• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

The GTX Titan X owners thread.

africanos23 said:
Nice.

1 CPU and 1 Titan X on a 240mm rad ?

Was thinking of getting a 360mm to SLI my Titan Xs but someone mentioned it won't be enough.
Click to expand...

No there is a 480 rad in the top :)

240 x 480 is probably a little overkill the fans are fixed at 60% around 1000rpm and the titan x has never gone about 48c after 5 hours of gaming.
 
danw872 said:
Titan X on water :)

dPKjVIC.jpg
Click to expand...

Now That's a nice looking rig
 
Five.Stars said:
As good as the black 1's look... I strongly suggest you return them and get the silver 1's. I have had a couple of the black 1's stick which obviously causes issues since the valve doesnt properly close allowing fluid to escape during disconnect. My "spare" set which I used as drain pipes are now not usable (the female part has pretty much locked completely and the valve will not close at all)

From what I have read, this is only a problem with the black 1's. Sadly I have 5 pairs of the blacks. The warranty wont even cover it as using anything other than Koolance's own fluid invalidates the warranty and I use Mayhems X1.
Click to expand...

That is shockingly bad for something that's supposed to be the gold standard. :(

But I googled:

http://www.overclock.net/t/1453853/...olance-qd3-quick-disconnects/10#post_21492627

Mine are the new S models, so fingers crossed... cba returning and don't want silver! :D Ta muchly for the warning tho bro. :)
 
Five.Stars said:
As good as the black 1's look... I strongly suggest you return them and get the silver 1's. I have had a couple of the black 1's stick which obviously causes issues since the valve doesnt properly close allowing fluid to escape during disconnect. My "spare" set which I used as drain pipes are now not usable (the female part has pretty much locked completely and the valve will not close at all)

From what I have read, this is only a problem with the black 1's. Sadly I have 5 pairs of the blacks. The warranty wont even cover it as using anything other than Koolance's own fluid invalidates the warranty and I use Mayhems X1.
Click to expand...

I doubt anyone is going to chemically test what fluid you've been using in them, If they leak get them replaced !
 
TROH updated.:)

The Roll of Honour.


Make EVGA SC, Kaapstad, Link
Make EVGA SC, Gregster, Link
Make Gigabyte, Gregster, Link
Make EVGA, magpie1966, Link
Make EVGA SC, Cosimo, Link
Make MSI, Orangey, Link
Make Gigabyte, BG1980, Link
Make Gigabyte, Boomstick777, Link
Make EVGA SC, andrewohare, Link
Make Gigabyte, Born_2_Kill_83, Link
Make EVGA, Silent_Scone, Link
Make Gigabyte, tipes, Link
Make EVGA SC, ITANI, Link
Make MSI, Five.Stars, Link
Make Gigabyte, Nocky24, Link
Make Gigabyte, mac40, Link
Make Gigabyte, africanos23, Link
Make Gigabyte, Ayahuasca, Link
Make EVGA SC, fantasticCG, Link
Make Gigabyte, darket, Link
Make Gigabyte, Scimitar1, Link
Make MSI, Drojman, Link
Make Gigabyte, SS-89, Link
Make MSI, ndaar, Link
Make MSI, VEGACORTEZ, Link
Make Asus, 8 Pack, Link
Make Asus, gerardfraser, Link
Make EVGA SC, Evil Shubunkin, Link
Make Gigabyte, wunkley, Link
Make Gigabyte, crinkleshoes, Link
Make MSI, VincentHanna, Link
Make Gigabyte, Amidar, Link
Make Gigabyte, Twisted Kid, Link
Make EVGA, romanlegion13th, Link
Make EVGA, danw872, Link
Make Gigabyte, davisdavid, Link
Make Palit, Watlinguk, Link
Make Palit, TTomax, Link
Make Gigabyte, seth1969, Link
Make Palit, straxusii, Link
Make Asus, Firefox35, Link
Make Gigabyte, GarryO, Link
Make NVidia Direct, Seyumi, Link
Make Gigabyte, Mal X, Link
Make Gigabyte, Budge4, Link
Make Palit, Quartz, Link

To get on the Roll of Honour all you have to do is post a pic with your user name on it of your TitanX.​
 
I'm getting screen tearing about half-way down when scrolling on my portrait Dell monitors. One is connected by DP, the other by DVI.
 
You must log in or register to reply here.
Back
Top Bottom