Needed: Upgrade advice for a Useless individual!

NathanL · 17 Apr 2017 at 12:19

Okay done that

Plec · 17 Apr 2017 at 12:21

Set turbo Ratio to - all cores

Then the 'By all cores' - set to 43

NathanL · 17 Apr 2017 at 12:22

Okay done

Plec · 17 Apr 2017 at 12:22

Enable PLL overvoltage

Plec · 17 Apr 2017 at 12:23

Memeory Frequency - 1600MHz

NathanL · 17 Apr 2017 at 12:24

Plec · 17 Apr 2017 at 12:25

NathanL · 17 Apr 2017 at 12:25

Done that

Plec · 17 Apr 2017 at 12:26

Scroll down to CPU power management

Type out what you see - values etc

NathanL · 17 Apr 2017 at 12:28

Everything is set to auto? There aren't any values

Plec · 17 Apr 2017 at 12:30

Nothing written before the Auto box for CPU volatage or DRAM Voltage in white?

Plec · 17 Apr 2017 at 12:31

Nothing written before the Auto box for CPU volatage or DRAM Voltage in white?

Sorry DP :/

NathanL · 17 Apr 2017 at 12:32

Oh I see, I clicked the cpu power management and it went to another sub page.

The values you are talking about are on the previous page,
CPU voltage: 1.104v
DRAM voltage: 1.500v
VCCSA : 1.050V
PCH: 1.050v

NathanL · 17 Apr 2017 at 12:33

Sorry DP? What do you mean by this? Haha

Plec · 17 Apr 2017 at 12:37

Ok, ideally we want to run your memory at 1.5V (it's set at that now) - it's rated as needing 1.65V but they usually run at 1.5V.

So - we'll stick to auto (I know speedstep etc is enabled from you CPUz readings).

Press F10 save and exit - and watch your system blow...

Plec · 17 Apr 2017 at 12:38

Nathan Long said:
Sorry DP? What do you mean by this? Haha

Double post only - don't get excited

NathanL · 17 Apr 2017 at 12:38

Haha alright, am I going to regret pressing save and exit? Will my pc die

Plec · 17 Apr 2017 at 12:39

No danger of dying...

Nervous?

NathanL · 17 Apr 2017 at 12:40

Yes.

Plec · 17 Apr 2017 at 12:40

Do it.