** Official Mayhems Development Log **

Just got to say I'm impressed with the service. Just placed an order and as it's abit late in the day for next day delivery. Steve rang me advising me and asked about shipping options.
 
Updated loop finally done!!

3bcdIotl.jpg


Used Pastel Orange and your Ultra Clear Soft tube to run in PSU chamber and cross chamber, and they are super easy to work with btw :)
 
@AndoriAvalonia Sorry i think halfords water is crap (just mho though) better off going to a small local car dealer and getting there water (car plan is nice), halfords use a cheap ass manufacturer who run there filters past there limits and dont give two hoots about it neither when you approach them .... You can just flush your system with Blitz part 2 if you wish, no need for Mayhems Blitz part one on our Havoc rads weve already done that here in our workshop.

Nice build deFiniLoGy with the Orange and love you tube bending skills.
 
I'm after some advice, I want to have a coolant that is as close to translucent as possible but that can still show a decent amount of colour.

In an ideal situation I'd like a red version of the UV clear blue, but I've never been able to find anything close to this. What I was planning on doing was just buying some X1 coolant and a red dye and mix it myself till I find a happy medium.

Is there a particular dye that will help me acheive this?
 
Digipact said:
I'm after some advice, I want to have a coolant that is as close to translucent as possible but that can still show a decent amount of colour.

In an ideal situation I'd like a red version of the UV clear blue, but I've never been able to find anything close to this. What I was planning on doing was just buying some X1 coolant and a red dye and mix it myself till I find a happy medium.

Is there a particular dye that will help me acheive this?
Click to expand...

X1 Clear or XT-1 Clear using none stain red dye.
 
Mayhems bespoke laboratory grade, hand blown and hardened glass tubing landed today. We are sending some out to Modders and people whom we believe will test it and give us feedback we need.

2up5zsi.jpg


Were looking at mass producing it in 12mm and 16mm OD (fits most of the main manufacturers of fittings)

1/4 Meter Straight
1/2 Meter Straight
1/4 Meter 90 degree bend
1/4 Meter 45 degree bend

This is a premium product and will be priced accordingly. When cutting glass use protective glasses. Its best to cut with a diamond dremmel disk and use Wet and Dry to clean the ends. Do not breath in the glass dust.
 
Last edited:
Mayhems said:
Mayhems bespoke laboratory grade, hand blown and hardened glass tubing landed today. We are sending some out to Modders and people whom we believe will test it and give us feedback we need.

2up5zsi.jpg


Were looking at mass producing it in 12mm and 16mm OD (fits most of the main manufacturers of fittings)

1/4 Meter Straight
1/2 Meter Straight
1/4 Meter 90 degree bend
1/4 Meter 45 degree bend

This is a premium product and will be priced accordingly. When cutting glass use protective glasses. Its best to cut with a diamond dremmel disk and use Wet and Dry to clean the ends. Do not breath in the glass dust.
Click to expand...

Looks nice, but I imagine a bit of a pig to install, but then again it should be fit and forget almost, so maybe worth it.

Mark
 
Mick I'm wanting to order two Darkside LP rads, however I'd really like to use a low profile fans also (but not essential) Is there any you would recommend for this or what standard fan would you recommend.

Thanks
 
I like the fans we have, i did like the Corsair sp120 how ever they are way to noisy imho. Im not a fan of slim lines i find them all to be pretty useless.
 
Hi Mayhems,

I'm planning my first watercooling loop soon and will be picking up a couple of your thin 240mm radiators from your website.

What cleaning method do you recommend? Is flushing with distilled water acceptable or do you recommend blitz even on brand new rads? Thanks
 
You must log in or register to reply here.
Back
Top Bottom