** Official Mayhems Development Log **
- Thread starter Mayhems
- Start date
Another rad maker not doing there job properly :/ use the mayhems blitz kit because not only does it strip away the crap out the system it also neutralises the acid and bring the PH balance back into alignment, vinegar flush doesn't do this 
.
.Let us know how you feel about the tubing, its going well out the door and there a lot of work gone into it
. The small bore tubing is a pain to get done to our standards and we've allready rejected 2 lots hopefully 3rd time lucky .New tubing photos
New - Non stain, None fade, Nanofluids so are highly UV active inc the new red, new pink, new orange ect ect
The coolants are all WIP and are being tested, I will soon send some coloured samples out to testers to see what they think. This will be a premium priced product though....
New - Non stain, None fade, Nanofluids so are highly UV active inc the new red, new pink, new orange ect ect
The coolants are all WIP and are being tested, I will soon send some coloured samples out to testers to see what they think. This will be a premium priced product though....
Got a case shipped with pastel ice white fluid , after a month it went into a salmon didngy White color. OcUK kindly shipped me some new fluid . I drained the loop ( diddnt re flush it however which was in hindsight the thing to do ) now 3 days after filling the loop the nasty color is back is this a PH thing ? What's actually happening I'll grab a few pics of befor and after soon
is this a PH thing ? What's actually happening I'll grab a few pics of befor and after soon
Soldato
- Joined
- 7 Mar 2013
- Posts
- 3,321
- Location
- Caistor
Got a case shipped with pastel ice white fluid , after a month it went into a salmon didngy White color. OcUK kindly shipped me some new fluid . I drained the loop ( diddnt re flush it however which was in hindsight the thing to do ) now 3 days after filling the loop the nasty color is back
what is the tube used?
You need to clean your rads. Adding more fluid wont fix it clean your rads propely and all will be fine. Seems like there is one crap rad maker in china pumping out lots of crap rads for sevral companies and this is the issue. When you cut costs somthing has to give....
Let us know how you feel about the tubing, its going well out the door and there a lot of work gone into it
It's good so far. Easier to work with compared to Primochill and Masterkleer.
I did clean them properly after I posted on this thread. it's way better now thanks.
and I bought the rads I've got now on the recommendation of a few people on here and other forums
If you turn the top ad around so the ports face the front and go from bottom rad, GPU, CPU top rad, res, pump -> Back to bottom rad, youll find you use less tubing and it will cool the same. Having a rad inbetween the gpu and cpu will make no difference in temps especially once your system reacheas equilibrium. Youll allso find its easier to bleed air out of the system and if any thing you may find a slight (abit only .05 to 1c) improvement due to better air removal.
Twis my first jump into water cooling , hence the pre build case . would have thought ocuk would have flushed it properly . Two new cards being wacked in this week so ill flush the rad and re fill the loop . We all have budgets , I guess this is the wrong place to be making tight decisions .
I presume it won't have much bearing on temps ? I havnt noticed any difference tbh but need it to run for a couple days more befor I drainWhen it comes to water cooling think of it as a long term investment. I still to this day use rads from over 18 years ago, i still used fitting from the same time period. You cannot do that with air cooling but you can with water cooling . There are cheap rubbish parts and there are high quality parts that are not so cheap. If you skimp out it only has costs you more in the long run.
. There are cheap rubbish parts and there are high quality parts that are not so cheap. If you skimp out it only has costs you more in the long run.Completely agree with the above statement.
Quick question: I want my pastel raspberry purple coolant to match the teleios purple sleeving so I've been adding a bit of red dye to it. Is this the right way to go about it?
Quick question: I want my pastel raspberry purple coolant to match the teleios purple sleeving so I've been adding a bit of red dye to it. Is this the right way to go about it?
It's all getting rebuilt this week or maybe next, so cheers, I'll look into it.
Soldato
- Joined
- 12 Feb 2009
- Posts
- 4,399
- Location
- London
Just ordered a pro blitz kit for loop I'm building but after watching your guide on YouTube I'm unsure if and when I should be testing the pH levels.
Also would it not be advisable to clean the rads and them not fit them for a few weeks as the copper would react with the air again?
Also would it not be advisable to clean the rads and them not fit them for a few weeks as the copper would react with the air again?
Soldato
- Joined
- 7 Mar 2013
- Posts
- 3,321
- Location
- Caistor
Hi there,
May I ask whether I can purchase the cleaning concentrate (Part 1 & 2) of your cleaning kits only?
I already owned your Pro purchase kit and so have the goggles and pH meter...
May I ask whether I can purchase the cleaning concentrate (Part 1 & 2) of your cleaning kits only?
I already owned your Pro purchase kit and so have the goggles and pH meter...
deFiniLoGy We cannot sell it with out google and gloves.
.:SAmSuNG:. You can clean and leave if you wish. The PH meter is just an extra for users its not impornat but shows if you cleaned your rads to a better level. Also you can accurately keep an eye on you coolant over time.
.:SAmSuNG:. You can clean and leave if you wish. The PH meter is just an extra for users its not impornat but shows if you cleaned your rads to a better level. Also you can accurately keep an eye on you coolant over time.