OcUK Rolling Road 9: Photos + Graphs

What was wrong with Rich1988's 200sx? Especially given PowerStations optimistic rollers!

can has boost leak :p only got it on tuesday so havent had a chance to look it over properly but everyone I have asked on the SX forums says I have a boost leak that and I think my manifold is blowing slightly shouldnt be anything too difficult to sort out, next time I go Ill be getting stock power! :p
 
You must be over the moon with that figure, Andy :D

That 306 too, making good power with no intercooler it seems. Must be on a fairly aggressive map... smoke much? :D
 
You must be over the moon with that figure, Andy :D

That 306 too, making good power with no intercooler it seems. Must be on a fairly aggressive map... smoke much? :D

Making good power with an Intercooler ;)

The car was originally remapped without the intercooler, I got the map made up (120bhp map) and flashed the ecu myself. Then intercooled about 7 months later!

I realy need to get the clutch done and then map it up again, :)

Did anyone take any videos then?

Andy did, and Rover416 took a few on his camera.
 
Pug 106 is the star and in white! No flies on the original owner, he/she knew white was going to be big......one day and lard burning too.
 
Plates are showing on the charts.

What has that got to do with trust emails? ;)

I know, I didn't blank them last time either, do you really want me to (and you weren't even there you dirty dropout)?

Pug 106 in white is the star and in white! No flies on the original owner, he/she knew white was going to be big......one day and lard burning too.

It's nokinidea's :D
 
can has boost leak :p only got it on tuesday so havent had a chance to look it over properly but everyone I have asked on the SX forums says I have a boost leak that and I think my manifold is blowing slightly shouldnt be anything too difficult to sort out, next time I go Ill be getting stock power! :p

Unlikely that the manifold itself is blowing at the block (it has a multi layer steel gasket) but very possible to have blowing turbo gaskets.

I changed them on Kate's S14a, be warned to do the job properly you will also need to replace the fragile solid turbo water and oil pipes with braided ones because they are almost impossible to put back on without damaging them.

You need to remove this to get to it all :

congratulationsitsaturbo.jpg


Book time for the job is about 7 hours I think.

PS Sorry for not telling anyone we weren't coming, I completely forgot to post. Glad everyone had a good time.
 
You've blanked the plates in the pics - same thing tbh, i was just making you aware is all.

Just for you, I'll blank them then. :p

PS Sorry for not telling anyone we weren't coming, I completely forgot to post. Glad everyone had a good time.

I wouldn't worry about it, lots of people didn't inform via posts or other people, so I found out they weren't running by them not being there. :/ Specs aren't so bad really as it doesn't normally effect the running of the thing. :)

rich's exhaust sounds like it could be blowing somewhere, I didn't listen to it too much though due to running about getting everyone on the rollers etc.
 
Can't see the graphs :(

Looks like you all had a good one, gutted I missed it. Still, my car would have ripped the rollers out of the ground so it's a good thing I wasn't there ;)
 
Can't see the graphs :(

Looks like you all had a good one, gutted I missed it. Still, my car would have ripped the rollers out of the ground so it's a good thing I wasn't there ;)

I just reuploaded them because Muffin was being a big girl. They should all work now. :)

Would have been good to see yours ripping the rollers from the ground, and rover416's car breaking. :p
 
Looks like an ok day, sorry I couldnt make it, will be along to the August one though! Nice result though Moeks, just comparing your graph with mine, as couldnt believe you got 241 from a standard engine. Great Result, would have been interested to run mine yesterday with the much cooler temps! :D
 
Back
Top Bottom