http://www.vivdvapes.co.uk/cthulhu-rta-v2-p-386.html Claims to have stock, £36. Rather interested in this one myself, but hate "Juice control", I just don't get it...
Last edited:
***The Vapers Lounge*** 2.0
- Thread starter slick rick
- Start date
- Status
I got an email on Friday from vapordepot saying my pre order was delayed by around a week and stock is due with them some time this week, I'll dig up the email when I get home tonight. They threw in 15% off for the delay too
Associate
- Joined
- 21 Feb 2013
- Posts
- 344
In the description it says they're offering two glass tanks...1 clear and 1 frosted.
Is that right? I'm pretty sure Cthulhu said the frosted tank was only for the prototype.
Deffo want one but I'll hold off till its in stock someplace.
Is that right? I'm pretty sure Cthulhu said the frosted tank was only for the prototype.
Deffo want one but I'll hold off till its in stock someplace.
Yes i use 1 , for big coils that need massive airflow it is excellent.
Post holes are huge , so the pair of Clapton's i have in it are easily catered for.
24 gauge inner , wrapped with .25 around a 3,o mm drill bit.
Ohm's out about .35 & even @ 150 watts the vape is still relatively cool with airflow @ max settings.
It does have a few quirks but i really like building , using it.
Associate
- Joined
- 18 Oct 2002
- Posts
- 1,417
Quick question about building. When screwing down the coil into the post hole, does the wire need to be under the screw at its base, or can it be touching the inner part of the screw to the left or right?
Associate
- Joined
- 21 Feb 2013
- Posts
- 344
It's better to be under the screw directly otherwise it tends to loosen especially when repositioning or centring your coil.
Also depending on what chip you run (mines a Dna40) you'll notice the resistance consistently changing when the coil is not secure inside the post hole during firing.
It's not the end of the world when it isn't, but a much more consistent vape when it is. Be sure to retighten the screw once your happy with the build.
Also depending on what chip you run (mines a Dna40) you'll notice the resistance consistently changing when the coil is not secure inside the post hole during firing.
It's not the end of the world when it isn't, but a much more consistent vape when it is. Be sure to retighten the screw once your happy with the build.
Last edited:
I got an email on Friday from vapordepot saying my pre order was delayed by around a week and stock is due with them some time this week, I'll dig up the email when I get home tonight. They threw in 15% off for the delay too
Here we go:
Followed by:
Good Morning All!
Following on from m y email yesterday, we've had an official update from Cthulhumod this morning:
We are very sorry to tell you that we are not able to ship your order as shipping schedule, because the glass factory delay our glass tubes and cause our shipping postponed 3-4 days. Sincerely apologize again for the inconvenience and we will let you know once your order is ready to ship.
Further to that, we've also received more info on what is included in each kit:
1 x Cthulhu RTA V2
1 x Spare Glass Tank
1 x Extra Drip Tip
2 x Spare O-Ring Sets(They will come in white, blue and red)
And finally, just to wet your appetite....
I'll provide a further update to everyone early next week.
Happy Vaping!
![A[L]C](/styles/overclockers/avatars/7.png){kind=avatar}
Personally i swap batteries out when they are about 3.5v / 3.6v(about 1/3 battery life left on my Snow Wolf or IPV4 s) so a lot of the extra life is below my normal use so will make little difference .
25r's & HE 4's are my regular batteries(from Torchy) , well respected batteries & seller , they are also cheaper than 30q's.
If you are using them below 15 amps then they may be worth the extra(looked at a few reviews).
IMHO of course.
And i've just this second gotten this update:
Please note the discount code only applies to an account with the V2 on order
Ordered the Kangertech Subox mini https://www.fasttech.com/product/2385500 just need to order the Nitecore D2 charger and a couple of batteries tomorrow. Hopefully delivery times won't be too long!
Batteries take forever... do yourself a flavor and order from within the UK or at least place them on a separate order.
Torchy reckons the 30q's are good to 40a burst. Gone for 4 of them with a vp4 charger.
Bit of fun/something different in the UTA. Not bad, a decent vape but slow ramp up.
Its UD Kanthal A1 26AWG-32AWG Clapton Wire from UKECS, 3mm ID, think it was about 0.8 Ohms.
Apologies for the picture quality, bad lighting.
Also, this juice is my current favourite. Jam Toast: https://www.myvapery.com/e-juice-ej...-vapour-jam-toast-diy-concentrate-ecigarettes
Its UD Kanthal A1 26AWG-32AWG Clapton Wire from UKECS, 3mm ID, think it was about 0.8 Ohms.
Apologies for the picture quality, bad lighting.
Also, this juice is my current favourite. Jam Toast: https://www.myvapery.com/e-juice-ej...-vapour-jam-toast-diy-concentrate-ecigarettes
Last edited:
Cheers for this, was fiddling for ages with some ni200 and decided to try Ti in my Velocity Clone.
Wow!
Associate
- Joined
- 7 Oct 2008
- Posts
- 912
- Location
- Guernsey
Ordered myself an IPV D2, as well as some titanium wire to try out.
I have a Smok TCT which I've been using on and off and It's a great tank but the DNA40 isn't powerful enough to use it to it's full potential hopefully the IPV D2 will change that.
I have a Smok TCT which I've been using on and off and It's a great tank but the DNA40 isn't powerful enough to use it to it's full potential hopefully the IPV D2 will change that.
- Status