• Notice regarding image hosts and attachments. See here.

Big Bike Thread

Status
Not open for further replies.
Roadies, what pressures are you running in yer tyres?.

Have Schwalbe Stelvio's on just now sat at 100psi. Dropped them down a little to 85psi the other day and the whole bike felt much less harsh over rough tarmac but I'm concerned I should really be running them nearer 100psi to prevent pinchy punctures?.
 
Obviously I would recommend the Stiffee frame, but it's a completely different frame to some of the cheaper 'alternatives' being mentioned above. The thing you have to remember is that a frame is a frame but you pay the extra for the quality of the build and finish. If you're going for one, make sure you get the current stock model and not the new one coming out (cable guides on bottom side of the top tube) I have spoken to Cove's distributors and they said that the newer model is built to a budget due to rising manufacturing costs. If you were to produce the old frame now, it would cost around £800 retail.

Off the top of my head, the only real alternatives to a Stiffee are the Chameleon and the Pha5e, and the Pha5e is no longer in production.

Also, I dont think the geometry is suited to a F36 fork (160mm?).

Yes, they are 160mm. Not a good idea then?

Im still swaying towards the Stiffee FR in White... boy, does it look good :cool:
 
Guys is it normal to endlessly browse bike websites and watch bike videos?

I seriously think i have OCD. Ever since buying my bike i've been addicted. This forum doesn't help either lol
 
Lightweight, strong wheels - Roval Traversee
Light pedals, tyres (for their size) and XT & SRAM X0 running rear.

I could knock a bit more off with an XTR Crank, cassette and lighter brakes but it's a high cost for a max saving of about 500g (1lb)

Guys is it normal to endlessly browse bike websites and watch bike videos?

I seriously think i have OCD. Ever since buying my bike i've been addicted. This forum doesn't help either lol
Yeah me too, MTB videos are addictive and I’ve cancelled days out to watch the DH World Cup.
Looking forward to NWD 10 and Kranked 8 films later this year.
 
Last edited:
Guys is it normal to endlessly browse bike websites and watch bike videos?

I seriously think i have OCD. Ever since buying my bike i've been addicted. This forum doesn't help either lol

Yes, I used to too! But I just try to limit myself to pinkbike - video of the day!

Lightweight, strong wheels - Roval Traversee
Light pedals, tyres (for their size) and the XT or SRAM X0 running rear.

I could knock a bit more off with an XTR Crank, cassette and lighter brakes but it's a high cost for a max saving of about 500g (1lb)

Sounds good. Yeah, + the weight saving is most noticeable the closer it is to the edge of the wheels. And you really have to pay a premium for super light cassettes.
 
Lightweight, strong wheels - Roval Traversee
Light pedals, tyres (for their size) and XT & SRAM X0 running rear.

I could knock a bit more off with an XTR Crank, cassette and lighter brakes but it's a high cost for a max saving of about 500g (1lb)


Yeah me too, MTB videos are addictive and I’ve cancelled days out to watch the DH World Cup.
Looking forward to NWD 10 and Kranked 8 films later this year.

Ha, thats commitment! Where abouts in Solihull are you mate? I work in Solihull.
 
Roadies, what pressures are you running in yer tyres?.

Have Schwalbe Stelvio's on just now sat at 100psi. Dropped them down a little to 85psi the other day and the whole bike felt much less harsh over rough tarmac but I'm concerned I should really be running them nearer 100psi to prevent pinchy punctures?.

Should say on the sidewall what the max is or even an actually pressure to put them to. Road bikes I've build are between 100-120psi. I think tubs go higher?
 
Yes, they are 160mm. Not a good idea then?

Im still swaying towards the Stiffee FR in White... boy, does it look good :cool:

You could wind them down (TALAS), but in general I think the F36 is too much of a heavyweight fork for the frame. It really depends what you'll be doing, 140mm is a lot of travel and roughly the optimum for the frame. Doubt you'll have any problems with stiffness on the F32 if you go for the QR15.
 
Last edited:
Should say on the sidewall what the max is or even an actually pressure to put them to. Road bikes I've build are between 100-120psi. I think tubs go higher?

Yep, Stelvios are recommended to run at 100-120psi but they feel so much more comfortable at much less than that, which is why I was asking/curious as to what psi you lot were running at ( roadies that is, far too many MTB'ers in here/Far too little roadies ). ;) :p
 
Thinking about getting a set of Shivers off Ebay for my Stinky, fixed the creaking on it, had to buy a new Crank Set. Got the Race Face Downhill one, rides sooooo much cleaner. Anyone for any ideas about the Shiver suspension though or others? I wanna get second hand ones because they are really expensive for Triple Clamp suspension, maybe Boxxers?
 
Ordering my new bike soon.. A Lapierre 316. Not the most spec'd out one but i dont do much XC/Uphill :p Im either going for the '09 or the '10 model depending on the deal im getting :) What ya guys think of these bikes?
 
The lapierre's are really nice bikes, i demo'd a 316 and it was very impressive and they seem good value for money spec wise. What are the changes from 09-10 going to be? is it mainly cosmetic and a stupid price hike or a complete new spec?
 
Yep, Stelvios are recommended to run at 100-120psi but they feel so much more comfortable at much less than that, which is why I was asking/curious as to what psi you lot were running at ( roadies that is, far too many MTB'ers in here/Far too little roadies ). ;) :p

100 on my Stelvios. Feels fine tbh
 
Yep, Stelvios are recommended to run at 100-120psi but they feel so much more comfortable at much less than that, which is why I was asking/curious as to what psi you lot were running at ( roadies that is, far too many MTB'ers in here/Far too little roadies ). ;) :p

Can't comment on it due to not riding road. As long as you won't get pinch flats and damage the rim or it feels a bit slidy when cornering I would run what you prefer!

Just remember if it rolls sideways too much it could unseat.
 
Status
Not open for further replies.
Back
Top Bottom