BARGAIN - OcUK 24" with DVI (*VA Panel) for £179.99+VAT (This Week Only Deal!!)

My sisters is fine, still going strong after nearly a year but as some of you may know I had a terrible time geting my one repaired.

The main problem I think is the fact these screens come with a repair warranty, which I guess is part of the reason they can be sold so cheap. So personally even though there are many working fine, if yours does go wrong you'll have a hard time getting it sorted, so I personally wouldn't recommend one.
 
Have had my DGM since 2007 from OC.. P-MVA panel. Colour profiled with a Spyder 2 suite. Still going great so far. Fingers Crossed. Got 1 red pixel on top right that I never notice unless I'm looking for it.
 
my DGM 24" is still working well... occasionally it won't resume from standby, but pressing the change-input button gets it working again.
 
Mine's getting pickup up this Friday by OcUK and being forwarded on to DGM for me as it keeps powering off randomly.
 
Hard to say really, best to check the distance between the four mounting holes at the back. What I found however is they are not threaded like the other VESA standard monitors I've owned, so if yours are not, you may have to tap them.
 
Just measured the holes on the back of my sisters DGM 24" monitor and they are 75mm apart, so that would be VESA 75mm, which the arm supports.

So yes it should work, but like I say it will depend on if the monitors holes are threaded or not.

Installation instructions for the mount can be found here: http://www.ergotron.com/Portals/0/tp/G/MX/888-45-155-W.pdf

Page six shows what you want to know and looking at it, there may be an option to use non-threaded screws with thumbscrew type heads.
 
Last edited:
Not a problem, might pay to check a few reviews or pictures of the mount and see if you can see how the arm attaches to the to the monitor.
 
You must log in or register to reply here.
Back
Top Bottom