The Intel Quadcore Database

well it looks like I will have to go that way... but having to persaud the misses right now.. as I see it would have to be a pretty decent water setup to beat what I have now and that would be pricey :)

I think I will find the top end of this Air Setup first and then I will go from there
 
Past the 3800 mark :)

CPU - Q6600
Revison - G0
FPO# - L733A640
Clockspeed - 3825
Vcore - 1.360
Vid (core temp) - 1.2375
Thermal paste used - Arctic Cooling MX-2.
Motherboard - Gigabyte P35C-DS3R
Cooling - Custom Water




6to1tp1.jpg
 
Last edited:
Well past 3.9 on Air :)

CPU: Q6600
Revison: G0
FPO: Unknown
Clockspeed: 3.906 Ghz
Vcore (under load in windows): 1.496 (1.5375 BIOS)
Vid (core temp): 1.2625
Motherboard: Asus P5K - E
Cooling: Ultra Extreme 120
Thermal paste used: Arctic Ceramique
CPU Temp: 68/68/63/63 - very warm in the house today!



3906.jpg
 
Last edited:
well dont think much more is possible if i need more vcore increase, pretty certain that am at the limit of the heatsink if i can get more Mhz without a vcore increase then i guess i can get higher :)

am going to have a play around 2morrow with the HS see if I can drop those 2 hot cores a little then might have some room for a little more :)

Anyways will be getting my self a nice yorkfield when they come out will be really interesting to see what they can do on this sort of air-setup with so much less heat output
 
@ Pneumonic, would you please share your BIOS settings? my give me an indication of where I'm going wrong.

Post here or email in trust.

Thanx.

By the way, awesome overclock m8
 
Van Diemen said:
@ Pneumonic, would you please share your BIOS settings? my give me an indication of where I'm going wrong.

Post here or email in trust.

Thanx.

By the way, awesome overclock m8
Click to expand...

for that clock:

CPU Ratio:9
FSB: 434
FSB Strap To Northbridge: 333mhz
PCIE Frequency: 101
RAM: 5-5-5-23 @ 2T (tightened to 4-4-4-12 after the prime test and I ran a 2 hour blend test to make sure it was ok)
Vcore: 1.5375v
CPU Voltage Ref: Auto
CPU Voltage Damper: Enabled
CPU PPL Voltage: 1.5v
DRAM Voltage: 2.25v (but set as per manufactures instruction)
Northbridge: 1.55v
Southbridge: Auto
 
CPU: Q6600
Revison: G0
FPO# L738B229
Clockspeed:3.2 GHz (400*8)
Vcore (under load in windows): 1.232
Vid (core temp): 1.25
Motherboard: Abit IP35
Cooling: Arctic Cooling Freezer 7 Pro
Thermal paste used: Arctic Cooling Freezer 7 Pro
CPU Temp: 56,56,54,54

3.2GHz.jpg
 
^that's a great clock at that vcore.

Push it more though! :p g0 chips can take more heat!

BTW I've just been SMP folding for 24+ hours with my B3 quad at 3.6ghz....I'll try to push it a bit more and prime it overnight so I can enter it in before my g0 chip comes.

I'm going to take the top B3 clock :D
 
I would go for more but I am not too keen on the PWM temp so until I do something about that I'll probably stick with 3.2
 
With an open window and a little help from mother nature... anything is possible! :)

CPU: Q6600
Revison: G0
FPO: Unknown
Clockspeed: 4.023 Ghz
Vcore (under load in windows): 1.536
Vid (core temp): 1.2625
Motherboard: Asus P5K - E
Cooling: Ultra Extreme 120
Thermal paste used: Arctic Ceramique
CPU Temp: 54/54/49/49

CPUZ Validation ID: 285673


4023.jpg
 
You must log in or register to reply here.
Back
Top Bottom