***The Vapers Lounge*** 2.0

[UKDTweak]

Cheers Froz, i sent a reply nice work m8.

So i decided to re coil my Mutation V2 to use for testing the sample juices i got, went with the dual twisted 26awg titanium wire again, hand twisted as i dont have a drill to hand, just used the Coil master and a Kuro coiler... so easy and takes seconds.
Came out to around 0.06ohms, hitting it with 65w and its a nice vape, not so sure about my sample flavours though lol

 

[Frozennova]

Cheers Froz, i sent a reply nice work m8.

Cant see a reply my end bud

 

[Greebo]

just a heads up, i bought 20 bottles of nicotine from vape escape last night, £3.50 a bottle for 54mg stuff. They are having their final reductions before they close.

 

[UKDTweak]

Vapemail, Elegant Vapour have come through for me again, after sending me the wrong tank yesterday, i emailed them, they said they would send me the correct tank and a return envelope to send back the Crown tank, and that was yesterday and today my Aromamizer has arrived along with a pre paid envelope
Excellent service once again.

 

[Rilot]

just a heads up, i bought 20 bottles of nicotine from vape escape last night, £3.50 a bottle for 54mg stuff. They are having their final reductions before they close.

I just bought 5 bottles myself.

 

[Baron C]

Goblin mini rta...superb little thing. It's wicking superbly @0.20. Lovely vapour and taste.

 

[Crowort]

Well today is my 5th vaping anniversary. To think of the rubbish we used to use only 5 years ago. I think they were just known as 510 atties, like of a dripping attie that we put little sponge caps on.

 

[Josh]

TommyV I need to give you a cyber high 5!

That fruity slurricane mix is amazing! Ta bud

How long do you think I need to steep the Unicorn Milk clone for?

 

[TommyV]

TommyV I need to give you a cyber high 5!

That fruity slurricane mix is amazing! Ta bud

How long do you think I need to steep the Unicorn Milk clone for?

very welcome dude, I find the only things that's really subjective is the amount of tangerine. The original recipe is 5% but I use 4.5%, will probably try it as low as 3%.

Unicorn milk - I reckon give it a couple of days in a dark cupboard, then 24hours with the lid off, then another 10-14 days in a cupboard again

 

[Josh]

Nah the mix for me is spot on, lovely and fruity.

Roger will give the milk a good steep!

 

[Twirlywoos]

Well today is my 5th vaping anniversary. To think of the rubbish we used to use only 5 years ago. I think they were just known as 510 atties, like of a dripping attie that we put little sponge caps on.

What so you didn't throw away your boge cartomozer with a pipe punch

 

[A[L]C]

cartos, clearos I remember them fondly.... well not so fondly, but I remember them

 

[Rimsy]

I've got what I'm sure is a silly question but I've been out of the loop for a long time and vaping tech has moved on bigtime since I last poked my nose in (just for reference I've used the same pro vari / kayfun lite combo for the last 18 months or so - coil at 1.7Ohm 3.7V output).

So all this sub ohm stuff - how do people create coils with such low resistance and such high output and not end up with horrible burnt coils/juice?

 

[Twirlywoos]

I've got what I'm sure is a silly question but I've been out of the loop for a long time and vaping tech has moved on bigtime since I last poked my nose in (just for reference I've used the same pro vari / kayfun lite combo for the last 18 months or so - coil at 1.7Ohm 3.7V output).

So all this sub ohm stuff - how do people create coils with such low resistance and such high output and not end up with horrible burnt coils/juice?

They have temperature control devices.

Skip to 11:00 mins just to get an idea of what it basically does

https://www.youtube.com/watch?v=ECo4JPq7_LY

 

[triggerthat]

How often should you be changing cotton?

 

[Frozennova]

I've got what I'm sure is a silly question but I've been out of the loop for a long time and vaping tech has moved on bigtime since I last poked my nose in (just for reference I've used the same pro vari / kayfun lite combo for the last 18 months or so - coil at 1.7Ohm 3.7V output).

So all this sub ohm stuff - how do people create coils with such low resistance and such high output and not end up with horrible burnt coils/juice?

Which wire and large diameter coils is the Key to low resistance and coils that will take big power

How often should you be changing cotton?

 

[Crowort]

How often should you be changing cotton?

Depends how much you vape. I do it every 3-4 days.

 

[UKDTweak]

Home at last and got to put a build in my new 2nd Aromamizer, this time i stuck with 26awg dual twisted coils, but horizontal, and i trimmed the tails to reduce the amount of cotton in them and then fluffed them up before pushing under the coils to the deck..

65w pre heat and 55w normal... massive clouds and nice warm flavourful vape, far better than the horizontal coils and puts the Aromamizer back on top over the Crown...



Sub ohm... Meh!... Super Sub ohms where its at

 

[UKDTweak]

I change my wicks every one to two weeks, you get a feel for when it needs replaced as flavour and vapor reduces, it does not wick as well...

Pushing the pre heat up to 70w and 65w normal and this tank is still not getting close to the 230c limit ive set, only getting to 200c at best... damn this is one power hungry setup

Ive never had a temp limited atty setup get this high a power, me Lemo's topped out at 35w and the Smok TFV4 around 40w... the Crown i got to 45-50w, but this is mental, tried it even at 80w and after a 3 sec puff, it started to hit temp limit...

 

[slinxy]

How often should you be changing cotton?

Change cotton? I change my whole atty.. lol
joking aside.. 4/5 tanks, but it's very much dependent on what juice I'm using.. RDAs I tend to pull out after I've finished with them, as by the time I get back to that RDA, the cotton would be manky.