-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
The Ada Lovelace RTX 4090 Owners Thread
- Thread starter Kaapstad
- Start date
Did you find a nice undervolt for it?
Soldato
None at all? That's extremely rare, maybe its low levels and fans are masking it?
What model 4090 is it?
Not tried that yet. I was just smoking testing it really.
None at all? That's extremely rare, maybe its low levels and fans are masking it?
What model 4090 is it?
I've only done a couple of benchmarks, I'll play some RDR2 tonight. But even with the case right next to me I couldn't hear anything.
Zotac Trinity.
Caporegime
- Joined
- 18 Oct 2002
- Posts
- 30,800
4k gives 120-125fps apparently, that's a stock MBA (same as a 4090).
Last edited:
Soldato
Red Dead 2 brings it up in every 40 series card, its crazy lol.
Soldato
My 4090FE arrived today
Fits nicely in my 011 Dynamic Mini using the Corsair Type 4 adapter, the cable is not even touching the glass
I am using my SF750 sfx PSU with a 13900k and the 4090 which is working perfectly
Fits nicely in my 011 Dynamic Mini using the Corsair Type 4 adapter, the cable is not even touching the glass
I am using my SF750 sfx PSU with a 13900k and the 4090 which is working perfectly
Last edited:
Soldato
My 4090FE arrived today
Fits nicely in my 011 Dynamic Mini using the Corsair Type 4 adapter, the cable is not even touching the glass
I am using my SF750 sfx PSU with a 13900k and the 4090 which is working perfectly
The mini is even smaller than mine (regular Dynamic size not Evo or XL), the Corsair one doesn't look like it's right-angled, how are you avoiding touching the glass with that card?
Soldato
Soldato
Looking at this I think that case must just be a little deeper when it comes to where the board and the GPU winds up, this also shows there is some room to the side of the case:
https://www.reddit.com/r/nvidia/comments/yg72wo/4090_fe_in_a_lian_li_o11_dynamic_mini/
Edge of my GPU to where the glass (would be) is 2CM only, so not enough space for the cable as you're not meant to bend them that near to the connector. They recommend not bending them before at least 3.5CM along.
https://www.reddit.com/r/nvidia/comments/yg72wo/4090_fe_in_a_lian_li_o11_dynamic_mini/
Edge of my GPU to where the glass (would be) is 2CM only, so not enough space for the cable as you're not meant to bend them that near to the connector. They recommend not bending them before at least 3.5CM along.
Last edited:
Yeah the room got pretty toasty!
Soldato
I agree, it looks like the dynamic mini is deeper
Soldato
Got the Coolermaster V3 vertical mount installed.
Not a huge gap to the edge but I think I can adjust it in a bit if I want, still it's not on the glass should the panel be installed either.
Not a huge gap to the edge but I think I can adjust it in a bit if I want, still it's not on the glass should the panel be installed either.
Associate
- Joined
- 22 Nov 2020
- Posts
- 1,510
Looks great. Could you put your mount as high up as it can go like I did? This would leave a space for fans at the bottom.Got the Coolermaster V3 vertical mount installed.
Not a huge gap to the edge but I think I can adjust it in a bit if I want, still it's not on the glass should the panel be installed either.
Soldato
Yes it does go higher up but I don't tend to bother with fans on the bottom. Got some to add to the side bit still.
Also a fair bit of weight to add if I elevate it higher up without any support beneath.
Also a fair bit of weight to add if I elevate it higher up without any support beneath.
Associate
- Joined
- 22 Nov 2020
- Posts
- 1,510
The mount can take it. It’s very rigid and strong.
Looks great. Could you put your mount as high up as it can go like I did? This would leave a space for fans at the bottom.
That really is a tidy looking system.
