BitFenix Prodigy ITX build

Nunzio said:
Well I took a look this morning, pic posted on this thread, http://forums.overclockers.co.uk/showthread.php?t=18420652

I think it will fit in the case, as its 3mm taller than the Lynx that OcUK used when they built one for the demo pics, now, i dont know if that included putting two fans in the top, but i think it should be ok, and can always remove that lump of plastic off the top of it which might cut the size down a 1mm or two.

I was first going to go with the H80, but heard very bad things about them, but still am waiting to see how yours turns out!

Your ram is looking nice. :) hope you get your 9-10-10-21-1T working.
Click to expand...

thanks chap, interesting thread :) lets hope it all works out :)
 
UPDATE 3.2.4

OK i think i have found my max oc for my ram on this board, i upped the BCLK to 103.1 my volts were upped from DRAM 1.56v to 1.57v and VTT from 1.053v to 1.076v to give me 2199MHz if i went 103.2 (2201MHz) it will not boot so i think this has a brick wall @2200MHz

Below are the results and they have improved over the 2133MHz oc.

capturefit.png


it would be interesting to see if anyone has the samsung green ram and the Asus P8Z77-I Deluxe mobo to see what they can achieve?

who knows i may even buy it one day to see :p
 
Last edited:
UPDATE 3.2.5

I JUST CANT HELP MY SELF!!!!!!!! i think i have issues :p

taken from my other thread

buzzlightweight said:
i dropped back to 103.1 bclk and played with the secondary timings with great results. THIS will be my ram oc :)

2199mhz bclk 103.1 9-10-10-21-1

2201mhz bclk 103.2 9-11-11-35-1
Click to expand...


although i do feel happy with my OC so im gonna leave it alone............... i promise
 
Last edited:
Nunzio said:
Looking good. Just NEED the case!!
Click to expand...

Samsara said:
good log! looking forward to seeing it all in the case :)
Click to expand...

me too, i just hope it gets dispatched in time for a monday delivery :)

xbournex said:
It won't. It'll display the lowest score as its final.

Nice work on the OC.
Click to expand...

i thought as much :) and thanks, i have managed to tighten up the secondary timings and it has really improved my read/write/latency scores on aida64 and maxx mem :)

JoeF1 said:
Any news on the case matey?

The GFX card makes the Mobo Look tiny!! haha
Click to expand...

eta is still....... FRIDAY THE 13TH lol
 
someone told me to tighten some times with good results! another round of memtest during work tomorrow :p


buzzlightweight said:
ok just going by 8packs advice and changing my tRFC to 114 i have further increased my read/write!!!

DRAM 1.57v
VTT auto (1.053v)

bclk - 103.1
MHz - 2199
timings 9-10-10-21-1T

tWR - 16
tRFC - 114
tRRD - 7
tWTR - 8
tRTP - 8
tFAW - 24
tCWL - 8

below are the results before i changed my tRFC from 148 to 114

(tRFC 148)



(tRFC 114)



i will run memtest again when i go to work tomorrow to test stability, cheers 8 pack
Click to expand...
 
23RO_UK said:
I'm using the same memory settings as yours on just 1.55V with my ASRock Z77 E-ITX :D


Couldn't be arsed waiting on the Prodigy so went with the Silverstone TJ08-E instead, no regrets there :)


http://forums.overclockers.co.uk/showthread.php?t=18420836

My build ^^^
Click to expand...

RAM - 8 GB (2x4GB) Samsung Green DDR3 PC3-12800C11 1600MHz 30nm Dual Channel running @ 2133MHz (10-10-10-24 2N) @ 1.45v
Click to expand...

says different in your thread? are you running 2200MHz? have you managed any higher?

i have managed to stabilize 9-10-10-20-1T @ 1.58v and stock volts for VTT and VCCSA so im still tweaking atm :)

stock volts for this ram is 1.585 so im getting there :)

nice build btw
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom