, how can i change it to ahci, also the score seems low to me