Temps after running overnight
Ok, but what are loads temps, running prime95 or something to max out the cpu, unless of course your running some crazy cooling solution, 1.4v is too much from what a lot of people have reported.
The Z77 Sabertooth Club.
- Thread starter xxShinobixx
- Start date
Ok, but what are loads temps, running prime95 or something to max out the cpu, unless of course your running some crazy cooling solution, 1.4v is too much from what a lot of people have reported.
Well, I just joined this club.
Only reason was I thought I had knocked a capacitor loose on my P8Z68 Pro Gen 3 when moving to new case, as suddenly needed to up the volts slightly on my 3770K for previously well tested 4.9GHz at 1.25/1.26V. Turns out had nothing to do with board, as getting no better results on Sabertooth.
I honestly think this is a worse clocker than the Z68 though. On the Z68, I could almost get the chip running at 5GHz with around 1.32V, though did eventually get error in prime. On the Sabertooth, at 5GHz I just get BSOD and I tried up to 1.34V
Not sure I will remain a member of this club, but I do need to play with board more I guess....
Only reason was I thought I had knocked a capacitor loose on my P8Z68 Pro Gen 3 when moving to new case, as suddenly needed to up the volts slightly on my 3770K for previously well tested 4.9GHz at 1.25/1.26V. Turns out had nothing to do with board, as getting no better results on Sabertooth.
I honestly think this is a worse clocker than the Z68 though. On the Z68, I could almost get the chip running at 5GHz with around 1.32V, though did eventually get error in prime. On the Sabertooth, at 5GHz I just get BSOD and I tried up to 1.34V
Not sure I will remain a member of this club, but I do need to play with board more I guess....
Soldato
- Joined
- 27 Oct 2006
- Posts
- 7,020
- Location
- London
Triple post ?!
FFS Dude.... Keep this up and we'll revoke your membership, confiscate your board and pass it on to someone who knows how to use it
ps Who let him in ?
FFS Dude.... Keep this up and we'll revoke your membership, confiscate your board and pass it on to someone who knows how to use it
ps Who let him in ?
Triple post ?!
FFS Dude.... Keep this up and we'll revoke your membership, confiscate your board and pass it on to someone who knows how to use it
ps Who let him in ?
If I post 12 hours apart, no, I don't edit previous post.
If it were a few minutes or even hours, when yes, I would. Normally.
With his purchasing history he will be most likely gone in a few days having purchased another board or two
Oi, watch it!
Yeah, it has been bad though
Despite seeming to require a bit more voltage than the Z68, I do like the board - after figuring out what was causing memory issues.
I think I will be keeping it. Maybe
Soldato
- Joined
- 27 Oct 2006
- Posts
- 7,020
- Location
- London
With his purchasing history he will be most likely gone in a few days having purchased another board or two
Awesome
Soldato
- Joined
- 27 Oct 2006
- Posts
- 7,020
- Location
- London
Now, be nice.
Not like there many members here posting away
It is all in jest.
Have you managed to overcome the issue where your system starts to dismantle itself if you are closer than 3ft to the box..?
It is all in jest.
Have you managed to overcome the issue where your system starts to dismantle itself if you are closer than 3ft to the box..?
That literally made me laugh out loud
It is all in jest.
Have you managed to overcome the issue where your system starts to dismantle itself if you are closer than 3ft to the box..?
He just like to play with the hardware and not the PC
Looks great.
Almost makes me want to ditch my Phanteks so I can actually see my stuff
If you can't remember password, you will need to reset.
Last edited:
- Joined
- 20 Nov 2010
- Posts
- 739
- Location
- Sunny Hull
Just couldn't get my memory to 2133 on this board. Probably could have if had spent ages on secondary and third timings, but life's too short.
Still 2000 isn't too bad I guess.
Perhaps when new BIOS comes out I will be able to use lower voltage on CPU and up the memory speeds without too much trouble.
Still 2000 isn't too bad I guess.
Perhaps when new BIOS comes out I will be able to use lower voltage on CPU and up the memory speeds without too much trouble.