X79 Overclocking Guide
- Thread starter 8 Pack
- Start date
Caporegime
I have i thought. That's what the pink numbers are to the right. Or do you mean something else?
He jsut mean manually set them teh same.
TREFI 7936 is best balance.
Otherwise thats pretty tight timing. Maybe 9-11-10? pr TWCL 5 or thirds 3,3,0,0,4 or 3,3,0,0,3.
Not much to improve on. Good tuning.
TREFI 7936 is best balance.
Otherwise thats pretty tight timing. Maybe 9-11-10? pr TWCL 5 or thirds 3,3,0,0,4 or 3,3,0,0,3.
Not much to improve on. Good tuning.
Caporegime
Ah it's cos one set goes lower on the voltage than the other if i do that by about 20v or more.
Cheers will try those timings tomorrow, i feel like there is room to go further. These sticks are great.
Caporegime
did you try juggling the sticks around ? just incase its the actual stick
Soldato
Seems odd doesn't it? (I'm really not an expert here)
I thought Quad channel RAM sets would be matched better and was the reason why you don't buy 2 Dual Channel kits for Quad channel setups?
Soldato
Blimey 20v 
Caporegime
Blimey 20v
Yeah it's weird. I will snap a screenshot later. I have a new 1300W SF PSU coming today so maybe that will help things. This 1000W still does the job, but now i don't have to hold back the gpu clocks. Watch out Frosty, I'm coming for you.
I have a new 1300W SF PSU coming today so maybe that will help things. This 1000W still does the job, but now i don't have to hold back the gpu clocks. Watch out Frosty, I'm coming for you.
You'll have shut downs b4 you catch him
Soldato
Nice timings matt is that at 2133??? Have you tried cas8??
is that at 2133??? Have you tried cas8??
Soldato
No that's 2400 I think. They go well, I wasn't kidding
I run similar timings for benching but prefer the lower VCCSA. I'm a stickler for efficiency
I run similar timings for benching but prefer the lower VCCSA. I'm a stickler for efficiency
Soldato
Yeah it's weird. I will snap a screenshot later. I have a new 1300W SF PSU coming today so maybe that will help things. This 1000W still does the job, but now i don't have to hold back the gpu clocks. Watch out Frosty, I'm coming for you.
Aim high
http://hwbot.org/submission/2604802_
Caporegime
Eh Rome wasn't built in a day lol.
Soldato
What's your physics score Matt in firestrike???
Got mine up 500ish pts running ram at 2450 8-12-8-20 (these may do cas 7 at this speed but not sure how much I can push the volts, these settings are at 1.8v) but this is in dual channel, need to source 2 more sticks of these so I can run quad but finding some is going to be difficult
@8Pack, what are max volts for PSC with high perf fans for bench??
Also get code 01 on board when switching ram, think the boards warping as test bench is acrylic and that bows from the weight. What is 01 code for??
Got mine up 500ish pts running ram at 2450 8-12-8-20 (these may do cas 7 at this speed but not sure how much I can push the volts, these settings are at 1.8v) but this is in dual channel, need to source 2 more sticks of these so I can run quad but finding some is going to be difficult
@8Pack, what are max volts for PSC with high perf fans for bench??
Also get code 01 on board when switching ram, think the boards warping as test bench is acrylic and that bows from the weight. What is 01 code for??
Last edited by a moderator:
Caporegime
At stock Nick it's around 14,500. 4Ghz cpu, 2400Mhz mems with timings above.
Soldato
Caporegime
who runs stock????
I was comparing to Kaaps 3960x at the time. I ran one last night at 4.5ghz and got about 16800 i think.
That's as far as ive gone so far.
Caporegime
Wasteful, just wasteful
It's early days and im not done yet. Having now spent a lot of time on it though im dying to play some games. Got my 1300W psu in now and just reinstalled windows, so will play some games for a bit then get right back on it.
What's your physics score Matt in firestrike???
Got mine up 500ish pts running ram at 2450 8-12-8-20 (these may do cas 7 at this speed but not sure how much I can push the volts, these settings are at 1.8v) but this is in dual channel, need to source 2 more sticks of these so I can run quad but finding some is going to be difficult
@8Pack, what are max volts for PSC with high perf fans for bench??
Also get code 01 on board when switching ram, think the boards warping as test bench is acrylic and that bows from the weight. What is 01 code for??
01 RAM cant reach frequency with those settings or IMC is struggling to be trained.
PSC 1.85