SSD Hard Drive Adapter For Coolermaster Cosmos

Naan_H said:
Dirtyjester - i can only admire your great work!! its fantastic , and a disgrace that coolermaster have not released anything like this themselves...

Would you be able to make me some too for my cosmos :) ? I know its been a while (since anybody posted on this thread), but i would be really grateful if you could. im looking to get some OCZ vertex 2Es this week :)
Click to expand...

Cheers matey and these little beauties will be heading your way tomorrow
pb280042.jpg

I'll drop you an email tomorrow just to confirm posting :)

Posted 1st class today :)
 
Last edited:
Hi DirtyJester, you mentioned you may be able to help me out.

I think I'm in a similar situation to PistolPete. I have the Antec P182 and it uses it's own screws with silicon washers to attach 3.5" drives into a caddy. The screws work just fine with the normal 3.5" drive screw holes. I need something to make my 2.5" SSD into a 3.5" drive! The ones OcUK sell apparently aren't a great fit, and I've tried another SSD mount and the holes on the sides are not far apart enough (i.e. it's not as long as a 3.5" drive).

Happy to provide any details you need and would readily give you some cash for a couple.

I'd really appreciate if you could help.
 
alexhull24 said:
Hi DirtyJester, you mentioned you may be able to help me out.

I think I'm in a similar situation to PistolPete. I have the Antec P182 and it uses it's own screws with silicon washers to attach 3.5" drives into a caddy. The screws work just fine with the normal 3.5" drive screw holes. I need something to make my 2.5" SSD into a 3.5" drive! The ones OcUK sell apparently aren't a great fit, and I've tried another SSD mount and the holes on the sides are not far apart enough (i.e. it's not as long as a 3.5" drive).

Happy to provide any details you need and would readily give you some cash for a couple.

I'd really appreciate if you could help.
Click to expand...

Hi Alex yes mate I should be able to help you out. If memory serves me right Pete's caddy had to have the two extreme holes to be able to attach it inside the cage ie. on a standard H/D you have 3 tapped/screwed holes each side and most caddies pick up on the 60mm pitch holes BUT you need to pick up on 102mm ?
 
alexhull24 said:
That's exactly it mate. The holes I need are at 102mm, the caddy only allows for screws in at that separation.
Click to expand...

Yeah even look at the pic of Petes caddies I thought it was the extreme holes. Well mate that shouldnt be a problem apart from Im back to work on day shift monday and midweek tends to be busier than nightshift (wont be till following week) that said if its only a couple I'd like to think I could get them made this week for you as to avoid the xmas post. Alex I will do my best mate and keep you updated either way :)
 
I received the mounts today, I've not had a chance to test them yet, but they look great. I'll update your trust once I've tested them. If you could trust me your payment details I'll get it sorted out for you ASAP.
 
I've tested the caddies with my SSD and they work perfectly as you can see:

P1060692s.jpg


The edge is perfectly flush with the connector so it fits like a dream. The pitch of the mounting holes is also spot on:

P1060698s.jpg


Thanks a lot for your time on these, it's much appreciated. You should see I've sent the payment through paypal and updated your trust. :)
 
Yes mate its all cleared and Ive updated your Trust as well. Cheers again :)

Just for the attention of any Mods / Admins. I am fully aware that buying and selling outside of the MM is NOT allowed so I would just like to clarify that the money changing hands here is solely cost and NO profit is made from these. OcUK do not sell (as no one actually makes them) any caddies for the Cosmos or in this case (no pun) the Antec 182. I hope this ok and if not I fully apologise.
 
DirtyJester said:
Yes mate its all cleared and Ive updated your Trust as well. Cheers again :)

Just for the attention of any Mods / Admins. I am fully aware that buying and selling outside of the MM is NOT allowed so I would just like to clarify that the money changing hands here is solely cost and NO profit is made from these. OcUK do not sell (as no one actually makes them) any caddies for the Cosmos or in this case (no pun) the Antec 182. I hope this ok and if not I fully apologise.
Click to expand...

That is correct. Regardless that you are not making any profit, this needs to be done in the MM.
 
You must log in or register to reply here.
Back
Top Bottom