17 Apr 2017 at 21:21 #301 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Okay, definitely set to 42. CPU manual voltage, now setting to 1.23
17 Apr 2017 at 21:21 #302 Plec Plec Soldato Joined 19 Apr 2003 Posts 13,522 Go to the BIOS - and recheck the multiplier and then up core voltage to 1.23v
17 Apr 2017 at 21:21 #303 Plec Plec Soldato Joined 19 Apr 2003 Posts 13,522 Nathan Long said: Okay, definitely set to 42. CPU manual voltage, now setting to 1.23 Click to expand... Good man
Nathan Long said: Okay, definitely set to 42. CPU manual voltage, now setting to 1.23 Click to expand... Good man
17 Apr 2017 at 21:23 #304 Plec Plec Soldato Joined 19 Apr 2003 Posts 13,522 we may add another setting if it BSODs again - but we'll watch CPU-z while the blend runs as temps shouldn't change much.
we may add another setting if it BSODs again - but we'll watch CPU-z while the blend runs as temps shouldn't change much.
17 Apr 2017 at 21:28 #305 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Okay running blend
17 Apr 2017 at 21:28 #306 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Voltage has gone down to 1.240 when starting
17 Apr 2017 at 21:28 #307 Plec Plec Soldato Joined 19 Apr 2003 Posts 13,522 does the core voltage drop?
17 Apr 2017 at 21:30 #309 Plec Plec Soldato Joined 19 Apr 2003 Posts 13,522 we may have to introduce an LLC setting to counter it - looking at your manual...
17 Apr 2017 at 21:30 #311 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Shall I continue the test?
17 Apr 2017 at 21:30 #312 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Still 1.240, but did jump to 1.3 something quickly
17 Apr 2017 at 21:32 #313 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 1.232 then dropped to
17 Apr 2017 at 21:32 #314 Plec Plec Soldato Joined 19 Apr 2003 Posts 13,522 keep watching - keep an aye out for lowest value
17 Apr 2017 at 21:34 #315 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Jumping to 1.232 a lot now
17 Apr 2017 at 21:34 #316 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Now on that more than it's on 1.24
17 Apr 2017 at 21:37 #317 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Back to 1.240 generally
17 Apr 2017 at 21:38 #318 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Okay ten minutes done, Maximum temps at 81-84-85-84 although they finished at around 75-77-77-76 ish
17 Apr 2017 at 21:39 #319 Plec Plec Soldato Joined 19 Apr 2003 Posts 13,522 those temps were on blend?
17 Apr 2017 at 21:40 #320 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Yeah, although hang on, i put the voltage to 1.23 didn't I? So actually the voltages didn't change Oh wait no I didn't, set it to 1.3 I think?? Can't remember
Yeah, although hang on, i put the voltage to 1.23 didn't I? So actually the voltages didn't change Oh wait no I didn't, set it to 1.3 I think?? Can't remember
