***The Vapers Lounge*** 2.0

Status
Not open for further replies.
Just building list to start making my own juice.

Going to get x5 30ml flavouring concentrate from Vampire Vape, love there liquid so wanting to use ready made stuff.

Just a quick question how many 30ml bottles made up would 150ml of concentrate make?

Have 1 litre of PG and VG in my basket.
 
Vapour Depot are sending my pictures of the issues to Cthulhumod to see what they have to say about it.

Top service from them by the way. Highly recommended.
 
Gregster said:
Nice one. Great tank and I find I am using it more than my Kayfun at the mo, so that is a big plus for it.
Click to expand...

The deck is a bit small to get the chimney cap over and depending on gauge wire used it may become a pita for some, but apart from that it's relegated the Kafun and Russian. If there is a v3 with a bigger deck I wouldn't hesitate to buy another one. This thing is just simple and works like a champ, no silly juice control and has an easily adjustable air control ring with the right amount of tension. The juice channels are deep enough to keep the cotton wet to prevent dry hits.
 
Howdy,

Does anyone have any recommendations for a decent Sub-Ohm Tank which supports Temp Control?

I have a TC40W iStick and am getting frustrated with my old Nautilus tank so would like to upgrade to Sub Ohming and utilise the TC.

The Aspire Atlantis V2 looks decent and I think I've seen TC coils available, but the Aspire Triton also looks good however I'm not sure if there are TC coils for it or if it is actually reviewing well.

Any recommendations would be appreciated.

Thanks in advance.
 
Last edited:
NVP said:
Howdy,

Does anyone have any recommendations for a decent Sub-Ohm Tank which supports Temp Control?

I have a TC40W iStick and am getting frustrated with my old Nautilus tank so would like to upgrade to Sub Ohming and utilise the TC.

The Aspire Atlantis V2 looks decent and I think I've seen TC coils available, but the Aspire Triton also looks good however I'm not sure if there are TC coils for it or if it is actually reviewing well.

Any recommendations would be appreciated.

Thanks in advance.
Click to expand...

I can't speak for stock coils as I build my own, but as a device the subtank mini is fantastic for temperature control (have one sat on my iStick 40W next to me right now with a divine key lime cookie flavour!).

.31 ohm TC coil @ 400F is making for a great and very flavoursome vape.

Unfortunately I cannot advise on their stock coils though, but with TC it can't be that hard to go wrong as you'll never get a dry hit :p
 
I have a Subtank with an Ni200 stock coil, its not bad, the RBA with a Titanium coil is better, but the Ni200 head gives a decent vape and is a good start for a newb that's not yet ready to build their own.
It is a little weak on flavour and heat, but still ok for beginners..
 
Of the Atlantis V2 and the Subtank Mini I personally think the Atlantis is a nicer vape on pre-built nickle coils.

I need to find a Lipo, a small Lipo, I CBA trying to shoehorn a dual 18650 sled with a DNA200 into the CNC 1550P
 
Rilot said:
Vapour Depot are sending my pictures of the issues to Cthulhumod to see what they have to say about it.

Top service from them by the way. Highly recommended.
Click to expand...

Fancy sharing the pics? Would like to see where yours is failing and compare to my own for piece of mind :)

Forgot a sodding screwdriver again, just going to take the dual coil deck to work tomorrow and do the swap there.
 
Frozennova said:
Of the Atlantis V2 and the Subtank Mini I personally think the Atlantis is a nicer vape on pre-built nickle coils.

I need to find a Lipo, a small Lipo, I CBA trying to shoehorn a dual 18650 sled with a DNA200 into the CNC 1550P
Click to expand...

Shoehorn... that CNC box has loads of room, i have simply ground down three corners of the battery sled a little and it fits in perfectly against the back wall and leave lots of room for the chip and wires.
Hell, if you have the holes cut in the box for the buttons and mounting kit, send it to me and ill build it for you... should be simples in that size of a box after the real 1550p..
 
TommyV said:
I'm just about to bite the bullet on the nano version he's lsited as pre-order. Everything I've heard about these attys is fantastic.

edit: sod it, ordered :p
Click to expand...

