PROJECT: MAGNUS AQUA DOMUS!
- Thread starter pgi947
- Start date
And some more...
24pin:
2 x 6pin PCIE:
2 x 8 pin PCIE & an 8 pin EPS:
The quality on these is absolutely brilliant, the para cord gives a strong feel, yet still flexible with a soft fabric feel.
Alchemy extensions are very good, but they do feel quite cheap next to these
24pin:
2 x 6pin PCIE:
2 x 8 pin PCIE & an 8 pin EPS:
The quality on these is absolutely brilliant, the para cord gives a strong feel, yet still flexible with a soft fabric feel.
Alchemy extensions are very good, but they do feel quite cheap next to these
Man of Honour
Very nice
+1
Associate
Oh nice and unique. I like
Has your ram arrived yet? Getting any better results with it ?
Has your ram arrived yet? Getting any better results with it ?
Cheers everyone
It's due with me tomorrow, using some kingston 2400mhz cl11 stuff atm running at xmp with much lower sa/vtt voltages then the Samsung stuff required for 1866mhz!! Though it won't tune well at all. The g.skill kit should give me something around 2400 cl10.
Acrylic sheets are due today too so I'll get measuring and cutting tomorrow
It's due with me tomorrow, using some kingston 2400mhz cl11 stuff atm running at xmp with much lower sa/vtt voltages then the Samsung stuff required for 1866mhz!! Though it won't tune well at all. The g.skill kit should give me something around 2400 cl10.
Acrylic sheets are due today too so I'll get measuring and cutting tomorrow
Acrylic sheets are here!! I'll take them into work tomorrow to shave 200mm from one side and make some L-Brackets while I'm at it to support the other side.
I do need to find some drawings showing HPTX stand-off spacing so I can get those hole drilled too. Edit: SORTED
Going to be a looooong weekend I just know it.
I do need to find some drawings showing HPTX stand-off spacing so I can get those hole drilled too. Edit: SORTED
Going to be a looooong weekend I just know it.
Last edited:
Soldato
Cheers everyone
It's due with me tomorrow, using some kingston 2400mhz cl11 stuff atm running at xmp with much lower sa/vtt voltages then the Samsung stuff required for 1866mhz!! Though it won't tune well at all. The g.skill kit should give me something around 2400 cl10.
Acrylic sheets are due today too so I'll get measuring and cutting tomorrow
My Samsung is running at 1866mhz @ 1.3v. Is that good or do I just have lower expectations?
Thats good, we all but confirmed its an MSI compatibility issue with the Samsung dimms in another thread. Seems to be a bios issue on both Z77 and X79, Z77 is in someway cured via a beta bios, but no such betas exist on X79.
I was requiring stupid voltages to get any form of meaningful gain, even then I had to use slack timings, like 1760mhz CL11 requiring 1.42v on SA and VTT, 1.9v PLL & dram voltage of 1.65v which would still go belly up under memtest.
I was requiring stupid voltages to get any form of meaningful gain, even then I had to use slack timings, like 1760mhz CL11 requiring 1.42v on SA and VTT, 1.9v PLL & dram voltage of 1.65v which would still go belly up under memtest.
Soldato
- Joined
- 14 Feb 2011
- Posts
- 7,490
Got the Ripjaws now P?
Got the replacement board up and running now, so will do some do some testing over the weekend.
Got the replacement board up and running now, so will do some do some testing over the weekend.
Nope!!!!
Now due Monday, last time I order from that place, over 2 weeks to get something to me from Birmingham. To top it off they're sending it with ups, I ******* hate ups and their 'come collect your parcel at your local depot' that's a 3 hour round trip to get to
I could have ordered from the states and got it quicker.
What replacement did you get?
Now due Monday, last time I order from that place, over 2 weeks to get something to me from Birmingham. To top it off they're sending it with ups, I ******* hate ups and their 'come collect your parcel at your local depot' that's a 3 hour round trip to get to
I could have ordered from the states and got it quicker.
What replacement did you get?
Soldato
- Joined
- 14 Feb 2011
- Posts
- 7,490
Same again! Asus Rampage IV Extreme Intel X79 RMA replacement. Had a little mess with it today.
You wouldn't be the first 
I can't use the usual, dangle it over the sink and slash a hose as it's too heavy
I'll sort something out, I always end up leaving drain options out, but I think I have enough slack on the pump tubing to pull that out of the case and take a fitting off
I can't use the usual, dangle it over the sink and slash a hose as it's too heavy
I'll sort something out, I always end up leaving drain options out, but I think I have enough slack on the pump tubing to pull that out of the case and take a fitting off