Hazro - Any Update?

HornyRhino · 19 Dec 2009 at 02:03

sorry m8

yes i meant you mrk

thanks m8 for the advice ill get one ordered and contact you when it in the post for the software links

thanks again mrk.

and merry xmas

mrk · 19 Dec 2009 at 02:06

FreeStream · 26 Dec 2009 at 13:11

mrk said:
By Mark do you mean me? If so then my name isn't Mark, lmao

The Blue Eye Pro will give you the best calibration and thus getting the absolute best out of your monitor. I borrowed work's Spyder probes in the past and have used many calibration software too but only the Lacie software gave the results I expected.

The XRite EyeOneDisplay2 is the exact same probe as the Lacie BlueEye Pro so get the Xrite and I'll hook you up with the Lacie software.

I didn't know the iOne Display 2 could use the Lacie software! Would you mind hooking me up with the OS X & W7 version of it? As the XRite software is inconsistent sadly

Also the red/blue/green adjustments on my latest rev HZ26Wi seem to do nothing at all? They just change barely anything at all, so when calibrating I just set it to 6500k using the pre-sets *shrug* normal?

Edit: Plus does HDMI carry audio to the Audio out port? Wondering if I will need optical out...

As for Hazro, *apparently* I was talking to someone who deals with Hazro (He gets stock from them/returns) that there are LED based monitors coming early next year with every connector imaginable! If this turns out to be true then I might grab myself one!

By the sounds of all the power bring issues I might buy myself one of these replacement ones just incase

Mick-1965 · 27 Dec 2009 at 12:47

Concorde Rules said:
I didn't know the iOne Display 2 could use the Lacie software! Would you mind hooking me up with the OS X & W7 version of it? As the XRite software is inconsistent sadly

Also the red/blue/green adjustments on my latest rev HZ26Wi seem to do nothing at all? They just change barely anything at all, so when calibrating I just set it to 6500k using the pre-sets *shrug* normal?

The red/blue/green adjustments dont do anything at all after the firmware upgrade.

It also may be worth checking the other pre-sets to see which is natively closer to 65k.
On My 26Wi setting it to 7500k setting is closer to real 65k than the 6500k setting.
When testing this though, make sure no profiles are loaded and bear in mind the temperature also varies with luminance .

BTW Im using Basiccolor software with an x-rite i-one display 2 device.

mrk · 27 Dec 2009 at 13:07

Ah yes do you have an email address I can fwd details to Concorde Rules?

Btw the Lacie BlueEye probs is the exact same probe as the Greteg Macbeth/XRite EyeOne Display 2

DJ Prem · 3 Jan 2010 at 14:16

Is Hazro gone out of business as thier wesbite is 'no longer there'.

go.mole · 3 Jan 2010 at 21:17

The .com website is half there, it's missing its stylesheet.

But! if you look at www.hazro.co.uk site is says new site on the 14th of Jan

The lunch of the new screen is here?

DJ Prem · 4 Jan 2010 at 09:43

Looks like they were updating the site when I looked but good to know that they are still around.

go.mole · 15 Jan 2010 at 16:18

go.mole said:
The .com website is half there, it's missing its stylesheet.

But! if you look at www.hazro.co.uk site is says new site on the 14th of Jan

The lunch of the new screen is here?

Well the 14th came and went...

jeness · 16 Jan 2010 at 00:13

Something tells me that message will be there for a looong time...

Calneon · 17 Jan 2010 at 03:12

My Hazro is starting to do that thing where you can see shapes of stuff on the display being burned into the screen, if you know what I mean. It's getting quite noticeable when you have a flat colour and move it over the screen. I don't want my Hazro to die

. Are they still upgrading firmware?

smilertoo · 17 Jan 2010 at 03:47

Brown in is meant to be fixable, leave a screensaver going that goes between bright/dark.

Lum · 17 Jan 2010 at 04:39

I find that running this fullscreen helps.

Don't do that if you have epilepsy though.

Calneon · 18 Jan 2010 at 12:17

Lum said:
I find that running this fullscreen helps.

Don't do that if you have epilepsy though.

Wow thanks a bunch for that! I just ran something similar (this) overnight and now it looks good as new again. Gave me a scare when I woke up though, there was a brown patch on the left side that seriously looked like it was burned and it was way too hot to touch, all good now though.

plavalaguna · 18 Jan 2010 at 13:42

eta 18th Jan now .... :S

FreeStream · 26 Jan 2010 at 00:12

8 days later and still nothing.

Oh dear

HornyRhino · 26 Jan 2010 at 00:56

well sugar me timbers

and call me a chocolate log boat

i was scanning through a few of my older obscure forums and found an uk outlet that deals apparently with hazro products through industry, commercial and the IT side but have an online shop as well.
23" , 26" and the 30" models

23" is in black or silver, Qtn : 30
26" is in black only
30" is available in silver and black. Qtn : 100+

all brand new from what i can see...

just thought id point out this for people still looking for them.

leave your email address with me using trust and i will provide any further links..thats if your allowed to supply outlets via trust as i know you cant in main.

kind regards

HRhino

**P.S. might be a good source for a new PSU as the outlets sells loads of branded screens

plavalaguna · 29 Jan 2010 at 12:19

well, the website is back online

go.mole · 29 Jan 2010 at 12:57

Indeed it is back, the problem is that it's showing only the old models; old none i models

I really hold no hope of Hazro ever doing well. They mucked up too badly last time around.

smilertoo · 30 Jan 2010 at 14:59

So you cant even post a competitors web site for a product OC dont even sell anymore?