• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

The Opteron Skt 939 Overclocking thread !!!!

So far so good.
(Super Pi time not great - RAM at 200MHz with plenty going on in the background)






CABYE 0540FPBW - 3.00GHz (300x10) - 1.525v (BIOS - 1.488v CPU-Z).
DFI NF4 Ultra-D (704-2BT)
CPU MaxTCase - 63C
High flow top DDC/G4/Maze 4A/BIP III/Papst 1200RPM
Nasty 'Titan' thermal compound used (no point wasting the good stuff for speed binning)


Now just 4 more to test...
 
nightic said:
CABYE 0540FPBW - 3.00GHz (300x10) - 1.525v (BIOS - 1.488v CPU-Z).

Just FYI, CPU core will be @ 1.53 approx. under load. Ignore CPU-Z and any other program except a multimeter.

I measured mine (DFI Ultra D) after killing a nice chip because I thought the CPU-Z reported voltage was accurate, so went over 1.75v actual, maybe 1.8v I don't remember.
 
ditto snow patrol, feeling a bit gutted atm!

Just waiting for the cab2e results, but I have a feeling they will not be as good :( just my luck..
 
Jimbo Mahoney said:
Just FYI, CPU core will be @ 1.53 approx. under load. Ignore CPU-Z and any other program except a multimeter.

I measured mine (DFI Ultra D) after killing a nice chip because I thought the CPU-Z reported voltage was accurate, so went over 1.75v actual, maybe 1.8v I don't remember.

Yeah, no doubt about it Jimbo, just included the CPU-Z reading as it seems that (incorrect/false as it is) this is the figure many people quote when reporting their CPU voltage used.
 
Brocon said:
ditto snow patrol, feeling a bit gutted atm!

Just waiting for the cab2e results, but I have a feeling they will not be as good :( just my luck..

dun worry, I will take it to 3Ghz tmr when I get home ;)

CT_Nuts: CPU-Z not updated yet , and you still 0.01mhz short of 3Ghz :D :cool: :p
 
as long as they hit 3Ghz on air with out silly volts I will be happy :p not asking that much really, is it!

Well if it is poor it will have to be sold and I will get a 146..
 
Last edited:
Bossman said:
Still no worthy 144 clocks?

...

Someone at XS has been able to post at 333x9 on 1.35v. Not stable, but it could only mean it needs the volts taken up very slightly. :cool:
 
2nd CPU seems like it should scale about the same as the previous one.





CABYE 0540FPBW - 3.00GHz (300x10) - 1.45v (in BIOS - 1.408v in CPU-Z).
DFI NF4 Ultra-D (704-2BT)
CPU MaxTCase - 61C (2C lower than the 1st CPU)
High flow top DDC/G4/Maze 4A/BIP III/Papst 1200RPM
Nasty 'Titan' thermal compound used (no point wasting the good stuff for speed binning)


Edit - This one's actually doing a little better than the first, despite the lower MaxTCase.
Bumped voltage to 1.475 (in BIOS - 1.440 in CPU-Z) for 32mb Super Pi pass:



 
Last edited:
Kesnel said:
The majority of these Opterons have the cold bug so it may not be worth it. :(

Do they? whats the symptoms? the only one i've seen is yours. I'm holding off for a few days till I order one I've got a vapochill LS at home waiting for a good chip!.
 
Back
Top Bottom