• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

ClockTuner 2.0 for Ryzen... do YOU have a Golden Sample? Post your results here. :)

Asrock X570 PRO motherboard and I ran the diagnostic and it said SILVER, 1325, 4700 Mhz so I and trying it and now it is going up - currently doing 4750! does it keep on going up under tune? I set the diagnostic voltage to 1325 as well. I set the LLC to Level2 because under auto is said it recommended more voltage
 
DIAGNOSTIC RESULTS
AMD Ryzen 9 3900X 12-Core Processor
Max temperature: 54.8°
Energy efficient: 3.61
Your CPU is SILVER SAMPLE
Recomended CCX delta: 75
Theoretical maximum CCX delta: 100
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4275 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1350 mV
Reference frequency: 4400 MHz
Recomended values for undervolting:
Reference voltage: 1150 mV
Reference frequency: 4050 MHz

Asetek 670LT 240mm
 
Last edited:
DIAGNOSTIC RESULTS
AMD Ryzen 7 5800X 8-Core Processor
Max temperature: 60.6°
Energy efficient: 3.94
Your CPU is SILVER SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4575 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1325 mV
Reference frequency: 4650 MHz
Recomended values for undervolting:
Reference voltage: 1125 mV
Reference frequency: 4325 MHz

Corsair H100i AIO
 
Last edited:
DIAGNOSTIC RESULTS
AMD Ryzen 5 3600 6-Core Processor
Max temperature: 63°
Energy efficient: 4.07
Your CPU is PLATINUM SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4450 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1350 mV
Reference frequency: 4575 MHz
Recomended values for undervolting:
Reference voltage: 1175 mV
Reference frequency: 4300 MHz

On air via Noctua Dh14 + NM AM4 adaptor
 
Last edited:
DIAGNOSTIC RESULTS
AMD Ryzen 5 5600X 6-Core Processor
Max temperature: 52.6°
Energy efficient: 4.15
Your CPU is GOLDEN SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1150 mV
Reference frequency: 4550 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1300 mV
Reference frequency: 4775 MHz
Recomended values for undervolting:
Reference voltage: 1025 mV
Reference frequency: 4275 MHz

On air Noctua NH-C14S
 
AMD Ryzen 7 5800X 8-Core Processor
ASUS PRIME X470-PRO
BIOS ver. 5837 SMU ver. 56.45.00
TABLE ver. 3672324
DRAM speed 3200 MHz
03/06/2021 06:51:52

I'm using a be quiet Dark Rock Pro 3 CPU Cooler & 2 x 16gb sticks of DDR4 on an X470 board.
I'm not an overclocker so I'll be running my memory at it's XMP rating of 3200mhz along with the stock CPU,
Before swapping over to the new CPU I did a number of benches with the 2700X I've had for the last 3(ish) years so I can compare the results with the 5800X once I'd fitted it, It's more of a real world test as all the testers tend to use high end GPU's whereas my GPU is a 5700 XT.

07:19:50: Step# 23. Diagnostic VID: 1055 mV
07:19:51: Stress test 1 started...
07:20:25: Stress test stopped.
07:20:27: Stress test 2 started...
07:21:01: Stress test stopped.
07:21:02: Step# 24. Diagnostic VID: 1049 mV
07:21:03: Stress test 1 started...
07:21:20: Thread# 4 fall down!
07:21:20: Stress test stopped.
07:21:21: Step# 25. Diagnostic VID: 1055 mV


DIAGNOSTIC RESULTS
AMD Ryzen 7 5800X 8-Core Processor
CPU VID: 1055
CPU TEL: 1038
Max temperature: 58.8°
Energy efficient: 4.21
Your CPU is GOLDEN SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4700 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1325 mV
Reference frequency: 4800 MHz
Recomended values for undervolting:
Reference voltage: 1125 mV
Reference frequency: 4475 MHz
 
Last edited:
First time I ever ran it I got:

DIAGNOSTIC RESULTS
AMD Ryzen 7 5800X 8-Core Processor
Max temperature: 59.8°
Energy efficient: 3.76
Your CPU is BRONZE SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4475 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1325 mV
Reference frequency: 4550 MHz
Recomended values for undervolting:
Reference voltage: 1125 mV
Reference frequency: 4225 MHz

The second time it said:

DIAGNOSTIC RESULTS
AMD Ryzen 7 5800X 8-Core Processor
Max temperature: 61.4°
Energy efficient: 4.1
Your CPU is GOLDEN SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4675 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1325 mV
Reference frequency: 4750 MHz
Recomended values for undervolting:
Reference voltage: 1125 mV
Reference frequency: 4425 MHz

Either way, I think mines a bit of a dud. Doesn't like any extra mhz at all or it throws a hissy fit so it only does 4850mhz max with pbo. Using CTR to tune actually settled on a 1250mv/4700mhz all core load overclock. Adding more voltage doesn't net any more out of the chip. Using a Noctua NH-U14S with two fans.
 
