* Official SuperPI Leaderboard *

8 Pack · 13 Apr 2013 at 10:32

This is my best so far. Sorry I did not do the note pad thing I did not realise I had to. Its my result though see my HWbot account (Link in my sig) for the same result posted on that too. I bench for HWBot so used those rules as screen shot. MB is Gigabyte UP7 F30C Bios, Memory is GSKILL Trident X and here is a pic of my rig.

Nickolp1974 · 13 Apr 2013 at 10:41

NICE!! temps look a bit high though :rolleyes:

8 Pack · 13 Apr 2013 at 13:10

LOL!!!

KiiYzOo · 13 Apr 2013 at 13:16

8 Pack wins /thread

wazza300 · 13 Apr 2013 at 13:18

im still the top on air though

illuz · 13 Apr 2013 at 15:05

Crazy crazy clock 8 pack :O

Add them all when I get home!

Kaktus69 · 13 Apr 2013 at 15:30

Wow 8-Pack :eek:

Managed to improve a little bit with some Sammy Greens

Can't get close to the 5.3 clocks you guys are hitting.

illuz · 13 Apr 2013 at 15:50

Kaktus69 said:
Wow 8-Pack

Managed to improve a little bit with some Sammy Greens

Can't get close to the 5.3 clocks you guys are hitting.

On the bus home now, add it soon but nice score there! Try 2200+ with 9-11-11-21 mate, my sticks like those timings better.

illuz · 13 Apr 2013 at 16:42

Updated the main table. Kaktus, your last entry was 5.1GHz, push it up to that with your new memory and you'll hit 6m 32s I bet

.

horrorxpunk said:
In the 5.3Ghz club now with ram clocked at 2200 Mhz. Just tuning up so won't be long

I don't see no picture, hope your chips alright

wazza300 · 13 Apr 2013 at 17:03

you missed my score illuz

illuz · 13 Apr 2013 at 17:22

Woops, updated

horrorxpunk · 13 Apr 2013 at 19:59

illuz said:
Updated the main table. Kaktus, your last entry was 5.1GHz, push it up to that with your new memory and you'll hit 6m 32s I bet .

I don't see no picture, hope your chips alright

Actually chip and everything is fine it's just pulling up a decent score; it's not performing quite aswell I wonder if there is some throttling issue will have to check up on that and not got the ram frequency that I want yet before I submit. no point submitting lots of pointless failures. 5300 went through superpi no problem I have been contemplating the 5.4

wazza300 · 13 Apr 2013 at 20:07

its nice to see the up7 top of the table

illuz · 13 Apr 2013 at 20:10

horrorxpunk said:
Actually chip and everything is fine it's just pulling up a decent score; it's not performing quite aswell I wonder if there is some throttling issue will have to check up on that and not got the ram frequency that I want yet before I submit. no point submitting lots of pointless failures. 5300 went through superpi no problem I have been contemplating the 5.4

Just be careful with the volts!

wazza300 said:
its nice to see the up7 top of the table

Yeah, it's definitely my board of choice once I've water cooled everything.

horrorxpunk · 13 Apr 2013 at 20:37

volts is fine dude not to worry I have been running at 1.680volts stable on the chip but the ram does not want to play. I have benched the cpu fully and that's fine and stable but RAM is being a butt pain.

illuz · 13 Apr 2013 at 20:39

The higher your CPU clocks go, the harder it is to keep the high clocks on the ram. What you got it running like currently?

horrorxpunk · 14 Apr 2013 at 00:07

I'm able to boot with 5.3GHz + 2200Mhz 10-12-11-28 1T timings but windows just freezes and I can still move the mouse but it won't open up super pi. I know it's not a cpu stability issue or it would straight out crash, the ram is obviously coming up with lots of errors. So I am like at possibly increainsg VTTDR but this is not a setting I normally have to use; default being 0.75 so wondering wether to go with the 1.0 and then VCCIO I have set at 1.1 but increasing to 1.15 / 1.20 appears to make things less stable possibly. So I am also looking at changing the VRM frequency for DDR from 300Hz but again this is going to be a case of trial an error, I think I should be working backwards to increase stability and I haven't even gotten to changing the BClk yet so this is taking some real fine tuning it's a case of looking into the secondary timings and getting increasing stability from there seen as I am already at the maximum latency boundary, the primary timings must be fine because in my experience the PC won't boot at all if they are wrong in anyway.

I am a bit stuck and feel this needs a hell of a lot of work.

*** I can complete super pi no problems at 5.3Ghz with 1866Mhz 9-10-9-27 2T which is the Dominator GT's XMP. ***

illuz · 14 Apr 2013 at 00:11

When you're at your limit, that's it unfortunately

setter · 14 Apr 2013 at 01:50

Well done 8pack and wazza, nice scores guys. Though, i think there should be a separate category for 8pack.

@8pack, youll be pretty lonely on that table if illuz creates it.

wazza300 · 14 Apr 2013 at 02:00

yh I wanna be #1 again

goodluck though for anyone trying,im deffo not gonna push anymore!!

ohh and im glad you cracked that gflops issue

Competitor rules

*** Official SuperPI Leaderboard ***

* Official SuperPI Leaderboard *