thats for some graphic cards to give it extra power.
****Show Us The inside of your Case!****
- Thread starter Camoe
- Start date
Associate
- Joined
- 11 Feb 2010
- Posts
- 442
Just finished my new build here are some pics
Think I've done ok with the cable managment as It is an antec 300 and I haven't modded the case. Loving the 460
Think I've done ok with the cable managment as It is an antec 300 and I haven't modded the case. Loving the 460
Soldato
- Joined
- 17 Sep 2007
- Posts
- 11,117
- Location
- West Yorkshire / Market Bosworth
Just finished my new build here are some pics
Think I've done ok with the cable managment as It is an antec 300 and I haven't modded the case. Loving the 460
All you need to do now is buy a pack of cable ties and tie some of those fan/sata/power cables into the hdd bay out of sight.
All you need to do now is buy a pack of cable ties and tie some of those fan/sata/power cables into the hdd bay out of sight.
Or put the side on then everything is out of sight......
Associate
- Joined
- 11 Feb 2010
- Posts
- 442
All you need to do now is buy a pack of cable ties and tie some of those fan/sata/power cables into the hdd bay out of sight.
I used a pack of cable ties and sticky things
everything is straped tightly to the case there ar no cable in the way of any fans 
The cheapo "Razor" Case:
Nothing like most of the machines on here but its perfect for my design ,webwork and as my VM server.. maybe even a little CS:S if I have the time
Before: Getting pretty warm with a lot of dust build up in the heatsink blades. Lots of surface dust on the board and general dirt. PSU dust build up.
After: With a little thought and a complete strip down and clean. Running a few degrees cooler on idle too. Quite happy with that.
Nothing like most of the machines on here but its perfect for my design ,webwork and as my VM server.. maybe even a little CS:S if I have the time
Before: Getting pretty warm with a lot of dust build up in the heatsink blades. Lots of surface dust on the board and general dirt. PSU dust build up.
After: With a little thought and a complete strip down and clean. Running a few degrees cooler on idle too. Quite happy with that.
Everyone witht dual graphics cards do you not find it slight overkill.. I game at 1080p with a 4850 and can run pretty much everything at max detail..??
I cant imagine dual 5870,s etc are really needed for gaming. I used to run a pair of 5770,s and in all honesty i notice no difference with a single 4850. Although that was a different system.
I cant imagine dual 5870,s etc are really needed for gaming. I used to run a pair of 5770,s and in all honesty i notice no difference with a single 4850. Although that was a different system.