***The Vapers Lounge*** 2.0

Status
Not open for further replies.
slinxy said:
yes mate.. the whole setup cost me about £60 bucks so I can't complain... as stated there's no step down, shame as it would be a great noobs setup if it did.. but when your build your own coils and sub ohming, who needs step down.

it is odd thou, as lowing the power increases the ramp up time.



There is a french company that sells the Friday morning club stuff.. but your right; that amount of cash for a gizmo; I can't justify it neither.. lol

I have zero interest in a dna200 at the moment.. but that might change if I get a 3d printer at work ;)
Click to expand...

Who needs one at work

http://www.shapeways.com/product/65...ith-buttons?li=shop-results&optionId=57294604
 
UKDTweak said:
snip

The HCigar VT200 is a 1300 mAh lipo, so not sure about it for an all day mod, but the BOXER is the Dual 18650 version, so will be limited to just 130w... but i can swap out batteries as required during the day if ive no USB about me.. plus ive a load of 18650's, even bought 4 new Efest 2800mAh 35amp jobs from Torchy just for the BOXER.
Click to expand...

If the boxer is the 3d mod that I'm thinking of.. people are moaning about weak battery bay door. It comes off as soon as you pick it up. so you may need to change the magnets that it comes with. :)
 
slinxy said:
Yes mate, I've cloned you.. lol I got a carbon strip made for cars and stanley it out, helps with the grip. I'm impressed with the skin that came with it. I would rock it but with charging batteries externally and it being tight; I forecast issues with it.

The VT200 box mod has issues with it's 510 being clued on mate... I would confirm what version it is before getting it shipped.

I want a burning tab and a v3 kit too.. but I think it's being held up by legal reasons.
Click to expand...

Great looking D2 you have there slinxy.

The silicone case soon loosens up, I daren't take mine out the house (or any mod for that matter) without one :p
 
Cheers slinxy, i had heard that was a bit of an issue on the SX350 version, but supposedly they improved the door/magnets for the DNA version, but ill see soon enough i guess, ill stick a vape band around it if i need to... not many even have the DNA 18650 mod vet as they only started shipping this week from gingervapes who then stopped the shipping, at least on the lipo version due to questions about wiring... only found one owner so far and his was the lipo version.
 
Ok so seems there is another UKV member here, bought my Sig 100w... nice and Im glad your enjoying it.

Just sold my Tiafun GT II, only had it posted 5 minutes, should have priced it higher...
Now i just need to sell my ESquared DNA 40 and then my hammand 1550p DNA40...

Suddenly my box collection is looking small...
 
Battery question guys; I almost made my mind up on the Samsung 25r, but than found the Samsung 30q. Which is better? The 30q looks like it has the same amperage, but the mAh is higher. Surely this makes it a no brainer? Am I missing something?
 
UKDTweak said:
Ok so seems there is another UKV member here, bought my Sig 100w... nice and Im glad your enjoying it.

Just sold my Tiafun GT II, only had it posted 5 minutes, should have priced it higher...
Now i just need to sell my ESquared DNA 40 and then my hammand 1550p DNA40...

Suddenly my box collection is looking small...
Click to expand...

Yeah I say you add on ukv.. I was looking for a taifun gtII myself but with a short kit, but my "friend" sold his earlier today as well.
 
Funny enough, the guy that bought mine said he had just missed out on one earlier and was now going to try getting the shorty kit for the one he's bought off me.
 
UKDTweak said:
Funny enough, the guy that bought mine said he had just missed out on one earlier and was now going to try getting the shorty kit for the one he's bought off me.
Click to expand...

you on fb? you should join safer vapers, there's a lot a good people on there mixed in the idiots. if you do join, it's worth lurking for a bit to get used to the place, it's not as bad as the pit but it can be harsh. :)

mushtafa said:
Battery question guys; I almost made my mind up on the Samsung 25r, but than found the Samsung 30q. Which is better? The 30q looks like it has the same amperage, but the mAh is higher. Surely this makes it a no brainer? Am I missing something?
Click to expand...

The 30q is only 15amp mate... it's always worth checking more than one site for the ratings.
 
Last edited:
how many grams = 1ml? Do I need to precisely measure 1ml and see how many grams it is on my scale as that could be inaccurate? Google shows it as 1:1 but looking at ejuice calculators it is slightly more.
 
UKDTweak said:
Torchy did a graph of these against 25rs and hg2's... look great upto 20a... and apparently hold up well upto 30/40a.
http://ukvapers.org/Thread-Highest-capacity-18650-Battery?pid=1365701#pid1365701

If you want something in between, Torchy also sells the new Purple Efest 2800 mAh, 35amp cells, i just bought 4 for my DNA200..
Click to expand...

I found the UKVapers forum, made a post, most people recommended the 30Q over the 25R. Also saw that graph, so ordered the 30Q. Hopefully it was the right decision. (To be honest, I don't expect there's much in it really).
 
Twirlywoos said:
how many grams = 1ml? Do I need to precisely measure 1ml and see how many grams it is on my scale as that could be inaccurate? Google shows it as 1:1 but looking at ejuice calculators it is slightly more.
Click to expand...

Won't matter so long as you are using scales for everything. It will all be in the same and hence correct proportion
 
HazardO said:
Ok cheers. I was never going to run @ 50W anyway, I only bought it as it should last a couple of days between charges and I wanted to relegate my 30W Istick clone (Vapor storm V30) to backup.
Click to expand...

Exactly why I bought my i50w, for the battery life, it would do 2-3 days on a charge, only down side was it took forever to recharge!

But, its started to auto fire so its going in the bin, not risking that ****.

slinxy said:
Got my d2 finally...

I'm shocked myself with the size of this setup... I do have small hands.. lol
https://dl.dropboxusercontent.com/u/5836286/11949371_10154132849718098_4691156490427454806_n.jpg
Click to expand...

Nice, I ordered one this afternoon, not from FT, sod the 20 days pre order and then delivery on top, got it from Provapes should be here on Sat. :)
 
Twirlywoos said:
how many grams = 1ml? Do I need to precisely measure 1ml and see how many grams it is on my scale as that could be inaccurate? Google shows it as 1:1 but looking at ejuice calculators it is slightly more.
Click to expand...

PG and flavourings are 1:1 iirc but Nic and VG have slightly higher specific gravities so weigh a shade more than 1g/ml
 
Twirlywoos said:
how many grams = 1ml? Do I need to precisely measure 1ml and see how many grams it is on my scale as that could be inaccurate? Google shows it as 1:1 but looking at ejuice calculators it is slightly more.
Click to expand...

Frozennova said:
PG and flavourings are 1:1 iirc but Nic and VG have slightly higher specific gravities so weigh a shade more than 1g/ml
Click to expand...

This is what I use.

If you're really anal you can add the specific weights of each flavouring into your calculator, but for the sake of that I just stick to 1:1.

I use http://e-liquid-recipes.com/create for mixing, it calculates the weights of the VG, PG & Nic etc. for you.
 
Koopor mini turned up today. No batteries at work to test it though so will have to wait until I get home.

feQukeZ.jpg


First impressions are OK. Feels solid and looks great with no atty on it. I hate the top though. Why did they make it so the control surface curves at the top? It makes it looks stupid with an atty on it.

yne1wr0.jpg
 
Status
Not open for further replies.
Back
Top Bottom