I cant even run cinbenench, this happens


8:38:35 pm: Cinebench stopped!
PPT limit reached! 258.8W
8:38:58 pm: Cinebench stopped!
PPT limit reached! 247.3W


Is this because im running with PBO on? does the CPU have to be stock?
 
Grim5 said:
I cant even run cinbenench, this happens

8:38:35 pm: Cinebench stopped!
PPT limit reached! 258.8W
8:38:58 pm: Cinebench stopped!
PPT limit reached! 247.3W

Is this because im running with PBO on? does the CPU have to be stock?
Click to expand...
PBO is enabled by stock... have you done any manual tweaking of settings?
Grim5 said:
Ok it runs if I set the cpu back to stock

What is a Platinum sample? Is that good or bad?

Click to expand...
Look at other peoples results and compare at each voltage. Looks worse than Bronze though.
 
Richdog said:
PBO is enabled by stock... have you done any manual tweaking of settings?

Look at other peoples results and compare at each voltage. Looks worse than Bronze though.
Click to expand...


I changed it back to stock motherboard default bios)

i think this software is buggy cause the numbers don't make sense - when I run the tune function it tries to find the max stable clocks and says that the second CCX can only handle 4000mhz at 1.3v but actually it can do 4.3ghz with that voltage, I know cause I've done it
 
Last edited:
Grim5 said:
I changed it back to stock motherboard default bios)

i think this software is buggy cause the numbers don't make sense - when I run the tune function it tries to find the max stable clocks and says that the second CCX can only handle 4000mhz at 1.3v but actually it can do 4.3ghz with that voltage, I know cause I've done it
Click to expand...
Ahh I misread which CPU you had, so for 16 cores I guess your results are good although if a test fails it is due to instability and likely caused by manual BIOS settings. The tool isn't 100% accurate obviously, it's just a "best endeavours" based on the limited testing it performs and is no substitute for manual tweaking.
 
Richdog said:
Ahh I misread which CPU you had, so for 16 cores I guess your results are good although if a test fails it is due to instability and likely caused by manual BIOS settings. The tool isn't 100% accurate obviously, it's just a "best endeavours" based on the limited testing it performs and is no substitute for manual tweaking.
Click to expand...

I had to set it back to stock to make it work. The tool seems to apply PPT limits based on processor model, for the 5950x its 120w, as long as it goes above that it stops any tests. I had manual PBO settings that allowed the 5950x to pull 260w

Changing back to stock with the cooler weather around here made me realise how much temps change between stock and overclocked, its massive. Running cinebench with PBO manual settings = 80c, running cinebench with stock defaults = 45 to 50c

The all core clocks for a stock 5950x is pathetic though thats why I can justify staying stock, it runs at just 3.75ghz in cinebench, but with manual PBO it runs between 4.35 and 4.5ghz
 
nashathedog said:
I would have thought the Platinum rating would mean it's better than Gold, similar to how the ratings are used with PSU's.
Click to expand...

Yeah, however its only showing platinum because the test thinks the CPU is running at 0watt and I dont know why. Based on the clocks the cpu looks more like a bronze sample, only showing platinum because it cant find how much power the cpu is using on this test
 
Grim5 said:
Yeah, however its only showing platinum because the test thinks the CPU is running at 0watt and I dont know why. Based on the clocks the cpu looks more like a bronze sample, only showing platinum because it cant find how much power the cpu is using on this test
Click to expand...

That's a shame, Do you manually overclock yours then? After watching a few reviews and primarily using my PC for browsing & Gaming I can't see the point in doing so for me, From what I've seen in reviews for gaming there's normally very little to gain & in some games it can hurt performance.
 
You must log in or register to reply here.
Back
Top Bottom