What "man jobs" have you done today?

I spent my weekend having fun in the loft! Adding more insulation - really not a fun job, with such a shallow pitched roof and over 45sqm to deal with. I was drenched by the end of it. Took about 5hrs or so.



I stupidly forgot to take a before picture.



Other side of the chimney on the southern wall. We have a big water tank in front of the chimney which meant it was awkward to get all the insulation down everywhere, but squeezed it in where I could.



Making progress, don't worry I flattened all the tufts and made sure there were no gaps.



More... From the other side of the chimney.



Don't worry that's not a power cable - it's a tv aerial cable. The black cable is a network cable for a camera.



That's good enough - I certainly hope it'll make a difference!



I haven't taken any more pictures from the other half of the loft as it's boarded, but had to go down the sides to add bits where the boarding didn't span to. Ideally I should clear the loft and redo it completely, I'd like to board more of the loft, but honestly, with such a low pitch I can't say I relish doing it.

Despite my PPE I still feel a bit itchy! :D I know it's psychological... but anyway, that's a job done. Not bad for under £80 really.
I guess I should not do this myself if I suffer from ezcema?
 
I guess I should not do this myself if I suffer from ezcema?

I'm not a doctor nor an expert, but if you cover yourself up properly you should be ok. However, I'm not suggesting you do but if you do have sensitive skin or skin prone to something like eczema then I probably would check with a dermatologist first!
 
I'm not a doctor nor an expert, but if you cover yourself up properly you should be ok. However, I'm not suggesting you do but if you do have sensitive skin or skin prone to something like eczema then I probably would check with a dermatologist first!
Just to throw a spanner in the works. I’ve had sensitive dry skin all my life. My fiancé is the opposite. Has good oily skin. She helped me when I did my loft insulation. She itched really bad and I didn’t find it that bad, and I did it in shorts and a t-shirt.
 
I only remembered I should have been wearing overalls and a mask after I finished putting the first two rolls of insulation down. :D
Horrible job though, and certainly happy that it's done.
 
Last edited:
Threw up the CCTV camera on the shed. These things are great, lightyears ahead of 10 years ago. The bundled app works well, too. It has an SD card to record which has bought me a bit of time in terms of getting the NVR setup.

QxYrLyv.jpg
 

Chucked this work bench up. Partly for storage but partly to get the next electronics project underway.
 
Threw up the CCTV camera on the shed. These things are great, lightyears ahead of 10 years ago. The bundled app works well, too. It has an SD card to record which has bought me a bit of time in terms of getting the NVR setup.

QxYrLyv.jpg

Reolink?

I have a few of them, they're really not bad. Their NVR software is ok, though they can stream via ONVIF / RTSP and perhaps other protocols.
 
Reolink?

I have a few of them, they're really not bad. Their NVR software is ok, though they can stream via ONVIF / RTSP and perhaps other protocols.
Yeah I've been using proper no name cameras with BlueIris for a decade; so not having to have BlueIris immediately is quite useful (will be a while before the home server is stable).
 
I spent my weekend having fun in the loft! Adding more insulation - really not a fun job, with such a shallow pitched roof and over 45sqm to deal with. I was drenched by the end of it. Took about 5hrs or so.

Its awful job in a tight loft! I did mine in shorts and a t-shirt though (plus same mask and gloves!) but certainly took my time / longer than you for a similar sized loft. I'd say it's a sound job with gloves and a mask. I've done it in overalls etc before but I did it in June and was roasting!

Also sorted my sink and tiling. Just need to tidy up /filler edges of the worktop. Had to buy a different (£100 Grohe!) tap to fit in the space I wanted

2hW0TVp.jpeg


CVVNnkb.jpeg


The money shot... I'm sure some will disagree with using plastic but hey.

Nfbbjox.jpeg
 
Last edited:
Its awful job in a tight loft! I did mine in shorts and a t-shirt though (plus same mask and gloves!) but certainly took my time / longer than you for a similar sized loft. I'd say it's a sound job with gloves and a mask. I've done it in overalls etc before but I did it in June and was roasting!

Also sorted my sink and tiling. Just need to tidy up /filler edges of the worktop. Had to buy a different (£100 Grohe!) tap to fit in the space I wanted

2hW0TVp.jpeg


CVVNnkb.jpeg


The money shot... I'm sure some will disagree with using plastic but hey.

Nfbbjox.jpeg
At least you've made the joints accessible. Our bathroom unit looks like that underneath, but the pipes and waste come up that space at the back. I've not changed the tap yet, but I think it will be a royal pain.
 
Also used some cutoff valves too - the guys that did our bathroom before we bought the house didn't even install any 22mm full bore ones for the bath.. so sorting out the pipework for a short off it meant shutting off the house water until I fitted a pair.
 
Also used some cutoff valves too - the guys that did our bathroom before we bought the house didn't even install any 22mm full bore ones for the bath.. so sorting out the pipework for a short off it meant shutting off the house water until I fitted a pair.
Really annoys me when I find that kind of thing in my house. How hard is it to fit them? Lazy! Makes me question everything else about their work too.
 
Threw up the CCTV camera on the shed. These things are great, lightyears ahead of 10 years ago. The bundled app works well, too. It has an SD card to record which has bought me a bit of time in terms of getting the NVR setup.

QxYrLyv.jpg
Good cameras those, had one up on my shed for a few years now, with never a problem.
 
Got bored so went rummaging .....

I had a load of gravel boards delivered a while back to clad two sides of the gazebo and they lifted it off onto two timber skids. I thought they were some chunky softwood, but they weight an absolute ton and definately hardwood. About 5" square and 4 foot odd long

IMG-20220915-134407.jpg


They've been in the garage and device to process them so started off sawing into burner friendly lengths

IMG-20221009-132738.jpg


Then split them down

IMG-20221009-133859.jpg


Initially started with the x7 hand axe, but it's a chopping axe and was way too much effort, so broke out the big boy, which was overkill but enjoyable :D

IMG-20221009-133911.jpg


Quick test with the moisture meter

IMG-20221009-134056.jpg


Not the dryest, but pleasantly surprised and will be getting burnt mixed in with some dryer stuff.
 
Got one of those beds with rams that lift it for storage, which is great, but the base is cloth and it is a pig to move.

So out came the tools, framework made and lockable wheels added. It now moves with ease.

6rJ5uGP.jpg
 
Back
Top Bottom