If that's just a version that has a smaller tank capacity then you'll love it. It goes through a lot of juice so bear that in mind but so far the flavour is consistent. I have closed half the air hole otherwise it's like someone has turned on a fog machine.

Threads are buttery smooth and I have just refilled mine to the top which was so easy compared to the Kayfun. No leaks whatsoever. Do apply a bit of juice to the top of the chimney that screws into the top cap otherwise when you remove the bottom deck it could potentially screw out with it.
 
Ordered some "proper" vape gear which I will receive and post an update then but I am hoping to get a number of juices ordered tonight.

Any recommendations from you veterans such's as particular brands to go with or even stay away from?

I quite enjoy vapes such as Scope's Raspberry, Banana, Blueberry etc in the past but willing to try anything :D
 
UKDTweak said:
Shoehorn... that CNC box has loads of room, i have simply ground down three corners of the battery sled a little and it fits in perfectly against the back wall and leave lots of room for the chip and wires.
Hell, if you have the holes cut in the box for the buttons and mounting kit, send it to me and ill build it for you... should be simples in that size of a box after the real 1550p..
Click to expand...

Give it half hour an I change my mind. This is about the 10th time in 3 days

Ended up spending 4 hours in my Local B&M today as I had a day off work letting them get hands on with the DNA200 and showing them Escribe etc as their stock hasn't arrived yet.

Not sure how many theyve ordered but they've got the Vaporsharks due any day
 
Picked up a Uwell Crown & a strip of SS .25 ohm coils yesterday from my local B & M , mainly to see what the difference between TC & power mode vaping.
After having a poor coil( was a really wet vape ) got it set up for TC in DNA 200 , a few false starts but got it vaping pretty well.
Set it to 525F & 80w , if i set any higher wattage i go into temp controlled mode (probably due to my 3 to 4 second normal inhales),quite a nice vape .This is with airflow wide open , if i close it 1 notch temp control kicks in & vape gets pretty weak.
Tried in normal power mode & 70w was my sweet spot with airflow shut off 1 notch.
Just for giggles put a tri-coil in my TFV4 & filled with same juice , 85w with airflow about 2/3 open was my sweet spot.
Which had the best flavour ?
All very similar , just that the Crown is a very saturated vape & i do notice drops of juice hitting my tongue.Juice disappears from both tanks really quick , so the bigger tank of TFV4 is a bonus.
 
The vaporsharks are overpriced i think and initial reports suggest the paintwork is just as bad as the previous versions and for £200.. i would not be impressed to see paint chips.
Likewise the Hana has had 510 and screen issues, so not looking good for the Mainstream American mods so far, ok, the Chinese mods have not been perfect though, with brass threads on the 510 on the VT200 and the mess that was the VTBox200... but the prices are Much lower on those mods.
 
UKDTweak said:
The vaporsharks are overpriced i think and initial reports suggest the paintwork is just as bad as the previous versions and for £200.. i would not be impressed to see paint chips.
Likewise the Hana has had 510 and screen issues, so not looking good for the Mainstream American mods so far, ok, the Chinese mods have not been perfect though, with brass threads on the 510 on the VT200 and the mess that was the VTBox200... but the prices are Much lower on those mods.
Click to expand...

The only one I haven't heard anything bad about yet is the VaporShark, but they've been known to have issues in the past

3 of the regulars in the local bought the VTBox200 last night.

The Ijoy Asolo is an interesting device I had a short play with one today.

It's not as powerful as it says. We compared a Buddha V2 with some big coils and there was no compatible difference between that and 133w on the DNA200. I'm not sure what kind of Voodoo they're using but the dry hit prevention does gebuinely work. It's also tiny for a dual 18650 device

The Hammer of God V2 is also an almightly ridiculous device.
 
Ive seen a few reviews and you can see the paint has chipped on them already just testing them...
Hopefully those 3 regulars get the latest version, as the V1 had some dangerous flaws, glued 510 and reversed deans connector on the battery...
Was tempted myself but thankfully decided to wait and build my own...

The Asolo, PBusardo did a good review on that mod and was amazed and angry with it all in one lol, an interesting idea though, and seams like black magic lol
 
Status
Not open for further replies.
Back
Top Bottom