• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Was mad?

Well.

Tested bottom dvi - no luck
Tested top dvi - catleap 1440p monitor works fine
Tested hdmi - no luck
Tested mini dp 1 - works with apple adapter on hazro
Tested mini dp 2 - works but produces fuzzy lines

Put never winter on and it ran ok.

Card buzzes when idle... no idea why but under load if silent.

Will keep useing it for a day or so and if its still ok I will watercool it.

Bargin ;)
 
Well.

Tested bottom dvi - no luck
Tested top dvi - catleap 1440p monitor works fine
Tested hdmi - no luck
Tested mini dp 1 - works with apple adapter on hazro
Tested mini dp 2 - works but produces fuzzy lines

Put never winter on and it ran ok.

Card buzzes when idle... no idea why but under load if silent.

Will keep useing it for a day or so and if its still ok I will watercool it.

Bargin ;)

Seems you got a bargain :cool:
 
It crashed after 15 mins in Bf3, So i have disabled ULPS

Its flickering idle due to downclocking to 300/150, anyone remember how to keep that up? i forgot lol
 
There are two plugged in all ready :/

1 via DVI-D and 1 via Displayport

Strange, and you have them both turned on right ? and if you do and its down clocking to 300/150 ect then that should not be happening, as thats the reason why your screen is flickering, they should be running @ 500/1375 and not dropping, i am running 2 cards and 1 plasma and 1 monitor and 1 of my cards runs at 500/1375 all the time and 1 runs at 300/150. which is normal..

but yours seems to be down clocking even though you have more than 1 connected display. strange indeed, probably a fault with driver configuration, or drivers need reinstalled.
 
Updated the OP.

I also found that without the Red button pressed in the DVI ports don't work at all. Only one MiniDp would :/

With it pressed in though i get the use of the DVI-D back.

Oh and to make things better, i have control of the Vcore and Vmem settings! This card has some hefty VRM's so i will have some fun overclocking this beast!

I fixed the Flickering by reinstalling 13.4 Drivers :)
 
Isn't the red button just a BIOS selector? with only the one selected in the "in" position supporting over clocking, could be the BIOS selected in the "out" position is just corrupt /shrug
 
Back
Top Bottom