You can guarantee it will
But you can pretty much also guarantee a 30c drop on a direct-to-die block with Liquid Ultra/Pro
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
*** Official SuperPI Leaderboard ***
- Thread starter illuz
- Start date
You can guarantee it will
But you can pretty much also guarantee a 30c drop on a direct-to-die block with Liquid Ultra/Pro
You can guarantee it will
But you can pretty much also guarantee a 30c drop on a direct-to-die block with Liquid Ultra/Pro
Delidded with EK-Supremecy & Liquid Pro, have the Naked Ivy on order & will definately do some before & after temp tests when it arrives.
Temps aren't the problem for me atm, getting the PC to boot at the required speed and complete Superpi is
I can;t compete with the new gen stuff, but here's my first go.
8m 49.319
http://valid.canardpc.com/2771117
I'm dead chuffed that I'm even on the same page as you guys! Especially when you consider I'm still running the RAM at stock speeds (well SPD settings), and all the voltages are on auto.
.... and I was browsing t'internet with flagrant disregard for my performance. At least I come top in one thing.... I've got the most Ram in that list
8m 49.319
http://valid.canardpc.com/2771117
I'm dead chuffed that I'm even on the same page as you guys! Especially when you consider I'm still running the RAM at stock speeds (well SPD settings), and all the voltages are on auto.
.... and I was browsing t'internet with flagrant disregard for my performance. At least I come top in one thing.... I've got the most Ram in that list
Last edited:
You can do it!!!
You have to use the force
I did try using the force this weekend but failed at:
a) Winning the Euro
b) Winning the Lottery
c) Completing Super pi sub 6m17s
My chip just doesn't want to play ball. The bios on P8Z7-V keeps getting its multiplier settings stuck which doesn't help.
Delidded with EK-Supremecy & Liquid Pro, have the Naked Ivy on order & will definately do some before & after temp tests when it arrives.
Temps aren't the problem for me atm, getting the PC to boot at the required speed and complete Superpi is
Yes, please do as I'm looking to move to direct-die watercooled as soon as funds permit.
I did try using the force this weekend but failed at:
a) Winning the Euro
b) Winning the Lottery
c) Completing Super pi sub 6m17s
My chip just doesn't want to play ball. The bios on P8Z7-V keeps getting its multiplier settings stuck which doesn't help.
I had that problem on my P8Z77-V Pro when I updated to the latest BIOS, I reverted back to 1501 (I think it's that) and the board stopped playing up.
Add the new entries now
Associate
- Joined
- 8 Sep 2009
- Posts
- 2,260
- Location
- Swindon
I can;t compete with the new gen stuff, but here's my first go.
8m 49.319
http://valid.canardpc.com/2771117
I'm dead chuffed that I'm even on the same page as you guys! Especially when you consider I'm still running the RAM at stock speeds (well SPD settings), and all the voltages are on auto.
.... and I was browsing t'internet with flagrant disregard for my performance. At least I come top in one thing.... I've got the most Ram in that list
You beat my i5 760 by 2 seconds
Think i may have to try again.
I can;t compete with the new gen stuff, but here's my first go.
8m 49.319
http://valid.canardpc.com/2771117
I'm dead chuffed that I'm even on the same page as you guys! Especially when you consider I'm still running the RAM at stock speeds (well SPD settings), and all the voltages are on auto.
.... and I was browsing t'internet with flagrant disregard for my performance. At least I come top in one thing.... I've got the most Ram in that list
those chips have good imc's you should try and run your ram at a higher speed although 24gb is a lot,good board aswell
Associate
- Joined
- 5 Jul 2012
- Posts
- 384
- Location
- Sheffield, UK
Probably best to disabled some DIMM's via the motherboard while overclocking and benching it will give you a wider overclocking range and stability.
just been playing with timings a little on my z68,knocked almost a second off simply by going from 9-10-10-22-1t to 9-10-10-21-1t
@illuz,setter should be above rooster in the table
ohh and kitfit1
@illuz,setter should be above rooster in the table
ohh and kitfit1
Last edited:
Associate
- Joined
- 5 Jul 2012
- Posts
- 384
- Location
- Sheffield, UK
Yeah a section for those of us that are on water would give the Air cooled guys a good chance to fight it out over their top spot
Yeah a section for those of us that are on water would give the Air cooled guys a good chance to fight it out over their top spot
I'm not adding a water section, no need when we kick the water cooling setups ass anyway
haha
Associate
- Joined
- 5 Jul 2012
- Posts
- 384
- Location
- Sheffield, UK
Just cut a side out of the case and use some ventilation tubing and dangle that out the window with a fan to suck in the cold wintery air
Just cut a side out of the case and use some ventilation tubing and dangle that out the window with a fan to suck in the cold wintery air
Ashamed to admit I've had that idea in my head a few times
You beat my i5 760 by 2 seconds
Think i may have to try again.
Let's get it on In all seriousness, I've never seriously played around with overclocking the RAM , so I think I shall have a go at that and the QPI before I start pushing the CPU harder. I was just trying to get the rig up and running as I'd lost patience during my build
I'm stunned to see how close the i7 760 was to the 980, especially bearing in mind that the 980 is on triple channel memory. That shows how well your kit really is going.
Unfortunately he has Corsair Vengeance LP dimms, they're terrible overclockers
Boooo! I'll still have a go though, but noted.