***The Vapers Lounge*** 2.0

[UKDTweak]

The Sigelei 200w looks like the love child of the Snow Wolf and the SMY 60w TC.... that screen is just way too big.

 

[triggerthat]

Yeah, I was vaping it yesterday at work. I went through 4 tanks during the day and 2 batteries. That compares to my usual 2 tanks and 1 battery with the Aspire Triton which I usually take out and about with me.

I might stick to my Subtank in that case.

 

[slinxy]

Took advantage of vapourart day yesterday and ordered a spheriod v4..
I still use my v3 and it's a bloody good vape, some people are dubbing the v4 as the mini toot as it's a very similar deck design just smaller, really looking forward in getting it.

The only thing is most of my mods are design for 22mm attys so I'm keeping an eye out for small regulated mod, thinking of the sbody or the runt v3 when it comes out. It will just look odd on my mods even with a bograt.. 16mm attys only tend to look good on tube mods.

 

[UKDTweak]

My Uwell Crown just arrived a few minutes ago, pulled out the .5ohm coil head and wicked and fitted the RBA section, juiced u and now letting it sit a few minutes to settle... cant wait to rock this on the DNA200... got the 304 SS TCR downloaded from Steam Engine and uploaded to a 304 SS profile i created on the DNA..

I may need to go to my local B&M for more juice from what ive heard about this tank... ive only got about 200ml of juice lol

 

[blackice8r]

so...my eGo One mini is utter ** Swear words must be fully starred ** , I'm going to return it (with the 0.5 and 1ohm: it crackles, hot juice spits out via the mouth piece, also juice comes out via the air holes)

I will order something someone suggested :
iStick TC40W
For the tank I'm torn in between Aspire Nautilus Mini and Kanger Subtank MINI Hybrid
I understand this hybrid allows me to use my own coils if I want to..

Any suggestion on what should I pick?
I went for the mini versions as I hope this setup will be fairly portable.
Fot the coils and juices, I guess it will be trial and error

 

[pgi947]

For a first time user the nautilus mini gets lots of recommendations

 

[Rilot]

It depends on how you want to vape. If you want to do mouth to lung, then the Aspire Nautilus is good. If you want to do big lung inhales then the Subtank is your man.
I'd probably get the Subtank as it gives you the option of doing either, plus you can try out building your own with the rebuildable section.

 

[slinxy]

so...my eGo One mini is utter ** Swear words must be fully starred ** , I'm going to return it (with the 0.5 and 1ohm: it crackles, hot juice spits out via the mouth piece, also juice comes out via the air holes)

I will order something someone suggested :
iStick TC40W
For the tank I'm torn in between Aspire Nautilus Mini and Kanger Subtank MINI Hybrid
I understand this hybrid allows me to use my own coils if I want to..

Any suggestion on what should I pick?
I went for the mini versions as I hope this setup will be fairly portable.
Fot the coils and juices, I guess it will be trial and error

Try some different juice.. A lot of the issues of spitting/hissing and flooding is down to users sucking too hard, not running there devices at a high enough power setting or using high pg juices.

Try getting some 50/50 juice.

 

[Gregster]

I have a stronger nicotine for mouth to lung on my Kayfun (12mg for those tetchy days) and sub ohm 3 or 6mg for those relaxed stress free days. Both are great.

Running 3 different tanks for sub ohming tank to lung (Delta II, Aspire and Billow V2).

 

[blackice8r]

Try some different juice.. A lot of the issues of spitting/hissing and flooding is down to users sucking too hard, not running there devices at a high enough power setting or using high pg juices.

Try getting some 50/50 juice.

I'm using a 50/50 juice..
the thing spits juice without me pulling , really dodgy

I'll go for the Kanger tank then, for the flexibility
Edit: got an Aspire nautilus, too many people complained that Kanger leaked

 

[UKDTweak]

I have all size kanger tanks and never had a leak, however, if you dont clean up access juice around the glass when you take off and replace the top after filling, you can get some juice that gets squeezed out as you tighten it down.

Got the Crown working with the .5 Stainless Steel coil head, the RBA would not work in temp mode on the DNA200 for some reason... it registers the ohms ok, but only fires in normal power mode, also noticed the Coil Master Tab could not read the RBA coil ohms yet reads the coil head ohms fine, so im guessing the connection on the RBA deck is not very good, might rebuild it with a Titanium one and try again, but im enjoying the .5 coil head at 35w, 240c... and re filling it is a breeze.

 

[At The Gates]

What's the best batteries these days? My VTC4s are getting pretty warm using the 0.25Ohm Crown coil at 75w. Bought them from a reuptable dealer so i assume they're genuine...

Was going to get some spares anyway, this time from Torchy's ebay shop. Samsung 25R, 30Q? Or the LG HE4s?

 

[Rilot]

Edit: got an Aspire nautilus, too many people complained that Kanger leaked

The original Subtank leaked. The Minis are fine. Never had a single leak.
You can't go wrong with a Nautilus though.

 

[UKDTweak]

What's the best batteries these days? My VTC4s are getting pretty warm using the 0.25Ohm Crown coil at 75w. Bought them from a reuptable dealer so i assume they're genuine...

Was going to get some spares anyway, this time from Torchy's ebay shop. Samsung 25R, 30Q? Or the LG HE4s?

If getting from Torchy then the 30q's seam to be the good choice these days

 

[Dude]

Just put a twisted Ti build in crown RBA base , 2 strands of 30 gauge 6 wraps around 2.5 mm drill(probably opened up to 3.0mm as it is springy).
After a bit of messing around(DNA 200 wouldn't run in temp control) & now vaping at 40w 350f , much prefer it to Ni.
Cold ohm's .46.
Not sure why DNA 200 was having problems but probably the idiot setting it has something to do with it

 

[Digital X]

I've literally no idea about the machines themselves, but online I've seen gigantic vape clouds, how is this done? Longer draw or altering the device? I can only do so much with a cigarette.

 

[balky12]

I've literally no idea about the machines themselves, but online I've seen gigantic vape clouds, how is this done? Longer draw or altering the device? I can only do so much with a cigarette.

Probably using drippers with wide airflows and wide bore drip tips. Sub ohm (less than 1ohm) build probably dual coil and high power. Long draw obviously helps.

 

[Twirlywoos]

What's the best batteries these days? My VTC4s are getting pretty warm using the 0.25Ohm Crown coil at 75w. Bought them from a reuptable dealer so i assume they're genuine...

Was going to get some spares anyway, this time from Torchy's ebay shop. Samsung 25R, 30Q? Or the LG HE4s?

They are literally the same.


http://ukvapers.org/Thread-LG-HE2-v-LG-HE4

 

[D D Danneh]

So I keep getting told my juice mixes are really good, so I'm considering upping scale a bit. Get or make myself a rack, more supplies, flavours, get some proper steeping going on, using fresh bottles rather than reusing old ones, and perhaps selling some to the shop I used to work at.

So my question is what sites do you DIY guys order from? Cheap, bulk, quality PG, VG and nicotine? Decent bottles (I quite like the ones TPA flavourings come in, seems like they don't leak and seal easy)? Site with a wide range of flavours at a reasonable price?

 

[Crowort]

Got the aromamizer rdta today. Been so long since I build a coil it took ages just to get anything that even worked let alone good. Resistance was jumping all over the place but a quarter turn of the 510 sorted that out. Think I'll need to drop my nic down again for this, getting a rush using it.