Core 9000 series

ToonarmY87 · 19 Oct 2018 at 15:26

beany_bot said:

Fantastic

ZXSpectrum · 19 Oct 2018 at 15:28

Been testing the i9-9900k this week. The temps are fine at 5-5.1Ghz All core with no AVX offset maxes out at about 86Degrees with a Fractal S36 with a decent fan curve to keep noise down. VRM Temps seem pretty good as well.

LambChop · 19 Oct 2018 at 15:28

According to guru3d, overclocking to 5.2ghz is around 80-85oc.
It's not great but its by no means a failure in any way ?

beany_bot · 19 Oct 2018 at 15:29

I would have been annoyed, but willing to delid a 8700k. But I aint delidding a soldered chip and lapping it. Forget that.

Drollic · 19 Oct 2018 at 15:29

signal11th said:
Yeah we know but let us have our fun... The picture with the child and house on funny was pretty good.

No doubt, it's actually a pretty poor showing for the cost. 8700ks look a good buy now even if ran at 4.8 lower voltage plus easier to delid if you want more. Someone in MM got one delidded that does 5.0 with a top tier mobo recently for £500. Good value almost.

CAT-THE-FIFTH · 19 Oct 2018 at 15:30

beany_bot said:
Discussion would have been nice but Intel brought the memes on themselves. It's a bum chip.

Its what we expected a Core i7 8700K with two more cores,and apparently even the STIM,has its own set of issues:

https://www.youtube.com/watch?v=r5Doo-zgyQs

beany_bot · 19 Oct 2018 at 15:31

CAT-THE-FIFTH said:
Its what we expected a Core i7 8700K with two more cores

I expected (as Intel were soldering) temps to be decent. They aren't

CAT-THE-FIFTH · 19 Oct 2018 at 15:31

ZXSpectrum said:
Been testing the i9-9900k this week. The temps are fine at 5-5.1Ghz All core with no AVX offset maxes out at about 86Degrees with a Fractal S36 with a decent fan curve to keep noise down. VRM Temps seem pretty good as well.

Its 86C with that cooler!!

CAT-THE-FIFTH · 19 Oct 2018 at 15:32

beany_bot said:
I expected (as Intel were soldering) temps to be decent. They aren't

Well look at the video I posted before - der8auer was surprised the Core i9 9900K ran that hot!!

signal11th · 19 Oct 2018 at 15:32

sod it cant figure out this forum code

ZXSpectrum · 19 Oct 2018 at 15:34

CAT-THE-FIFTH said:
Its 86C with that cooler!!

Yep but with 1.365v and a quiet fan curve.

NZXT30 · 19 Oct 2018 at 15:36

The memes are the only good thing about this CPU launch. Reminds me of fermi.

Brun · 19 Oct 2018 at 15:38

Haven't seen anything to make me want to cancel my pre-order from 'murica. Although when it might ship, I have no idea.

For 3D work - which needs the best of single and multi-threaded performance - nothing comes close. Am totally aware that the premium is steep, but coming from a 6700k it will be a very beneficial upgrade for me. Since my GPU's not watercooled these days I'll have 600mm of cooling for it, which should hopefully be enough to stop my house burning down.

CAT-THE-FIFTH · 19 Oct 2018 at 15:38

ZXSpectrum said:
Yep but with 1.365v and a quiet fan curve.

That cooler is nearly 8CM longer than my case.

Brun said:
Haven't seen anything to make me want to cancel my pre-order from 'murica. Although when it might ship, I have no idea.

For 3D work - which needs the best of single and multi-threaded performance - nothing comes close. Am totally aware that the premium is steep, but coming from a 6700k it will be a very beneficial upgrade for me. Since my GPU's not watercooled these days I'll have 600mm of cooling for it, which should hopefully be enough to stop my house burning down.

You got the wrong CPU then. This still gets demolished by the high core count Intel HEDT CPUs in anything very multi-threaded.

Also it still has less PCI-E lanes than the top end HEDT CPUs IIRC,so if you are using GPU assisted rendering over a load of cards,isn't that going to be an issue too??

~>Dg<~ · 19 Oct 2018 at 15:39

its just standard amd people who are used to these temps for the last 15 years from their amd gpus . why would they be worried about a bit of heat now ?

adequate cooling you can run at 5ghz gaming stay in the 75-80c. for 5ghz thats good. also be 30 fps on and amd chip. 9700 is actually looking really good now. just hopefully the gouging stops.

SiDeards73 · 19 Oct 2018 at 15:41

Brun said:
Haven't seen anything to make me want to cancel my pre-order from 'murica. Although when it might ship, I have no idea.

For 3D work - which needs the best of single and multi-threaded performance - nothing comes close. Am totally aware that the premium is steep, but coming from a 6700k it will be a very beneficial upgrade for me. Since my GPU's not watercooled these days I'll have 600mm of cooling for it, which should hopefully be enough to stop my house burning down.

You would have been better placed buying a 7900X or something to be honest.

beany_bot · 19 Oct 2018 at 15:44

~>Dg<~ said:
adequate cooling you can run at 5ghz gaming stay in the 75-80c. for 5ghz thats good.

80 degrees at stock speed with a huge AIO is good!?!?! :rolleyes:

orbitalwalsh · 19 Oct 2018 at 15:44

CAT-THE-FIFTH said:
Well look at the video I posted before - der8auer was surprised the Core i9 9900K ran that hot!!

Think gamersnexus de-lid one and its quite thick the solder used - unlike liquid metals self applied wit a thin layer

ZXSpectrum · 19 Oct 2018 at 15:45

CAT-THE-FIFTH said:
That cooler is nearly 8CM longer than my case.

LOL You need a bigger case..

To be fair they are for commercial workstation use so overkill cooling is needed.

Simon Belmont · 19 Oct 2018 at 15:46

ZXSpectrum said:
Been testing the i9-9900k this week. The temps are fine at 5-5.1Ghz All core with no AVX offset maxes out at about 86Degrees with a Fractal S36 with a decent fan curve to keep noise down. VRM Temps seem pretty good as well.

Some are running fine. most are not.

Competitor rules

Core 9000 series

Mobster