Add me to the list.
Great OC but at 1.644v.?? that's highest voltage i've seen so far.
They're not so fragile after all.
What cooling did You use..??
Last edited:
OCUK Sandy Bridge, SB-E and Ivy Bridge 5GHZ Club
- Thread starter SimonMaltby
- Start date
Great OC but at 1.644v.?? that's highest voltage i've seen so far.
They're not so fragile after all.
What cooling did You use..??
I have added you but can you re-run using SuperPi 1.5 so you get decimal places on the time... I have had to add you to the bottom of the list as we have no idea where within the 7s range you fit.Hi can I join please?
Welcome to the forum. I'm a little unsure about your results and as you came to the forum and only made one post with no comments about your setup I will hold off adding you, especially as you would be top of the table.HiVizMan said:
Please post back and tell us a little more about your setup then I will gladly add your fantastic score to the top of the list
Associate
- Joined
- 8 Jan 2010
- Posts
- 358
I have updated my post with new screenshot using SuperPi 1.5 thanks
Welcome to the forum. I'm a little unsure about your results and as you came to the forum and only made one post with no comments about your setup I will hold off adding you, especially as you would be top of the table.
Please post back and tell us a little more about your setup then I will gladly add your fantastic score to the top of the list
Fair enough, I bench for BenchTec UK here is the HWBOT link for the submission.
Any thing else?
1Day just sent me an email too... sorry if i'm too cautious
Will add that superb score now for you
Soldato
damn I tried up to 1.35V and still no luck with prime 95 at 5GHz. Temps are not an issue...max is 76C
What's the lowest vcore required for 5GHz so far? Annoying as I have 4.8GHz stable with 1.296V
What's the lowest vcore required for 5GHz so far? Annoying as I have 4.8GHz stable with 1.296V
Soldato
Most need over 1.42v for Linx stability and I would imagine more (based on my experience) for Prime Blend stability. More details here:
http://www.xtremesystems.org/forums/showthread.php?t=239175
Associate
- Joined
- 29 May 2009
- Posts
- 6
my overclock was done totally with AI Suite, so i'm sure it'll go further, i'm just not too sure how to do it tbh. the time was 7.441 btw
Associate
- Joined
- 29 May 2009
- Posts
- 6
did it right this time, and broke my PB
Soldato
cool thanks. What vcore are you using for 4.8GHz on your 2600K?
Associate
- Joined
- 29 May 2009
- Posts
- 6
Oops, i did it again....I'm loving AI Suite!!
Soldato
nice work. Is there any way to get AI suite to auto-apply voltage profile upon entering windows?
Associate
- Joined
- 29 May 2009
- Posts
- 6
good question, short answer, not a bleedin clue. I do know you can save profiles within aisuite, if that help. since doing this oc, i have been reading many bad things about overstepping the mark when it comes to vcore. it seems my 1.488 is a little too suicidal
it's back at stock now, for a little rest, before i go for 5.4
it's back at stock now, for a little rest, before i go for 5.4
Associate
sonicgroove, is the wallpaper you've got a picture of the vineyards in Germany?
Associate
- Joined
- 29 May 2009
- Posts
- 6
again, good question, same answer!! it is part of a vineyards set i downloaded from the ms themes website. Imagine how long those buggers take to pick come harvest time!! I suppose we have to get our Liebfraumilch from somewhere tho!!
it is part of a vineyards set i downloaded from the ms themes website. Imagine how long those buggers take to pick come harvest time!! I suppose we have to get our Liebfraumilch from somewhere tho!!
Soldato
I was sure I updated mine, well anyways here it is, nabbing slot number 9
7.098 / MSI P67A GD55 / Intel Core i7 2600k @ 5304mhz / 4 x 2gb Geil Value @ 800Mhz 9-9-9-24 2T / CM Hyper 212 + Air
7.098 / MSI P67A GD55 / Intel Core i7 2600k @ 5304mhz / 4 x 2gb Geil Value @ 800Mhz 9-9-9-24 2T / CM Hyper 212 + Air
I guess I missed your update before.
Soldato
No worries dude, waiting for my B3 board then going for sub 7secs.