Clocking Advice/Tips Needed

Just found a problem, well not a major one but C1E Support was on and the Asus software I installed was holding back the OC. When the temps hit 70C the clock went from 3.6 back to default 2.4 hence the good temps and I didnt notice this until I looked close at the above pic.

Anyway, I sorted out that problem but now the temps are hiting 74-74-60-60 and the system reboots with the above settings?

Not my day and I thought I was going for gold as well :(
 
Ok, increased the NB to 1.55v and the system froze with the following temps:

Idle: 44-43-40-39

Load: 74-74-70-70

Increased the NB to 1.70v (max) and the systems was as above but the system didn't freeze but rebooted.

Could it be a temp problem!

The side of the case is off.

Regards.
 
Ummm I'll have another look but removing and resetting the cooler I need to keep using paist and its going slowly, dont want to run out mid way.

Checking now or is there a way of checking visually?
 
PS,

As a side note, the CPU has been lapped but not the cooler, the first Freezer 7 cooler I did lap but the temps went up so I purchased a new one and thats what Im using now.

Could use the lapped one as a test so both surfaces are lapped.
 
Ok, other lapped cooler now on with a rice size tim and spread it using cling film.

I checked seating, temps are the same as follows:

77-74-69-69

Uhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
 
I've tried the system on its side and made no difference whats so ever, so as a test I went back to my original bios (0603) and that made no difference.

I then stuck everything back to default apart from the memory voltage and the temps are the same but not going so high.....

Idle: 42-42-38-38
Load: 60-60-55-55

Something aint right or the cooler aint doing its job.

Is there only one way this Freezer fits? I have the fan facing the memory extracting air to the back of the machine.

Regards guys and thanks for your help.
 
Running Everest Ultimate stress test and here are the details:

Temp Min Max Avg
Mothernoard 51 55 54.3
CPU 35 49 48.6
Core 1 44 60 58.8
Core 2 40 56 54.7
Core 3 37 54 51.4
Core 4 37 52 50.4

Cooling Fan
CPU 2848 2948 2901

Running at standard clock and ram voltage at 2.10v.

Still loks high to me.
 
Ummmm sorry guys I cant remember the settings now, back to 3200 until I get the temps sorted.

I purchased more wet & dry so soon Im going to have a go again at lapping the cpu and cooler just in case thats a problem area.

If I remember the settings, I will drop the multi back to 6 and report back asap.

Regards.
 
You must log in or register to reply here.
Back
Top Bottom