***The Vapers Lounge*** 2.0

Status
Not open for further replies.
Anyone tried the Smok Clapton Coil TF-CLP2 .

Was just about to place an order on Fasttech for some Q4's but noticed that since last time i ordered some they have added several other coils.

TF-T3
TF-Q4
TF-N2 & Air
TF-T2 & TF-T2 Air
TF-Ti
TF-S6
TF-CLP2
 
pgi947 said:
I got 105ml in my £50 box, though I suppose it depends what the value of the non juice parts comes to :)
Click to expand...
That's roughly on par with what £/ml most liquids cost at the local B&Ms...
Depends on whether that £50 always gets you that 105ml or more, or whether the quoted 2 bottles might turn out to be a pair of 10ml ones...

Depends also on what hardware gets sent, I suppose... if it's always another dripper or tank, that could get very disappointing very quickly.

pgi947 said:
I was enjoying the beard no71 I got with mine, then my Mrs knocked the bottle over and smash :(
Click to expand...
And she is replacing it when...? :D

infernox said:
Also, what do everyone use to hold all of there stuff. I have bottles all over the place. Looks proper messy. Need a nice little box.
Click to expand...
Make one - That's what I'mma do.
Floor, sides and dividers.
Drill some holes sized to hold your tanks, then have divided rows or something to line your bottles up. Add an extra area for any tools and accessories you might want.
 
ttaskmaster said:
Make one - That's what I'mma do.
Floor, sides and dividers.
Drill some holes sized to hold your tanks, then have divided rows or something to line your bottles up. Add an extra area for any tools and accessories you might want.
Click to expand...

With my highschool grade woodworking skills :p

It would look really really awful. Like abysmal.

B&M would likely have an arts and crafts box that would do the trick I would assume. I have loads of the shops nearby me that could work. Wilko, the Range, Bargain Buys. All of those strange shops with cool stuff! One could then be modified with said drilling! That I could do!
 
infernox said:
With my highschool grade woodworking skills :p
Click to expand...
I don't have any of that at all, so you surely can't do any worse than me...

infernox said:
All of those strange shops with cool stuff! One could then be modified with said drilling! That I could do!
Click to expand...
Or get an appropriately sized jewelry box off rainforesty-auction type places, perhaps?
Those usually have divisions, at least.
 
Rilot said:
Pre-ordered the new Aromamizers this morning. Ordered:

1 x Supeme in black
2 x RDTA V2 in black
2 x V1 to V2 upgrade kits
Click to expand...

You're a true craver my friend! :D

I'm holding off for a while, would grab an upgrade kit and nippless top, but it doesn't quite meet what I think is a $40 threshold for the 20% off to work.

Going to sell one of the V1's and hang tight until the upgrade kits are available in the UK.
 
DNA200 version is infinitely configurable with Escribe. Most people don't need this though and the RX200 works very well. RX200 is a bargain of a mob IMO. I have both version by the way.
 
Hi guys,

I've been using one of those Ego-lite ecigs for a few months and it's time to progress a bit further - I'm sick of the lacklustre vapour production and the lack of taste.

Any pointers on a semi decent kit that includes the battery and tank etc to get me going? Am I right in thinking a sub ohm coil is the way to go and what's the score with changing coils?

Cheers :-)
 
FML1990 said:
Whats the difference between the 2?

I have the RX200. Girlfriend wants a new mod. So want to see if the DNA is much different?
Click to expand...

Different controller chips inside in essence.

As Rilot said the DNA200 is hugely customisable (Far more than any user actually needs IMO, I've not tried the RX200 but I'd wager the Temperature Control is more accurate if it's your thing as well as the general board output (Higher quality components on the board and configurable internal mod resistance)
 
bradUK said:
Hi guys,

I've been using one of those Ego-lite ecigs for a few months and it's time to progress a bit further - I'm sick of the lacklustre vapour production and the lack of taste.

Any pointers on a semi decent kit that includes the battery and tank etc to get me going? Am I right in thinking a sub ohm coil is the way to go and what's the score with changing coils?

Cheers :-)
Click to expand...

You don't necessarily need go for a Sub-ohm setup to improve vapour production and flavour.

A Beyond Vape Silo or Nautilus Mini paired with an Evic VTC Mini would make a great step I'm both departments compared to what you are using


If you do however want to move to a Sub-ohm lung inhale vape then the world is your oyster, for simplicity and flexibility I'd probably recommend one of the Kanger Topbox kits.

It's a top fill tank which makes life a lot easier, theres a good range of stock coil heads available, the mod and the tank both allow for temperature control if you wish to try it and there's also a rebuildable coil head in the kit should you wish to start building you own coils
 
Frozennova said:
You don't necessarily need go for a Sub-ohm setup to improve vapour production and flavour.

A Beyond Vape Silo or Nautilus Mini paired with an Evic VTC Mini would make a great step I'm both departments compared to what you are using


If you do however want to move to a Sub-ohm lung inhale vape then the world is your oyster, for simplicity and flexibility I'd probably recommend one of the Kanger Topbox kits.

It's a top fill tank which makes life a lot easier, theres a good range of stock coil heads available, the mod and the tank both allow for temperature control if you wish to try it and there's also a rebuildable coil head in the kit should you wish to start building you own coils
Click to expand...

Thanks bud!

Something like this; http://www.vapeclub.co.uk/vape-club...rter-kits/kanger-topbox-nano-starter-kit.html
 
bradUK said:
Thanks bud!

Something like this; http://www.vapeclub.co.uk/vape-club...rter-kits/kanger-topbox-nano-starter-kit.html
Click to expand...

That's the one.

Youll need a couple of batteries and a charge too

Pair of Samsung 30Q - http://m.ebay.co.uk/itm/181733604350?_mwBanner=1
XTAR VP4 Battery Charger - http://m.ebay.co.uk/itm/181766037108?_mwBanner=1
The Samsung 30Q will offer you the best battery life while being able to supply enough current safely. The XTAR is a solid charge with 1A charging and both mains and USB input. It's also a 4 bay charger so should last you a long time
 
Rilot said:
DNA200 version is infinitely configurable with Escribe. Most people don't need this though and the RX200 works very well. RX200 is a bargain of a mob IMO. I have both version by the way.
Click to expand...

Had more of a read shortly after I posted the question. I don't need the DNA nor does my girlfriend. Seems like overpriced nonsense.

Now I just need to find somewhere I trust that sells the RX200. The few places I shop seem to of stopped selling it.
 
FML1990 said:
Had more of a read shortly after I posted the question. I don't need the DNA nor does my girlfriend. Seems like overpriced nonsense.
Click to expand...

I agree that you probably don't need it, but it's not overpriced nonsense. The DNA200 controller is fantastic and works extremely well if you want to get in to that sort of thing. I have several DNA200 devices and love them all due to the configurability. I can get my vape exactly how I want it with whatever wire I want.

For most users it's not necessary.
 
Anyone got a link for a Blueberry Froyo (sp?) clone?

My pal just let me try it, it was amazing but not £15 for 30ml amazing.
 
Status
Not open for further replies.
Back
Top Bottom