-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
** ATi X1k/HD 3k series overclocking guide - ATi Tray Tools and ATi Tool + FAQ **
- Thread starter FreeStream
- Start date
Soldato
- Joined
- 18 Oct 2002
- Posts
- 6,669
sablabra said:
In my sig d00d.
'01 = 40484
'03 = 22221
'05 = 13447
'06 = 6087
Though the cores seem to clock about the same on both the XTs and the XTXs, the memory does certainly seem better on the XTXs. My XTX can get 720/846 on stock volts, and a bump in volts can take the memory to 890mhz for benching with 870mhz for fully stable.
- Joined
- 10 Apr 2004
- Posts
- 13,496
Kesnel said:
I can get a pass up to nearly 900mhz with my XT, can't do that in games tho, dam ATI stopping XTs clocking
On another nite BF2 now runs @ 675/801 when I raised my PCI-E freq to 108
However that video big is ******* me off clocks go to 400/600 :/
Soldato
I have tried uping the volt, still blank screen & lockup.
Uninstalled everything drivers, ati tool & ati tray.
Still blank screen and lock ups.
Could it be my power supply is not enought. Enermax Liberty 500W ELT500AWT ATX2.2 Modular SLI Compliant PSU
What else could it be.
Uninstalled everything drivers, ati tool & ati tray.
Still blank screen and lock ups.
Could it be my power supply is not enought. Enermax Liberty 500W ELT500AWT ATX2.2 Modular SLI Compliant PSU
What else could it be.
- Joined
- 10 Apr 2004
- Posts
- 13,496
Clairvoyant said:
Are you hitting apply to the voltages???
Tis weird
Soldato
yes im hitting apply, then read.
I know its strange.
I know its strange.
- Joined
- 10 Apr 2004
- Posts
- 13,496
Disabled to two ATi Services???
Soldato
Concorde Rules said:
Ok to make sure I have done them, what are they called.
- Joined
- 10 Apr 2004
- Posts
- 13,496
ATI Hot Key Poller and ATi Smart.
Conc
Conc
Soldato
Ok finaly got it to work.
Volts 1.4 / 2.086 / 2.086 / 1.5
Got this then it locked up and crashed
2006-06-06 19:48:26 Clocks set to: 693.00 / 1003.50
Volts 1.4 / 2.086 / 2.086 / 1.5
Got this then it locked up and crashed
2006-06-06 19:48:26 Clocks set to: 693.00 / 1003.50
- Joined
- 10 Apr 2004
- Posts
- 13,496
Clairvoyant said:
DONT USE THE AUTO CLOCKS IT DOES NOT WORK.
Have you actually read my Opening post?
Soldato
Concorde Rules said:
Yes and no. lol
OK so how long do you leave ATI Tool scan for artifacts before you increase the clock.
Soldato
Jimbo Mahoney said:
no, just got a dd maze4 gpu block on it and ram sinks, got a 120mm fan under the card blowing air over it too
- Joined
- 10 Apr 2004
- Posts
- 13,496
Clairvoyant said:
It doesn't detect them, you can use the ATi Tool 3D cube to test if you want.
Opening Post Updated!!
Soldato
Volts 1.425 / 2.089 / 2.089 / 1.5
Core 702 mem 837
Temp 75 c
So is that good for stock Volts.
Core 702 mem 837
Temp 75 c
So is that good for stock Volts.
- Joined
- 10 Apr 2004
- Posts
- 13,496
Clairvoyant said:
Beter than mine!!!
I top out at 670/801 at 1.425/2.060/2.060/1.580.
Raise the bottom voltage to 1.580V and try get more mem.
Plus try and keep temps under 70C or it WILL lock.
Conc
Soldato
I will need to sort out a side fan, and move my PC as the back is about 8" from a wall.
Conc - Just read your opening post and a few other threads that you commented it on. Can you help clarify what you meant as i am kinda new to ATI so don't quite understand the concepts.
A guy mentioned he had 9.5K on 3dmark05 but you said that was only 2D mode and should get 11k in 3d mode?. What is the difference?? Do i have to do something to my card profile wise so that it run or enable 3d mode? I kinda briefly grasped this thinking that 3d mode should kick in applications and games when need be or should i require to basically do something software wise before it can run properly??
From reading the opening page what i can tell
"Right, now onto 3D. Create another profile called .3D stock’.
Click settings at the bottom right, from the drop down menu, go to Fan Settings, set this how you want to run 24/7, apply and save to the profile ‘3D stock’. Then go to Voltages and set: 1.4/2.089/2.089/1.487 in that order as you go down the settings. Then apply and save to ‘3D stock’.
Now go back to the clocks page. Set clocks at:
X1900XT: 625/725
X1900XT Crossfire Master Card: 625/725
X1900XTX: 650/775
Apply, then save to the profile ‘3D stock’."
That not even into overclocking yet so i can do that without any issues right? I feel i don't need to overclock if i can help it as i think it more than enough to do what i want.
Cheers for any advise/clarification would be appreciated for this ati noob.
Kyo
A guy mentioned he had 9.5K on 3dmark05 but you said that was only 2D mode and should get 11k in 3d mode?. What is the difference?? Do i have to do something to my card profile wise so that it run or enable 3d mode? I kinda briefly grasped this thinking that 3d mode should kick in applications and games when need be or should i require to basically do something software wise before it can run properly??
From reading the opening page what i can tell
"Right, now onto 3D. Create another profile called .3D stock’.
Click settings at the bottom right, from the drop down menu, go to Fan Settings, set this how you want to run 24/7, apply and save to the profile ‘3D stock’. Then go to Voltages and set: 1.4/2.089/2.089/1.487 in that order as you go down the settings. Then apply and save to ‘3D stock’.
Now go back to the clocks page. Set clocks at:
X1900XT: 625/725
X1900XT Crossfire Master Card: 625/725
X1900XTX: 650/775
Apply, then save to the profile ‘3D stock’."
That not even into overclocking yet so i can do that without any issues right? I feel i don't need to overclock if i can help it as i think it more than enough to do what i want.
Cheers for any advise/clarification would be appreciated for this ati noob
.Kyo