Associate
Wondered as much, i'm betting they haven't actually changed anything. And are just replacing the units and hopeing for the best. (Hope this isn't the case)
NEC LCD20WGX2 review *** UPDATED 25/02/06 ***
- Thread starter igors
- Start date
Associate
hi, flick the stick to the far right you will see your serial number
Last edited:
Associate
Well shoot me through a cannon spoke way way too soon.... light blled in 4 cornors this time..... not as bad as last one as it also had a stuck pixel. 631 serial number.
Come on NEC dont bullsh*t us about get the job done first time.....
H
Come on NEC dont bullsh*t us about get the job done first time.....
H
Last edited:
Associate
- Joined
- 5 Nov 2005
- Posts
- 2,182
Just to give u an update I had slight backlight bleed in one corner I have now had it for about 1 and half months and its completely cleared up and all is now perfect 
So just to say to everyone only try to get them replaced if your screen really has problems like some of the unlucky guys above.
So just to say to everyone only try to get them replaced if your screen really has problems like some of the unlucky guys above.
Associate
bob m8, wots your serial first 3 digets please, thanks. 
Associate
Sorry to hear that m8wiko said:well got my replacement today after 2 hours gaming i have bleed in all 4 corners, does your replacement series begin 621, mine does as was my last nec
Associate
Not what I was hoping to hear, I just hope that this doesnt end up like another 2005fpw round robin. Will be opening mine up next Tuesday with some concern. This is not good news.
Got mine yesterday very please with picture not noticed any backbleed either just 1 red stuck/lazy pixel on a black back ground but i'm going to stick with it hardly notice it at all only if i look hard.
Just one question thou want the best product to clean the screen seen it somewhere on the forum but dammed if i can find it.
Just one question thou want the best product to clean the screen seen it somewhere on the forum but dammed if i can find it.
Associate
- Joined
- 5 Nov 2005
- Posts
- 2,182
wiko said:bob m8, wots your serial first 3 digets please, thanks.
I will have to check where can I find it?
Associate
hi, flick the stick to the far right you will see your serial number
Associate
moveable nob then 
Associate
bleed in left corner only now, after 24 hours. Its very faint so i will give it a week to burn in. Big improvement on the last model image wise.
Associate
Lol, eesay malaga philae mu (Greekish)wiko said:moveable nob then
Associate
Associate
Argh OCUK have them on the special offer page! Pay day cant come fast enough!
Does seem to be a bit of pot luck regarding the revision you get, can any one at OCUK confirm if these have '631' serial numbers?
Does seem to be a bit of pot luck regarding the revision you get, can any one at OCUK confirm if these have '631' serial numbers?
Hi, good to hear that. I would personally suggest that users wait for a couple of days (sometimes even week) until monitor is "settled and burn in" as initial impressions when you start the monitor from cold can be quite deceiving. Even I had slight bleed in one corner only and after few days monitor settled down and now is peach black (I already posted the pictures of my screen in the dark).wiko said:bleed in left corner only now, after 24 hours. Its very faint so i will give it a week to burn in. Big improvement on the last model image wise.
As I already explained in some of my previous posts, your picture improvement is related with the fact that panel uniformity is much better now.
WOW, the monitor is sooo bright. I was just watching some game videos i had before on this new monitor and its like i havent seen them before, there seems to be so much detail that i seemed to miss with my 17inch CRT.
Very impressed so far for my first LCD. However i was using the UDPixel program from this link http://udpix.free.fr/ and i set the Flash Window setting to 10 and pressed start and it came up with 8 flashing boxes from the top left in a diagonal line? Does this indicate 8 dead/stuck pixels? I cant seem to notice them when changing to any colour it seems.
Any advice please?
Very impressed so far for my first LCD. However i was using the UDPixel program from this link http://udpix.free.fr/ and i set the Flash Window setting to 10 and pressed start and it came up with 8 flashing boxes from the top left in a diagonal line? Does this indicate 8 dead/stuck pixels? I cant seem to notice them when changing to any colour it seems.
Any advice please?