That I can't help you with unfortunately.
Netgear D7000 VDSL modem/router
- Thread starter michty_me
- Start date
That I can't help you with unfortunately.
Here's some basic router stats after an a couple hours up. Will telnet tomorrow some time. Not entirely sure what i'm looking for!
There isn't really much info there apart from your down/up speeds along with SNR and line power. Best to get the stats from the telnet.
You'll maybe find that you have been put on interleaving or banded profiles due to an issue before and over the next few weeks the speeds will increase and latency will go down. My line is always improving still and has been running the best it has since going live a year ago.
Hopefully it is just a one off. Will try again tomorrow and see what happens.
It looks like you are on fastpath at the moment but getting a good few error seconds. Maybe not enough to move you to interleaved.
Looks like your SNR has dipped low to keep hold of your 64Mb sync also. If you were to reboot it, You would probably sync around 60Mb.
What is your home network like? Phone extensions, Home plugs?
Yes, ECI cab and around 400m if i follow the track of the masts and road.
Never had any problem with my line really with regards to drop outs, not that i know of anyway. I am concerned with why next door has 10 odd meg more than me download speed though.
Here's another. Should i expect this to resync some time this week?
Code:# xdslctl info --stats xdslctl: ADSL driver and PHY status Status: Showtime Last Retrain Reason: 0 Last initialization procedure status: 0 Max: Upstream rate = 15475 Kbps, Downstream rate = 61279 Kbps Bearer: 0, Upstream rate = 15393 Kbps, Downstream rate = 64063 Kbps Link Power State: L0 Mode: VDSL2 Annex B VDSL2 Profile: Profile 17a TPS-TC: PTM Mode(0x0) Trellis: U:ON /D:ON Line Status: No Defect Training Status: Showtime Down Up SNR (dB): 4.9 6.1 Attn(dB): 17.8 0.0 Pwr(dBm): 13.4 6.8 VDSL2 framing Bearer 0 MSGc: 18 14 B: 239 238 M: 1 1 T: 21 14 R: 0 16 S: 0.1192 0.4942 L: 16104 4128 D: 1 1 I: 240 255 N: 240 255 Counters Bearer 0 OHF: 124867285 72906 OHFErr: 14858 5 RS: 0 2538850 RSCorr: 0 111 RSUnCorr: 0 0 Bearer 0 HEC: 31006 0 OCD: 210 0 LCD: 210 0 Total Cells: 3230103661 0 Data Cells: 178760752 0 Drop Cells: 277 Bit Errors: 0 0 ES: 2712 5 SES: 16 0 UAS: 28 28 AS: 235386 Bearer 0 INP: 0.00 0.00 INPRein: 0.00 0.00 delay: 0 0 PER: 1.88 6.94 OR: 101.84 23.03 AgR: 64165.35 15415.73 Bitswap: 57582/64488 36/38 Total time = 2 days 17 hours 23 min 34 sec FEC: 0 111 CRC: 14858 5 ES: 2712 5 SES: 16 0 UAS: 28 28 LOS: 0 0 LOF: 0 0 LOM: 0 0 Retr: 0 Latest 15 minutes time = 8 min 34 sec FEC: 0 0 CRC: 3 0 ES: 2 0 SES: 0 0 UAS: 0 0 LOS: 0 0 LOF: 0 0 LOM: 0 0 Retr: 0 Previous 15 minutes time = 15 min 0 sec FEC: 0 0 CRC: 16 0 ES: 11 0 SES: 0 0 UAS: 0 0 LOS: 0 0 LOF: 0 0 LOM: 0 0 Retr: N/A Latest 1 day time = 17 hours 23 min 34 sec FEC: 0 17 CRC: 1594 1 ES: 538 1 SES: 2 0 UAS: 0 0 LOS: 0 0 LOF: 0 0 LOM: 0 0 Retr: 0 Previous 1 day time = 24 hours 0 sec FEC: 0 39 CRC: 6592 3 ES: 1093 3 SES: 8 0 UAS: 0 0 LOS: 0 0 LOF: 0 0 LOM: 0 0 Retr: 0 Since Link time = 2 days 17 hours 23 min 5 sec FEC: 0 111 CRC: 14858 5 ES: 2712 5 SES: 16 0 UAS: 0 0 LOS: 0 0 LOF: 0 0 LOM: 0 0 Retr: 0 NTR: mipsCntAtNtr=0 ncoCntAtNtr=0
I thought anything below 6dB SNR is poor
ot poor as such, That is just what DLM stays around. It can be more or less, However like I said if you resync it will go back to 6db and a lower sync rate.
Have you tried just having the modem plugged into the test socket for a while?
My line had a re-sync and gained 4Mb on the upstream and additional SNR but that was after several months uptime.
Is it recovering at all during the day or any time at night? Have you got a historical graph going of it?
Lantiq I believe.
I've just had a look. Looks like it has jumped from roughly 14 up to 18db and can see it has dropped again. I assume that was from connecting the HG612.
Have you tried a reflash of the firmware to see if that helps?
Let us know how you get on I' still eyeing up the new Billion when ever that will be released I think it has been delayed yet again
It would all depend if your line was being hindered by the Sky unit. If your line is already performing at optimum speed then there will be no benefit apart from greater wifi speed/distance I guess.
Pictures at last!! Back to a sensible case too...
http://www.billion.com/invitation/2014Computex/03-Billion-Gigabit-VoIP-Products.pdf
It doesn't look like that in that PDF. It is like this. Similar but a fair few external antennas.
https://www.ple.com.au/ViewItem.aspx?InventoryItemId=620798
I think i'll just leave it alone and wait till it loses sync...it's perfectly fine and does anything i throw at it!
EDIT - Is this WAN uptime anything to be worried about because i really don't want to think it is even though i'm leaning to yes...?
I've just been telnetting to see the SNR so though the Link uptime would change if there was drop outs. In my ignorance have I completely been ignoring it dropping out all the time with the WAN.
My uptime is similar to that. Nothing to be worried about.
Sorry I was looking at the system uptime. Apologies.
From what I've been reading it appears to be manufacturing delays and also driver hold ups for the new broadcom wireless chip.
From my understanding, It was going to be a 1900AC device but was changed last minute to go for the new 1733M Wave 2 (MU-MIMO) which they are perfecting prior to release.
I guess we shall see what appears in the next month or so.
I've read a bit on the pfSense stuff but isn't really an option for me unfortunately.
From my understanding, It was going to be a 1900AC device but was changed last minute to go for the new 1733M Wave 2 (MU-MIMO) which they are perfecting prior to release.
I guess we shall see what appears in the next month or so.
I've read a bit on the pfSense stuff but isn't really an option for me unfortunately.
Sounds like you do have the same issue then unfortunately.