The Intel Quadcore Database

CyZMyAssBaby · 15 Dec 2007 at 22:29

TiZoR said:
people, look out for the Q6600 L745A stepping cpus, Week45, these are overclocking monsters and ocuk has a large batch of these in OEM, not seen one over 1.25VID and most arround 1.200 dead, i tested about 20 so far and ALL good.

Heads up for the info thanks TiZoR m8

tommysdad · 16 Dec 2007 at 02:41

w3bbo said:
I'll still enter it into the database but any reference to it is pretty much useless as no one knows what to expect from the same chip.

Cheers mate, I`m priming now at 3735mhz on air, I`ll find max then post.I don`t think the board/my cooling has got much more left in it.

It`s addictive stuff this overclocking malarky

tommysdad

tommysdad · 17 Dec 2007 at 01:42

CPU Q6600
Revison GO
FPO#
Clockspeed 3780
Vcore 1.56
Motherboard GA P35C DS3R
Cooling TRU Extreme
Thermal paste used AS 5
CPU Temp 65 c
VID 1.2375

Found the boards max

. FPO lost in the dust, got the same VID as Bikerz , maybe from the same batch?

well chuffed for a 1st attempt

cheers

tommysdad

CyZMyAssBaby · 17 Dec 2007 at 01:45

Nice OC tommysdad, excellent temps, congrats

Pneumonic · 17 Dec 2007 at 17:28

CPU: Q6600
Revison: G0
FPO: Unknown
Clockspeed: 3.745 Ghz
Vcore (under load in windows): 1.424 (1.525 BIOS)
Vid (core temp): 1.2625
Motherboard: Asus P5K - E
Cooling: Ultra Extreme 120
Thermal paste used: Arctic Ceramique
CPU Temp: 63/63/57/57

CPU has more to give

am going to try to break 3.8 Ghz tomorrow

CyZMyAssBaby · 17 Dec 2007 at 23:24

Nice OC Pneumonic M8 congrats. From those temps and Vcore you got the room for the 3.8 mark

.

tsinc80697 · 17 Dec 2007 at 23:53

Low vcore there for that clock, wish mine would run at that voltage!

waso_dude · 17 Dec 2007 at 23:57

Tom what is yours running at now?

Scoobie Dave · 18 Dec 2007 at 07:31

w3bbo said:
Cracked 4gig yet Dave? Wanna update the database is all.

CPU - Q6600
Revison - G0
FPO# - L726A343
Clockspeed - 4005Mhz
Vcore - 1.64
Vid (core temp) - 1.2625
Thermal paste used - AS5
Motherboard - Asus Maximus Formula
Cooling - Custom Water

4Ghz at last!

Update the database! lol

Pneumonic · 18 Dec 2007 at 09:00

very nice

waso_dude · 18 Dec 2007 at 09:02

Niceone Dave, Got mine stable at 3.6, dam it i need this new watercooling set up. Getting 71/72 load at 1.4 :O

waso_dude · 18 Dec 2007 at 09:12

CPU - Q6600
Revison - G0
FPO# - 30B (don't have rest on me)
Clockspeed - 3608Mhz
Vcore - 1.416 Load 1.425 Bios
Vid (core temp) - 1.2500
Thermal paste used - OCz Silver
Motherboard - Asus P5K Delux WiFi
Cooling - Crap Custom Water

Temps are crap. I think with better temps vcore will be closer to 1.37 as i can run that 24/7 gaming ect stable.

Devious · 18 Dec 2007 at 18:41

Nice one Dave

stevenazari1 · 19 Dec 2007 at 12:25

is this gonna be a sticky? I think it should ^.^

Pneumonic · 19 Dec 2007 at 12:30

yeah should be a sticky!

Hopefuly tonight i will come home to a 8+ hours prime95 stable run @ 3.825ghz

stevenazari1 · 19 Dec 2007 at 13:48

it really needs some q6700 posters though. Im going to have to post mine when I get it for sure.

Troop · 19 Dec 2007 at 15:08

24 Hrs Prime Stable

CPU - Q6600
Revison - G0
FPO# - Lapped have the No. somewhere
Clockspeed - 3600
Vcore - 1.280
Vid (core temp) - 1.2375
Thermal paste used - MX2
Motherboard - Gigabyte P35C-DS3R
Cooling - Custom Water

waso_dude · 19 Dec 2007 at 15:11

:O uber low vcore there troop niceone mate

what block is that under a dtec or a EK?

Pneumonic · 19 Dec 2007 at 15:14

that is very nice vcore

Troop · 19 Dec 2007 at 15:17

D-Tek Fusion, no nozzles, on 10/8mm tubing, Lang DDC pro pump.