Man of Honour
- Joined
- 14 Aug 2005
- Posts
- 5,293
- Location
- York
Mines 13.5lbs for 6" front and back, what weights are you guys running?
13.5lbs???? what the hell is that made of? My Heckler weighs in at 28lbs
Mines 13.5lbs for 6" front and back, what weights are you guys running?
Obviously I would recommend the Stiffee frame, but it's a completely different frame to some of the cheaper 'alternatives' being mentioned above. The thing you have to remember is that a frame is a frame but you pay the extra for the quality of the build and finish. If you're going for one, make sure you get the current stock model and not the new one coming out (cable guides on bottom side of the top tube) I have spoken to Cove's distributors and they said that the newer model is built to a budget due to rising manufacturing costs. If you were to produce the old frame now, it would cost around £800 retail.
Off the top of my head, the only real alternatives to a Stiffee are the Chameleon and the Pha5e, and the Pha5e is no longer in production.
Also, I dont think the geometry is suited to a F36 fork (160mm?).

13.5lbs???? what the hell is that made of? My Heckler weighs in at 28lbs

I guess you mean 13.5kg?Mines 13.5lbs for 6" front and back, what weights are you guys running?
Yeah me too, MTB videos are addictive and I’ve cancelled days out to watch the DH World Cup.Guys is it normal to endlessly browse bike websites and watch bike videos?
I seriously think i have OCD. Ever since buying my bike i've been addicted. This forum doesn't help either lol
Guys is it normal to endlessly browse bike websites and watch bike videos?
I seriously think i have OCD. Ever since buying my bike i've been addicted. This forum doesn't help either lol
Lightweight, strong wheels - Roval Traversee
Light pedals, tyres (for their size) and the XT or SRAM X0 running rear.
I could knock a bit more off with an XTR Crank, cassette and lighter brakes but it's a high cost for a max saving of about 500g (1lb)
Lightweight, strong wheels - Roval Traversee
Light pedals, tyres (for their size) and XT & SRAM X0 running rear.
I could knock a bit more off with an XTR Crank, cassette and lighter brakes but it's a high cost for a max saving of about 500g (1lb)
Yeah me too, MTB videos are addictive and I’ve cancelled days out to watch the DH World Cup.
Looking forward to NWD 10 and Kranked 8 films later this year.
Roadies, what pressures are you running in yer tyres?.
Have Schwalbe Stelvio's on just now sat at 100psi. Dropped them down a little to 85psi the other day and the whole bike felt much less harsh over rough tarmac but I'm concerned I should really be running them nearer 100psi to prevent pinchy punctures?.
Yes, they are 160mm. Not a good idea then?
Im still swaying towards the Stiffee FR in White... boy, does it look good![]()
Should say on the sidewall what the max is or even an actually pressure to put them to. Road bikes I've build are between 100-120psi. I think tubs go higher?

Yep, Stelvios are recommended to run at 100-120psi but they feel so much more comfortable at much less than that, which is why I was asking/curious as to what psi you lot were running at ( roadies that is, far too many MTB'ers in here/Far too little roadies ).![]()
![]()
The 914's will have Carbon frames, pics of the other 2010 bikes here : http://www.vtt-mtb.com/pages/GAMME_...esty_spicy_xcontrol_froggy_et_DH-1547448.htmlThe lapierre's are really nice bikes, i demo'd a 316 and it was very impressive and they seem good value for money spec wise. What are the changes from 09-10 going to be?
Yep, Stelvios are recommended to run at 100-120psi but they feel so much more comfortable at much less than that, which is why I was asking/curious as to what psi you lot were running at ( roadies that is, far too many MTB'ers in here/Far too little roadies ).![]()
![]()