• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

ASROCK X570 TAICHI - THE RYZEN 3000 MOTHERBOARD GIBBO & 8 PACK RECOMMENDS

beany_bot said:
Hello. Two questions.

My chipset fan is starting to really annoy me, it's making noises and is really bugging me. I have changed it from performance mode, to "silent". This has helped somewhat. Would Asrock send me a replacement fan if I contact them? Will running it on silent hurt performance of anything in a measurable way?

Also I am still using Bios 2.10 - Is there any real benefit to flashing to latest?

Thanks all.
Click to expand...

Newer BIOS specifically mentioned improvements to the chipset fan curve.. give it a go.
 
Last edited:
How important is the 1usmus power plan to a 3600 owner?

I currently have the latest 3.0 bios, windows fully updated, changed the bios settings he recommends and am currently using Ryzen high performance power plan.

The reason I ask is because I can't seem to get the 1usmus download file to work and cannot use an elevated command prompt either because windows 10 has decided to break something again!
 
Doobedoo said:
How important is the 1usmus power plan to a 3600 owner?

I currently have the latest 3.0 bios, windows fully updated, changed the bios settings he recommends and am currently using Ryzen high performance power plan.

The reason I ask is because I can't seem to get the 1usmus download file to work and cannot use an elevated command prompt either because windows 10 has decided to break something again!
Click to expand...
What on earth is 1usmus?
 
Minstadave said:
Panos when you run R20 single core does it load one core or jump around? I'm still trying to figure out the poor boosting and low R20 scores I get.

When I run R20 SC I get the load jumping across 4 cores:

Click to expand...

Heh, today updated to 3.0 bios and was playing with settings from just XMP (even IF defaulted to 800) all way to 1usmus and ram overclock.

At every stage was running CB20 single core to see how the CPU behaves as per your post.
Things are more weird than before :p
At many points the single core CB20 benchmark was split between 2 cores. Core 4 with 43% of the load and Core 5 with 57% of the load!!!!!!

That with AMD Balanced and 1usmus.

With Community Power Plan v3 the load is always 98-100% and even when bouncing between cores it doesn't split the load.

LOL.
 
beany_bot said:
hmmm seems a bit niche/technical for me. Does it make a HUGE difference?
Click to expand...
Can do.

Basically you care about using xmp and tweaking tfaw and trfc. Those make the biggest and noticable difference.

You can look to tighten primaries too. But the two I called out really matter and are typically very loose by default.
 
lnoton said:
Can do.

Basically you care about using xmp and tweaking tfaw and trfc. Those make the biggest and noticable difference.

You can look to tighten primaries too. But the two I called out really matter and are typically very loose by default.
Click to expand...

Agree. With 3.0 bios update today, found the opportunity to tinker with the system today, tightening up few loose ram settings. Can take now 3800 14-14-14-14-28 with the ram voltage at 1.38 not 1.404 like before. (tFaw 16, tRFC 285)

Also played with 3866 16-16-16-16-32 but need to tweak the settings bit more. My 3900X can take 1933 IF
 
What is an acceptable chipset temp for everyone?
Im getting 71 degrees after about 20mins of running heaven with the chipset fan on "silent" (which is the only level I can tolerate...)
 
beany_bot said:
What is an acceptable chipset temp for everyone?
Im getting 71 degrees after about 20mins of running heaven with the chipset fan on "silent" (which is the only level I can tolerate...)
Click to expand...

About the same here, putting it on performance doesn't really help any way. You'll be fine under 100C I would imagine.
 
THis stupid board!! My gpu is covering the USB type c conector plug .. Anybody know were i can get a 90 degree plug so i can use the front pannel type c on my case?
 
Last edited:
It's mad to think the board went through its full design and testing process from end to end and they obviously never plugged a GPU into it. I mean they obviously didn't because they would have seen that the GPU blocks the chipset fan and usb type C.

Having said that I contacted asrock for a new chipset fan and they are sending me one from holland. So that's good
 
Panos said:
Agree. With 3.0 bios update today, found the opportunity to tinker with the system today, tightening up few loose ram settings. Can take now 3800 14-14-14-14-28 with the ram voltage at 1.38 not 1.404 like before. (tFaw 16, tRFC 285)

Also played with 3866 16-16-16-16-32 but need to tweak the settings bit more. My 3900X can take 1933 IF
Click to expand...

That is impressive @ 3800Mhz! What RAM you got?
 
You must log in or register to reply here.
Back
Top Bottom